WTS: 1995 Knights Manufacturing Co. SR-25 "Match" Stoner 24" 7.62x51 .308 All original.
SN 24374. I'm the original owner and purchased rifle new on 3-23-1996.
U N F I R E D by me. Never purchased a mount or optic for the rifle, never made it to the range.
SR-25 became another "Safe Queen Rifle" back of the safe it went.
Kept in Mint condition, .308 snake clean, property lubricated, muzzle cap, dust free safe.
Mint bore and rifling, rifle in Excellent Mint U N F I R E D condition.
SR-25 comes with (1) 20rd magazine.
Manufactured in 1995 and includes the test target and the 59 page original owner's manual.
KMC 100 Yard Target test done on 1-12-1995.
Included, several publications articles about the KMC SR-25.
No factory case, will ship in a hard case, but it's not a KMC case.

Caliber 7.62X51MM NATO
Finish BLACK SYNTH STOCK/BLACK
Capacity 20 ROUNDS
Weight 10.75 POUNDS UNLOADED
Action SEMI AUTOMATICSR 25 RIFE FOR SALE
Barrel Length 24'' BARREL

Shipping FFL to FFL Ground $125.00
Will NOT ship to states where prohibited by law. Check your local and state laws.
No international shipments.

Payment Method USPS Money Order, Money Order, Certified Check

Price $6600 OBO
Any questions or additional pictures...LMK
Looking for a fast sell if possible (NFL Fantasy Football here soon, need extra money...LOL Go Cowboys !!!)

Sure rings true!

In like new condition. I have the extra weights it came with. Rem 700 short action footprint
$1,200 shipped no trades

Going to sell my PRS rifle got a job I won’t have much free time at.

Zco 5-27 Mpct3 with sphur rings an scope chaps SOLD

Foundation centurion with full length arca and full weight kit $1200

Impact 737/proof 26” 6cm/bix n Andy tac sport pro/ apa gen 2 little bastard $2000 SOLD

Cyke pod single pull $500 sold

2 .308 AI mags $120sold

Fix it sticks SOLD

ALL TOGETHER $6200 will update picture with foundation not the falkor chassis

The opinions and conclusions I share are 100% biased and subjective to my experiences. Now that that disclaimer is out of the way, let’s get started.



A few years ago, I committed to a competition called Assassins Way, a month-long field competition that is designed to test a variety of field craft, rifle craft, and other skills a well-rounded shooter should know. The gear requirements however are such that you have to carry your load for the entire month through multiple states and biomes. No swapping out gear, replacing items, etc. Knowing the demands of being out in the field for a long time, I gave myself a year to test equipment, techniques. I wanted to learn the stuff that I didn’t have a good grasp on in order to leverage myself toward a top finish. 



Weight is Stability but...

Click to expand...

Continue reading...

Been consolidating around the gun shop and found some random things I have never used or barely use anymore. Selling as a whole. No trades $500 shipped.

Magne to speed sporter model
Giessele 762 react rod
4- hk 556 mags brand new
Eotech 512 laser baterry hood
2 German pmags
1 hk g3 mag send it level
30 mm Adm scope mount not sure what the height is
Kac flash hider 762
Rugged surge 762 brake
Harris bipod W rrs arca adapter
2 hk battle grips
Lwrc combat bolt 556
Unknown bolt 556
Vortex 3x magnifier for optics

Previously bought a 28" 1-9 to shoot 162gr eld with Alpha brass and Shooters World Long rifle.
Who's all shooting 7mm 08 ? Im seeing very goodluck with WTO SAW II and the 162gr eld.

Guys..... This has been beaten to death but you have to watch how your using abrasive cleaners! Here is a 223 barrel with 800 rounds on it. Cleaned after every 75 rounds fired. I know the pitting is from a chemical reaction but I didn't get the whole story. It was cleaned approximately 10-12 times from what the shooter told us.

What I did get was the shooter was using ThorroClean. This is a cleaner made and mixed with Iosso Bore Paste! So sum it up how ever you want.... it's an abrasive cleaner. The lands and bore are completely damaged. The lands are all rounded over, damage to the muzzles crown as well as polished and rounded over. In the first 2" of the barrel from the chamber a brush with the cleaner was run either by hand or with a drill on it. You can see the drag marks going over the tops of the lands and down in the grooves. This isn't from when the barrel got made. My guess is the shooter was worried about the carbon ring build up in the throat. Also notice the gouges running down the bore on tops of the lands and grooves.

Watch what your doing please.

The last picture for a reference for comparison is also a 223 Remington barrel. This was a accuracy test barrel I got back from the bullet maker. It quite shooting at 14,000 rounds! Up to that point it held .5moa or better at 200 yards. This is a saami spec. 6 groove barrel (not 5R rifling). Only one guy in the ballistic lab is allowed to clean the barrel with JB bore compound when they start getting a carbon ring built up. They only use the JB when the need is felt to use it. For an approximate number of cleanings on the accuracy test barrel it got cleaned 140 to 200 times.

Later, Frank
Bartlein Barrels









here is the accuracy test barrel with 14k on it....

