Need advise on what to do. I’m currently loading for 22BR and I am getting marks on my bullets while seating. I’m using a Forster micrometer seater with necked down Peterson 6BR brass then expanding mandrel to give 2thous neck tension. It’s not a compressed load.

New & unfired, never had a barrel on it.
Right hand
AW/AICS cut
Short action
308

$1350 shipped Zelle/Applepay/Check

Complete 40-X short action, new never barreled.
.480 bolt face
Badger 20 moa rail
40-X trigger
Stainless receiver chrome-moly bolt.
Steel bdl guard assembly
850$ shipped to lower 48

Hey guys,

I have a competition that I'm flying to in Utah Labor Day weekend with an non-profit called Torn Warriors. I've been looking everywhere online and locally, and besides sketchy websites, I can't find large rifle primers anywhere. Particularly, I'm looking for CCI #200 or #250, preferably the #250, but beggars can't be choosers. If you guys have a lead on where I might be able to find some, please let me know. I need a minimum of 400, but a 1,000 count brick would work. I need 200 for the match and I sill need to do load dev., so the more the better. Honestly, I would settle for other than CCI primers, I'm kind of desperate. Again, any help would be greatly appreciated.

Thanks for the help ahead of time. I really appreciate it.

Yup, someone put him there. But like a certain Austrian corporal, he has also probably lit out on his own.

You wonder how things work in the executive branch? Well, there isn’t one. There is a shadow government being run by an ex president.

Of course, we have been saying this since early 2017 when it was apparent that there was, indeed, a deep state. And it is being run by a guy who wants to destroy America.

Surprise.

Sirhr

For sale I have Lapua 6 creedmoor brass. SRP brass.

203 1x fired and 110 2x fired brass. Bolt gun only. Brass has been dry tumbled only but unprocessed otherwise. 1x fired has been deprimed.

Asking $150 shipped. PayPal FF, Venmo, Zelle. Long shot but I would trade toward a 9mm pistol like an sig p365 or hellcat. No Glocks. And I plan on buying a beretta cx storm carbine, so I’d love to trade towards one of those. Cash added on my end.

My oldest boy who is 9 joined the 4H shooting club this year. He did archery and .22. Today was the fair shoot and he won both archery, in a shoot off, and .22 in the Jr division, pretty exciting. He's been shooting a .22 since he was 4 or 5 and killed a deer in TX at age 7 so he's off to a good start

Well since he's going to continue in the 4H shooting I want him to have his own rifle. Looking for opinions on what rifle to get him. He used a club gun this year, a savage, because all ours are semi autos. Has to be a bolt gun, single shot or up to 5rd mag. Open iron sights, he did not like the target sights on the rugers.

I'm thinking a CZ 457 scout. Or an Anschutz but they are pretty spendy. What do you suggest?

Thanks

Like new . $35 shipped paypal friend or Venmo

I have been thinking for some time about building a 7mm rifle for long range. Looked at the SAUM, PRC and others. Problem is large primers. Neck up a 6.5 PRC, same problem. Prefer short action, but will go long. How can I push a heavy 7mm with a small primer pocket?

Lightly used Aero Precision Solus 17” Competition chassis 700 SA RH. Comes with the optional nightvision Bridge, 2 sets of Grey Ops long external M-lok weights, and MDT Elite Vertical Grip installed.
$800 for everything shipped OBO
$700 for chassis without weights.

Two lots matched 500 rnd bricks. $330 shipped for both.

The world of bipods is changing!!!

I have a ton of respect for harris, but I kinda have to giggle that this wasn’t done 10 years sooner….

Yep, you read that correctly. A person was suspended indefinitely from their job, their only means of livelihood, for the apparently despicable act of "liking" a meme of George Floyd on social media.

He didn't create the meme. He didn't distribute the meme. He merely hit the "like" button on somebody else's post. And now, he is facing serious professional repercussions.

This is where "woke" culture and leadership has gotten us.

Jimmie Johnson is co-owner of the team, I didn't realize he was such a pussy!

How do you guys dispose of the CLR and carbon mixture after you’re done cleaning your suppressor?

First off, I'm not trying to start a pissing match over this but genuinely curious if someone can point me in the right direction.

My AIAX is not grouping on par with my TL3.

I cannot shoot at a distance currently due to where I live as the crops are growing. I was bored and thought Id see how I shot for "groups" since I typically never shoot for groups.

The first rifle was my TL3

• 6.5 Creedmoor
  • Hornady 140 ELDM Factory
• Proof 24in
• area 419 hellfire
• AI ATX chassis
• Trigger Tech single stage

And I was thrilled, to say the least. The first shot to the bottom right of the nine was my fowling shot. The group above that is three, and the group to the bottom left is three...






Next, Enter the AI

AXSA

• 6.5 Creedmoor
  • Hornady 140 ELDM Factory (Actually used the rest of the box I started on the TL3)
• Area 419 Hellfire
• Factory WinTac Barrel

And this is what I got.


