G-Series FN FAL, the nicest by far I've seen in 40 years of looking:
- Nov 3, 2010
- 11,131
- 24,888
Israeli FAL clone by Arizona Response Systems:
First post for me I think, been lurking and soaking up the information for a long while.
Pic of my Desert Tech MDRX, currently sitting with a 20" 6.5 Creedmoor barrel in it, Swampfox Arrowhead 1-10 SFP for the optic. Rifle next to it is the first rifle I built, which was a fun little experiment in how accurate 7.62x39 Russian could be made (16" barrel) Pic was originally taken for size/length comparison.
And a grouping from the MDRX at 100yd during the initial barrel break-in. Pretty good considering I'm only a couple years into the hobby and still learning as much as I can for PRS stuff
Pic of my Desert Tech MDRX, currently sitting with a 20" 6.5 Creedmoor barrel in it, Swampfox Arrowhead 1-10 SFP for the optic. Rifle next to it is the first rifle I built, which was a fun little experiment in how accurate 7.62x39 Russian could be made (16" barrel) Pic was originally taken for size/length comparison.
And a grouping from the MDRX at 100yd during the initial barrel break-in. Pretty good considering I'm only a couple years into the hobby and still learning as much as I can for PRS stuff
My new to me Ruger Mini 14 in 6.8spc. I’ve been looking for one for sometime and was extremely lucky finding this one. Christmas came early for me!
One of 150 Type 2 receiver 50.64 Para FAL's imported by Rogak in 1971:
My 5.45x39 Bulgarian SLR104 ( AK105ish clone ). Aimpoint T2.Super nice shooting gun.
I'm guilty of overlooking the USA-built Steyr AUGs until recently. They're certainly every bit the equal of the pre-ban guns - perhaps even superior with flat top upper and better triggers. Dare I say that after almost half a century this design remains still "AUGsome"?!?
Last edited:
Seekins SP10 in 6.5 creedmoor , added a magpul PRS stock and a EC Tuner Brake, also dropped a Trigger Tech Diamond AR-10 trigger in, gonna do some load testing this weekend
Attachments
If Darth Vader carried a Cold War Battle Rifle instead of a light saber, I bet it would look a lot like this HK91 outfitted with all these Spuhr Swedish AK-4D accessories:
SOCOM16 in Walnut
PSL 54
KP9
WASR with a new barrel and rivets from Meridian.. got a lot of rounds through it over the years.
Will post updates to my Galil and Dissident arms shotgun when I get back in a few months.
PSL 54
KP9
WASR with a new barrel and rivets from Meridian.. got a lot of rounds through it over the years.
Will post updates to my Galil and Dissident arms shotgun when I get back in a few months.
6.5 Grendel Build
BSF 20" barrel
Superlative adjustable gas block
BCM Rail
Larue Trigger
Aero Bolt
Vortex Viper PST Gen 2 5 to 25 x 50 scope
Silencerco ASR mount with Saker 762
BSF 20" barrel
Superlative adjustable gas block
BCM Rail
Larue Trigger
Aero Bolt
Vortex Viper PST Gen 2 5 to 25 x 50 scope
Silencerco ASR mount with Saker 762
An AW95xx serial numbered PTR GI, it’s the softest recoiling G3 clone I ever had and that includes a Springfield that I owned. It eats every surplus M80 that I’ve thrown at it. This has a heavy buffer, tigger job and a HK21 buttpad. It rivals my AR-10s in recoil, now I need to put a TA11 on her…
Last edited:
FN SCAR17 with the one must-have upgrade - Geissele trigger. SPR grip is nice for those with big paws. The SCAR is reportedly hard on glass, but I think this Nightforce ATACR F1 1-8x24 in Spuhr mount will hold up.
Acquired this today for a good deal, even by pre Covid standards. Pretty excited to get out and run it this weekend on some steel and left-over pumpkins!
Hey, folks.
I'm new here. Here's my 6.5 CM. Faxon 20" heavy fluted barrel, Live Free receiver set, Failzero BC with a Rubber City bolt, cool carbon fiber chicken wire handguard from Brigand Arms, Hiperfire trigger and some economical Vortex glass, in a LaRue mount, I'm still working on it and really need to cut my teeth on load development right now. Factory Hornady ammo is giving me some horrible 100+ fps spreads and 3 shot groups right under 1 moa, so it's hard to determine if this barrel is acceptable or not.
I'm new here. Here's my 6.5 CM. Faxon 20" heavy fluted barrel, Live Free receiver set, Failzero BC with a Rubber City bolt, cool carbon fiber chicken wire handguard from Brigand Arms, Hiperfire trigger and some economical Vortex glass, in a LaRue mount, I'm still working on it and really need to cut my teeth on load development right now. Factory Hornady ammo is giving me some horrible 100+ fps spreads and 3 shot groups right under 1 moa, so it's hard to determine if this barrel is acceptable or not.
I bought these 3 New In The Box/Unfired rifles last month from an Estate Sale.
...DA-YUM, you scored for sure!! Valmet and IIRC, SIG 57 ?? ...been years since I've seen either.I bought these 3 New In The Box/Unfired rifles last month from an Estate Sale.
SG 510 T AMT in 308. These were made for the American Market.
The other firearm is a Valmet S62 in 7.62x39.
Last edited:
Beautiful pair!
I just picked up a CMMG Banshee MK10 300. This is my first 10mm firearm. I hope to shoot it soon. I may buy a S&W M610.
...that Ruger would look a whole lot better in one of those retro folding stocks that Midwest is putting out now...but that's the nostalgic old man in me talkin`, LOL
...from what I can recall, that Valmet is a milled receiver and one of the more accurate AK platforms made at the time, some said even better than the South African R4's or Israeli Galil's...
I hate that folding stock on the Mini 14. I am going to pickup a Walnut Stock and Handguard for it.
My wife's SU16CA. Att it was the lightest 5.56 that took AR mags.
My slightly modified 10/22
WASR underfolder
MAK90
PTR91GI
HRA Garand from DCM ($175) in Fajen stock
My slightly modified 10/22
WASR underfolder
MAK90
PTR91GI
HRA Garand from DCM ($175) in Fajen stock
The Brownell's BRN-180 upper is a real sleeper. Designed and produced by PWS for Brownell's, it is based on Eugene Stoner's landmark AR-180 short stroke gas piston, multi-lug rotating bolt concept. Thia upper will drop onto just about any AR' lower out there. Since there's no need for the AR-15 lower receiver extension with this AR-180 design, specialized lowers incorporating a Mil-Std 1913 rail that accepts folding stocks or pistol braces can be utilized. This provides a much more compact form factor than any collapsable stock. The BRN-180 has an exceptionally light bolt carrier plus a rubber recoil buffer, resulting in surprisingly light felt recoil. This is all the more surprising, given thath this pistol only weighs 5 LB 10 OZ as shown.
AR Pistol with 7.5" barrel
MSAR with 16" barrel
MSAR with 16" barrel
Tax stamp on Monday, rattlecanned by Friday. 
Similar threads