Here is the excuse to burn down cities and loot electronics stores.

24x7 MSM surround sound coverage.

Don’t look at Biden Crime Family or US troops moving into the ME.

Dumbasses went all 1943 Alabama shipyard klukker riots and it’s going to be another excuse for racial unrest. Just like they want.

Idiots.

Sirhr

Selling my Bushnell Elite Tac LRTS 4.5-18x44 in FDE with the G3 reticle. Bought this about a year ago on the Hide and just replaced it with a DMRii Pro.

Scope is in great condition other than the small rash on the windage turret. Asking $775 shipped CONUS - includes the Seekins Precision rings and everything shown in the pictures.

Have a multi camo lodrag I don’t use 220 shipped will get pictures tomo

Unopened sleeve of 500, $220 shipped, paypal ff or money order, thanks.

Black Hills 5.56mm 77 Grain Tipped MatchKing Accuracy Evaluation Update








In 2016 I posted an in-depth review of the Black Hills 5.56 77 grain Tipped MatchKing ammunition. Three 10-shot groups of that 2016 lot had an average extreme spread of 1.26”. The smallest of those groups had an extreme spread of 1.14” with a mean radius of 0.39”.







The cartridge overall length for the 2016 lot of the Black Hills 77 grain Tipped MatchKing averaged 2.246”, while a 2023 lot averaged 2.243”. The length of the bullet itself is basically the same for both lots. The 2016 lot was loaded in Winchester brass and the 2023 lot is loaded in Lake City brass with stab primer crimps. Both lots have sealant in the primer pockets and neither lot has sealant at the case mouth.







In my 2016 review, I noted that the 77 grain Tipped MatchKing was one of the longest bullets being commercially loaded to magazine length in the 5.56mm cartridge and that it had such a long ogive that the cannelure extended past the bearing surface of the bullet and onto the ogive, giving the grooves of the cannelure a rather unique “arrowhead” appearance.

















The base to ogive measurement of the bullets in the 2023 lot is approximately 0.017” longer than the 2016 lot and the configuration of the bullet at the junction of the bearing surface and the ogive now allows for a full-fledged cannelure that does not appear to extend into the ogive, or it was just a matter of pressing the cannelure deeper that makes it appear so.







A 10-shot group of the 2023 lot of the Black Hills 5.56mm 77 grain Tipped MatchKing ammunition fired from the same Lothar Walther barreled AR-15 used to test the 2016 lot, fired under the same conditions from a distance of 100 yards had an extreme spread of 0.86” and a mean radius of 0.24”.








I’ll be posting chronograph data for the 2023 lot in the near future.

10/27/23

I chronographed two different lots of the 2023 Black Hills 5.56mm 77 grain Tipped MatchKing ammunition from an AR-15 with a chrome-lined, NATO chambered, 20” Colt barrel with a 1:7” twist.

The muzzle velocity that I obtained from the 2016 lot of this ammunition is shown in the table below. Black Hills now advertises that this load has a velocity of 2750 FPS from a 20” test barrel.

Chronographing was conducted using an Oehler 35-P chronograph with “proof screen” technology. The Oehler 35P chronograph is actually two chronographs in one package that takes two separate chronograph readings for each shot (primary velocity and proof velocity) and then compares those readings to a statistical table to determine if there is any significant difference between the two readings to determine if the primary velocity is a valid reading or likely to be an erroneous reading. If there is an erroneous reading, the chronograph “flags” the shot to let you know that shot is invalid. There were no invalid shots flagged during this testing.


The velocity stated below is the muzzle velocity as calculated from the instrumental velocity using Oehler’s Ballistic Explorer software program. The string of fire consisted of 10 rounds over the chronograph.










Each round was single-loaded and cycled into the chamber from a magazine fitted with a single-load follower. The bolt locked-back after each shot allowing the chamber to cool in between each shot. This technique was used to mitigate the possible influence of “chamber-soak” on velocity data. Each new shot was fired in a consistent manner after hitting the bolt release. Atmospheric conditions were monitored and recorded using a Kestrel 4000 Pocket Weather Tracker.







Atmospheric conditions

Temperature: 71 degrees F
Humidity: 42.5%
Barometric pressure: 30.05 inches of Hg
Elevation: 950 feet above sea level


The muzzle velocity for lot #703 was 2779 FPS with a standard deviation of 16 FPS. This lot had a coefficient of variation of 0.58%.

The muzzle velocity for lot #723 was 2762 FPS with a standard deviation of 21 FPS and a coefficient of variation of 0.76%.


For those of you who might not be familiar with the coefficient of variation (CV), it is the standard deviation, divided by the mean (average) muzzle velocity and then multiplied by 100 and expressed as a percentage. It allows for the comparison of the uniformity of velocity between with different muzzle velocities.

For comparison, the mil-spec for M193 allows for a coefficient of variation of approximately 1.2%, while one of my best 77 grain OTM hand-loads, with a muzzle velocity of 2639 PFS and a standard deviation of 4 FPS, has a coefficient of variation of 0.15%.

….