I shot more after this and couldn't get it squeezed down. I even swapped barrels to a different caliber with Copper Creek Ammo and couldn't shoot anything too impressive. Certainly not on Par with the TL3.

I have checked the usual culprits, scope rings, base, muzzle brake, and the retention screw for the QC barrel, but I got nothing.

On a side note, when I bought the AI (from one of the very popular AI distributors), I was told it was a brand-new rifle. And it looked new, with no marks from the brass ejecting. But it had a 16 prefix. When I asked about it my salesman said that doesn't matter its a 2023, the prefixes do not mean anything. I don't know if I got a lemon that was brand new technically but held back from 2016 for another reason?

- Vortex Razor Gen2 4.5-27x56 in mil. EBR-2C reticle. Has some small marks but is in great condition. Glass is perfect. Comes with sunshade, scope caps and a Switchview lever. $1300. SOLD

-Holosun 512 Red Dot. Good condition, great glass. $220. SOLD.

-Nightforce Ultralite Unimount. 34mm. 1.5” height, 0moa taper. $220.

-Atlas CAL Bipod (gen 2) with Area 419 Arcalock clamp. $250. SOLD.

All pricing includes shipping and insurance on me. I can do Zelle or Paypal F&F. I can also do Paypal G&S with extra fees on your end. Cross posted.

Looking to sell a like new, with box, Zermatt Origin short action and Zermatt action wrench. The action only ever had a barrel mounted to it. Never fired. Comes with two styles of bolt handles, and of course the recoil lug, too.

Looking for a fast sale to fund another project! Selling the entire lot for $820 shipped to your FFL. Payment via PayPal friends and family.

I have a full turnkey NRL22/PRS22 setup for sell. Life happens and need to thin the herd. Bergara B-14R steel barreled action with Crossroads Precision CPR shroud upgrade and trigger tech Diamond flat single stage trigger and a 30 MOA scope Mount. Sitting in a Aero Precision 17” Solus Competion chassis with the Optional nightvision bridge. Also has 2 sets of large Grey Ops external weights already installed for balance, and the grip was upgraded to a MDT Elite Vertical grip. Has an Atlas Bipod with a RRS ARCA Mount and 2 full bricks of SK rifle Match same lot and 3 factory Bergara mags, 2 have the MKM 3 round extension. Topped off with an Athlon Cronus Gen 2 UHD 4.5-29 APRS6 mil scope with MKM caps and throw lever sitting in a set of Steiner T series rings. I have the original boxes for nearly everything as pictured. Prefer to try to sell as a whole setup but will entertain offers. $3100 for everything listed. Prefer to do face to face, live in South Georgia. But will travel or ship to FFL. I also still have the original Bergara trigger in the Bergara box.

3k rounds of SK standard plus 22lr ammo
40 grain lead round nose
All ammo purchased new within last year
these are the lots & round count

Lot 24056/24722-1,750 rds
Lot 1455622873-750 rds
Lot 24056/24712-500 rds

$400 shipped conus.I will not ship to
Alaska,Illinois,New Jersey,California,
Washington DC,Hawaii
New York must ship to FFL

Items for sale

6mm .243 DTACs, have 2 separate lot numbers for the DTACs, all are coated and nose ring
$160 each box shipped
9, boxes SOLD 500 each 76198
8 boxes, 500 each 27646-SOLD

next I have Lapua brass
4, now 2 boxes, 100 each 338 Lapua BBR head stamp - $200 each box (reduced)
4 boxes, 100 each 223 rem.- $SOLD
2 boxes, 100 each 308 win.- $SOLD

1 box, Sierra .22 cal. 69gr BTHP 500 count - $115 (SOLD)

All will ship USPS flat rate, unless you pay extra for something else. Take Zelle, Venmo, and CC PM for details.

thanks

Jonathan Isaac is a Black, Conservative, Christian, NBA Player for the Orlando Magic, and he's launched an anti-woke clothing line called Unitus:




Login to view embedded media

So while the Wife was doing her weekly shopping she comes across some camo shorts in my size.
I told her good snag from the sale rack, now I'm ready for dove season.

She tells me if they made camo bug spray to put on my bright white legs I would be gtg.

Anyone know where I can get Krylon bug spray?

America is toast. Been coming for decades, but there is so much shit going on now. We’ve already lost and most don’t even know it. Still asleep...that is all. Good luck and Godspeed.

Just an FYI...

Vision made some updates to their chassis. These updates are backwards compatible. Unfortunately they haven't offered a midsection that removes the hump infront of the magazine well, but they have made some nice updates to the buttpad and cheek riser.

Also, new website launches earlier this week and they are offering a sale on parts and accessories.

I didn't see this discussed and thought some vision owners might be interested in some of the updates, especially at a reduced price.