My cheap ass home vise can't keep a barrel from spinning no matter what. I can't even do muzzle devices with all the tricks (paper, cardboard, rubber jaws, etc). Is there a hobby grade barrel vice that works for putting on barrels/muzzle devices that so simple even an idiot PhD like me can use it? Really tired of this and gonna miss a match now

I bought this used and had Fisher T&C spin up a Wilson #4 300Blk 1:8T 16" barrel for it.

The action is super smooth and rock solid. The barrel shot lights out. I had it recently cut down to 9 in with the goal of filing a tax stamp to have a SBR, but I'm headed in the direction of messing with a Vudoo 22LR. I have no idea how the barrel will shoot since it was cut down and I haven't reassembled it since it was cut and recrowned (LPR Gunsmith in NH).

$850 shipped for the action, $1000 with the Timney HIT trigger.

If you want the barrel, I would let it go for $200. You can turn file a Form 1 and torque everything together once it is approved.

If you want you everything I would do $1100.

SOLD

Up for sale is a used MPA Matrix 6x47L rifle, ammo & reloading package. Everything you need to shoot and PRS or bench rest match (Minus Optic, Shooting bag/bi-pod).

I'm in no hurry to sell, I just don’t see shooting the rifle in a PRS match anytime soon as I have a different rifle I'm competing with currently. Would rather someone else enjoy this fantastic rifle. Will entertain offers on just the rifle and new barrel, BUT WILL NOT SELL RELOADING COMPONENTS IF THIS LISTING IS STILL UP. Text/Call 423-599-3449. Full breakdown of what’s included below. Don’t hesitate to ask any questions or for additional pictures. Asking $4100



- MPA Matrix Curtis Axiom - $3500 New

• 26” MPA barrel chambered in 6x47 Lapua
• Curtis Axiom Action
• Trigger Tech 2 Stage Diamond Trigger
• PVA Jet Blast Brake
• 1754 rounds on factory installed barrel (still shooting 1/2”)

• New never installed MPA 6x47 pre-fit barrel (cut with same reamer) - $700 New
• New MPA Barrel Change Combo - $125 New (Not Pictured)
• New 100rd Alpha OCD Brass 6x47 (pre-production 6.5x47 head stamp) - $135 New
• New 10x 1lb Hodgdon H4350 (Matching Lot) - $550 New
• New 3x Bricks (1000 per brick) CCi 450 Primers - $300 New
• New 2x Unopened 500rd D.Tubb DTAC 6mm 115gr Projectiles, 1 opened box roughly 400 left (Matching Lot) - $525 New
• Used Redding Type S Match 6x47 Die set (Comp Seater, Bushing Neck Die & Body Die) - $268 New

• 286 rounds of hand loaded 6x47, 115gr DTAC, in 5&6 fired Lapua Brass (Annealed after each firing). Precision loaded on RCBS Matchmaster. ***Buyer assumes all risks with shooting my reloads and must sign release to such.*** I’m factoring no value to this loaded ammo but will include it in the sale if you want it.

Like new Burris XTR iii 5.5-30x56 scr 2 mil non ill USA version. Used very little. Needing to move for another project. 900 shipped and insured.
View attachment 8418265
View attachment 8418269View attachment 8418270

Unexpected medical stuff came up that I need to take care. Letting go of my 2022 Accuacy International AT fixed.
16.5 proof research barrel 6.5 Creedmoor painted black threaded 3/4. Originally came with 308 that I sold but got this from a friend @TanktheFrank.
Thumbhole grip, should have the pistol grip with it as well.
Harris Bipod and vortex Venom 5-25.
Probably 200 rounds through the barrel and 300 rounds total through the action.
$4500 for everything shipped.
$4000 for AT only.

Lone peak Fuzion action with 26” Preferred Barrels 25 creedmoor 1.25” straight. Has 900-1000 rounds on it.
BA $1500 shipped
Action $1100 shipped. Your FFL must accept shipping from myself.
DM for pics.

Video seems to take some hard shots at some big name SEALs.

Is this old. Have I lead a sheltered life?

Login to view embedded media

Which action manufacturer that sells AW cut actions, says or even guarantees, that their AW cut action will feed reliably in a particular AI chassis with an AI AW, AX, or AT-X magazine?

Any?

Login to view embedded media
I'd love to hear why this isn't criminal, for every one of the cocksucking bastards present.

For sale:

Giraud trimmer. Excellent condition. Has trimmed less than 1,000 rounds between two calibers. Also has the Primal Rights vacuum attachment so brass chips have been kept out of it. It will be included, as well as wrenches, original clear shield, and pilots & cutters for the following calibers:

.223 Rem.
6.5 Creedmoor
6mm GT

$475 shipped SOLD

I accept discreet PayPal or Venmo (F&F ONLY)

I'm looking pretty closely at the Maven B.5 line as I get a 20% discount. I've read a ton of threads trying to figure out which magnification level would be best, but I haven't really come to a conclusion. My main use would be on a tripod for PRS matches. What are your opinions on magnification for this use case?

I’ve got a extra scope laying around collecting dust

2800$ shipped firm

Partial trades for a manners, LRH or a Leopold Mark 5 moa

Did you ever wanna say something, but didn't because it was in a technical sub forum?