Been perusing the threads. Didn’t find what I’m looking for. Please point me in the right direction if I missed it:

6GT Alpha Munitions OCD brass. SAMMI recommend trim length for 6GT is 1.7250. In past attempts to trim with my Lyman, and admittedly having little experience trimming, I have a few at the recommended length, but others are at 1.760, 65 and 80.

On the short side, I have some from 1.7220 to 1.7245.

Is there an acceptable range, or should I try and be spot on? How might consistency possibly be affected being dead on vs. within the possible range?

Barrel is a Proof pre-fit Competition Contour.

Thanks for any input.

Selling my short action Zeus with a .308 bolt face. Also have a spare magnum bolt for sale for $500.

Action has a few hundred. rounds on it. All match grade factory .308 ammo.

Terminus Zeus SA w/ .308 bolt: $1450
Unused Magnum bolt: $500
18” Bartlein .308 barrel done by Southern Precision Rifles. $600.
Only trade I am interested in is a LA Zeus. Please no other offers. Prices are firm unless buying multiple items. I probably won’t answer a lowball offer.

Barrel does not come with Brake or thread protector unless you want to purchase them.

Only trades I’d consider are a LA Zeus. Willing to entertain reasonable offers, especially if getting more than one item.

Don't want to but I'm gonna let it go.
RR serial number
In excellent condition.
Shoots bug holes with Norma match.
What you see is what you get.
Not pictured but I have the flash hider.
$6000obo includes shipping.
Located in Montana. Hit me up with questions and offers.

I have both a 2.5-20x and a 4-32x NX8 for sale. Both mil xt reticle.

Both have all original accessories, but 4-32x doesn’t have original box. So don’t be surprised when that arrives in a vortex box instead.

I also have a MPA BA Mount that id throw in for an extra $150 OBO. It’s 1.125” high. - SOLD

4-32x is $1650 shipped and insured. - SOLD

2.5-20x is $1600 shipped and insured. - SOLD

Prices are PayPal F&F, Venmo or Zelle.

Only trade I'm looking for is another Razor LHT 4.5-22x Mrad+cash

I saw powder valley has 106gr tipped bullets on sale. Was told they are 106gr Atips and they're factory seconds because the firsts are for DOD 6 ARC contracts at the moment. Anyone tried these and have any results they could share?

I just learned in my Oklahoma CCW class that its illegal to carry a pistol on USPS property , a definite felony:

The problem:

Youre in the P O with your concealed carry, well concealed, got your mail and headed out when you hear gunshots around the corner.

-Do you risk your freedom by stopping the mayhem.

-Get the fuck out of there cause even in you stop the problem you create a huge one for yourself.

Sheridan, WY – Aug 2nd. Weatherby will introduce the newest member of the Orion ® shotgun family, the Orion SxS (Side-by-Side). The Orion SxS is the perfect companion for your next bird hunt or clay shoot. The straight English stock, splinter forend, and double triggers bring a classic but functional look to the Orion family. A swamp rib with a brass bead ensures a clear sight picture for quick and accurate wing shooting. The Orion SxS comes equipped with 5 extended chokes (SK, IC, Mod, IM, Full) and the barrel was designed to handle modern steel shot loads. Made for conscious bird hunters, the side by side features extractors to make sure empty shells end up in your pocket and not on the landscape. Starting at just 6.7lbs, this is a shotgun you can carry all day long and is available in 12 and 20 ga. Check your local Weatherby dealer in the month August for availability.















MSRP:$1,099

Mechanical Double Trigger

Reliable mechanical double trigger. The front trigger fires the right barrel, and the rear trigger fires the left barrel.

Ambidextrous Tang Safety

The tang safety is ergonomically placed for quick transitions from the safe position to the fire position.

Swamp Rib

A classic swamp rib is used to aid the shooter in keeping their face on the stock and encourages the shooter to focus on the target.

Straight English Stock with Splinter Forend

A classic straight English stock with a slim splinter forend allows for natural pointing and an easy transition between the two triggers.

Extended Chokes Tubes

Comes with 5 extended choke tubes (SK, IC, Mod, IM, Full) and utilizes the Yildiz choke system.

Long Tang Trigger Guard:

The long tang trigger guard adds strength and additional stability to the wrist of the stock.



Learn More at www.weatherby.com

Almost new Triggertech Diamond single stage flat shoe trigger for Rem 700’s (no bolt release). Perfect condition, mounted once on backup but never fired. Included wrench, patch, instructions and original box.

Not looking for trades - $SOLD shipped to CONUS – PayPal Friends & Family only.

Almost brand new! Leupold Mark5HD, 5-25x56 scope with PR-2 mil reticle. Was a backup scope and only to range once to zero. Has a small mark left side near elevation turret that was there when bought new in June.

Also comes with Leupold Competition Speed Dial and a set of three white ballistic turret tapes that you can write on with dry or wet erase markers. Includes all scope caps, sun shade, Allen wrench, decal, instructions and original box.

Not looking for trades - $SOLD shipped to CONUS – PayPal Friends & Family only.

Looks like those slimy subhuman degenerate fucks with Everytown are trying to get red flag laws passed in Tennessee.

Think they will succeed?