Custom Cut Rifle Cases (Show Em)

[Jethatsme]

So as I layout my setup for a new rifle case cutting, was curious to see how others have layed out their gear. Show us what you have!! Also feel free to name the parts/gun list that's in your setup.

My planned setup:

AR15 with a 16" Upper
Samson Rail
holosun red dot
burris AR Tripler 3x Magnifier
BCM Mod1 muzzle brake
Magpul ACS-L butt stock

18" Upper
SLR Rifleworks rail
Tangent Theta 3-15x scope
AD Recon catilever mount 20 moa cant
1/8 Twist SS fluted match grade barrel
Fail Zero bolt carrier
atlas bipod

Ruger 1911 Night Watchman Talo Edition

will post the finished cut once ready

 

[Terry H]

I just did one for my RPR. I bought the 44" case from Sam's Club for $70. Ordered a piece of Kaizen foam for $25 from Amazon to replace the pluck and pull. I loved the look of the cases like Peak that had felt on the foam so I also ordered a piece of $7 felt from Amazon as well. I cut the foam to fit the case and glued the felt to the foam. Cuts were made with a disposable razor knife. I saved the cut out pieces and glued them back in the places that were cut shallow in the foam. I also glued felt on the bottom piece of foam in the case. Looks nicer where the top foam is cut all the way through. It's not a Peak or a Pelican but for a little over $100 and a few hours time I'm happy with it.

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4323\/35797565161_a10bec9e81_c.jpg"}[/IMG2]

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4209\/35797564171_65223e05d4_c.jpg"}[/IMG2]

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4265\/35120336003_29a67f8120_c.jpg"}[/IMG2]

 

[euwanderer]

Nice work. I need to do something like that

 

[William K Rusli]

[No message]

 

[The Anarchy]

Here's my Lapua in it's travel case

 

[The Anarchy]

Here's my 300 win mag in it's travel case

 

[The Anarchy]

[No message]

 

[The Anarchy]

[No message]

 

[Jethatsme]

Here's my 300 win mag in it's travel case

Nice! What rifle setup is that?

 

[Jethatsme]

Finally got it cut and returned.

 

[strikeeagle1]

I'll play. Here's one of mine.
LaRue OBR 16", S&B 5-25x , Atlas, SOCOM2 in a Pelican 1750.

 

[thebigbeardedchef]

I just did one for my RPR. I bought the 44" case from Sam's Club for $70. Ordered a piece of Kaizen foam for $25 from Amazon to replace the pluck and pull. I loved the look of the cases like Peak that had felt on the foam so I also ordered a piece of $7 felt from Amazon as well. I cut the foam to fit the case and glued the felt to the foam. Cuts were made with a disposable razor knife. I saved the cut out pieces and glued them back in the places that were cut shallow in the foam. I also glued felt on the bottom piece of foam in the case. Looks nicer where the top foam is cut all the way through. It's not a Peak or a Pelican but for a little over $100 and a few hours time I'm happy with it.

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4323\/35797565161_a10bec9e81_c.jpg"}[/IMG2]

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4209\/35797564171_65223e05d4_c.jpg"}[/IMG2]

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4265\/35120336003_29a67f8120_c.jpg"}[/IMG2]

damn that is one sexy gun.

 

[ZeroMOA]

 

[Jethatsme]

Great set-up @ ZeroMOA. Love the Ammo Carry Case.

 

[Terry H]

damn that is one sexy gun.

Thank you! I'm in love with the thing. lol...

 

[witchazel]

Very nice. Could everyone please include the type case?

 

[Sogan]

Pelican 1750. Completed using a homemade hot wire table.

 

[witchazel]

Pelican 1750. Completed using a homemade hot wire table.

Very nice