Zermatt Arms is pleased to announce the newest addition to our product line, the Matterhorn rifle chassis!

The MatterhornTM is Zermatt Arms’ vision of a modern-day rifle chassis mixed with elements of a traditional rifle stock. It features an all-aluminum frame dampened with a high-density phenolic material that absorbs unwanted vibration while providing the timeless look and elegance that only high-quality hardwoods can provide. The MatterhornTM also offers a tremendous amount of adjustability to suit the needs of a wide variety of shooters using products with the Remington 700 footprint.

The MatterhornTM will be available for purchase HERE Wednesday, May 22nd for $2150 in a short action, Remington 700 inlet. It will be offered for both right- and left-handed shooters and carries the following features:

• Full length Arca fore end
• M-LOK accessory rails
• Adjustable magazine catch
• QD cups on fore end and buttstock
• Vertical and swept grip options
• (4) sizes of grip base plates (swept grips only, vertical grip uses flush base plate)
• Adjustable length of pull
• Height adjustable cheek comb
• Laterally adjustable cheek comb
• 100% captive action screws
• All stainless-steel fasteners (with exception of action screws, nitride carbon steel)
• Troughs around action screws and a recoil lug dam for bedding compound

Full specifications are listed below:

• Base chassis: 6061 Aluminum
• Anodized chassis base (grey and black options)
• Wooden composite fore end dampening panels, cheek piece, grips and accents (options for colors available)
• Base weight: 6.75 lbs
• Fully kitted (maximum possible) weight: 12.25 lbs
• Additional weight options:
• Fore end: up to 22 ounces in 2.8 ounce increments (fasteners included)
• Butt stock: 28 ounces (fasteners included)
• External: 3 options available
• Standard: 4.05 ounces each (fasteners included), up to 8 per chassis. Best paired with two small external weights OR one flush cup external weight and one small exterior weight OR two flush cup external weights.
• Small: 2.66 ounces each (fasteners included), up to 14 per chassis
• Flush cup: 2.75 ounces each (fasteners included), 1 or 2 pcs per chassis, same size as “small” external weight
• External combination weight:
• 8 standard and 2 small: 37.7 ounces (2.4 pounds)
• 8 standard and 2 flush cup: 37.9 ounces (2.4 pounds)
• 8 standard, 1 small and 1 flush cup: 37.8 ounces (2.4 pounds)
• 14 small: 37.2 ounces (2.3 pounds)
• Fore end width (without weights): 2.345”
• Overall length (as sold with two LOP spacers): 34.750”
• Minimum LOP: 13.25” – 13.375” (dependent on trigger shoe)
• Length of pull spacers available in ¼” increments
• Fore end length (from end of chassis to back of recoil lug): 14.125”
• Maximum barrel diameter: 1.250”
• Fore end depth from centerline: 1.500”

As previously mentioned, the MatterhornTM will be available for purchase HERE on Wednesday, May 22nd for $2150. We have a limited number of complete chassis ready to ship and will begin that process the week after Memorial Day.

www.zermattarms.com

What tool are you guys using to install your scope rings & bases . Need to get inch pound tool .

Gents,
Recently picked this up, advertised as a tremor 3 reticle but after shelving it for a month I mounted it yesterday to find its an H59…. So, up for sale is a like new once mounted NF Atacr 4-16x42 with H59 reticle. I would really like to trade straight across for another optic with a tremor 3 reticle of equal or greater value. Hit me up with what you got. Or I will let it go to a good home for 2,500. Scope only no accessories in the picture are included.
Thanks guys.

This bastard ought to be lashed with a Cat o' nine tails, castrated and fed to sharks.


That photo alone is pushing the boundries and makes my stomach turn

This is the best the Democrats have to offer and someone those demonic, sick fucks look up to.

I know, I agree, asgh.

Getting out of 6gt.
$300: PVA Rock Creek prefit, 7tw, mtu, 26inch. Bergara / kauger threads. 500 rounds fired. Barrel nut included.
$125: Match master die set

*Package deal, $350. Hornady brass included.

I'd like to keep the brass with barrel, or as a set. Barrel must go before dies, if separated.

As the title says, guess my latest project. 3" barrel, .38 special caliber. Block of aluminum is 3x2x1 inches.

I have 5 new/unopened 10 round Bergara B-14R .22LR magazines. (I bought them for the B-14R I was about to order, then my wife said I'd be happier with a Vudoo V-22. Who am *I* to argue?)
Will not separate.
$125, shipped. Continental USA only. Zelle or PayPal for payment.
(This is my first "for sale" post. If I have done anything wrong, please advise. I'm not a rebel, but I do make mistakes...)

Great little 6 Creed ready for a home. See more below and for pricing

https://straightjacketarmory.com/product/6-creedmoor-custom-in-stock/

Looking for STI_1911_Guy. Need to get another ball head kit from him, but he hasn't returned my PM's. If anyone know how to get a hold of him, please PM me. Thanks a bunch.

I'm a cnc Machine programmer / operator with 12 years experience with a background in medical devices and prototyping , use solid works daily too . any one know a decent shop that is looking to hire in the DFW area ? using indeed and what not but if any one maybe has an in with a good shop I would appreciate the lead