Search results

Re: m1a accuracy The USN has a contract out using IMR4064 41.7, FC head stamp on the brass, 210M primers with the 175gr Sierra match King. Have used the load oin my standard M1A shot veery well... For more load data go to M-14 Forum. http://m14forum.com/ Good shooting....

Re: Sierra MatchKing .338 Cal 300gr Availability We are shooting Berger bullets and with a BC of .818 G1 and at G7 .419 they can be at Sinclair Int, http://www.sinclairintl.com/ as well as many other places..

Re: 338 Edge Dies? You can order Redding dies from Sinclair for a lot less and same product. http://www.sinclairintl.com/

Re: lapua brass .308 and .338 One of the best on the market......... You get what you pay for........

Re: Powder choice for 16" AR15 loads H 335, Tac, Win 748, and BLC2 up 60gr bullets. 69-75gr Varget and RL-15 seem to work well...

Re: Loading for a SA M1A Have used the M-14 and M1A, each one rifle has a different chamberas do all rifles. If using the M1A in three gun or simular type of shooting, small base sizing would be to your best interest, chamber heating up my experience has shown that small base sizing is your...

Re: 300 WM- Re 25 & 208 Amax? Win brass, 215M, 75gr of RL-25 made one hole group at one hundred yards, did this looking for a good group no other data. Went back to 200gr bullets...

Re: 200grn Accubond Loads? 75gr RL25 215M win case prepped in a 300 win as with all loads work up.

Re: Ideas for Patrol Rifle Training Get in touch with the NRA and set up a training you unit will be given a couple of spaces free..... Jeff Hall is one on their instructors a top instructor pistol and rifle.......http://www.atactv.com/video/136/Force%20Options-%20Jeff%20Hall...

Re: 308 deer/elk bullet suggestions Loaded up some 180 gr Speer spbt bullets with RL-17 @ 47.5 gr where the best group was in Federal 308 match cases using 210M primers, shooting from a 22" barrel with a 1/10 twist the 2742fps has shot well in three 308 so far. Have used the bullet for...

Re: 22lr Ammo question? There is a few that shoot a 22 at long distance. At the present shooting GEMTEC's 22 ammo and have never been more pleased. http://www.gem-tech.com/store/pc/viewcategories.asp They have a good product and costs a little more than standard 22's but its a choice as to...

Re: disappointed with 300 win mag reloading manual Have had very good luck with RL-25, did a work up and with just flashholes done and trueing primer pockets. Sizing Win brass as close to chamber as possible. Shooting the 200gr SMK for matches and the 200 SGK for hunting they shoot about...

Re: M1a reloading with R-15 / 175 smk The military is loading 175gr SMk with 41.7 real close of IMR-4064, 210M in a military case, did the load and its shooting 3/4" at a hundred yards. There is a great deal of information on the M-14 Forum.......

Re: handload reciepe for .223 w/ 69gr. sierra hpbt varget and RL-15 so far have been the best groups with the 69 best sub group was 24.5 of RL-15 win brass 205M and with the 75gr bthp Hornady 24gr of varget with win brass 205M all shot good groups past 300 yds......

Re: need load data for M1A Good post on information you may want to go to the M-14 Forum for more reloading information........

Re: M1a reloading with R-15 / 175 smk lots of information on the M-14 Forum

Re: favorite 308 load for 600+ out of a 20" barrel? couple of loadds that have worked very well is IMR 4064 @ 42.2 with a 175ge SMK and 45gr Varget with the same 175gr

Re: M1A - Full Length Sizing Found that using a SB die works best in a M1A rifle.... You may want to go to the M-14 Forum and ask the same question watch the answer to your question.....

Having a 308 Win with a 26" barrel have thought of cutting it down to say 20"......My thought it would have less barrel movement thus it would shoot a tighter group.... Have seen a movement to 20" in law enforcement and in some tactical rifle matches when moving from fire point to fire...

Re: Both upper and lower back pain Would see a Doctor they are to get checked out and have a complete physical........ As for a bone popper ours has helped with a great many sprains and pulled tissues back arms and legs....... Best to you get fixed.........