removed going to auction

After investing billions to adhere to President Joe Biden’s green energy agenda, General Motors (GM) is backtracking on all fronts when it comes to Electric Vehicles (EVs).


As GM was the last of the Big Three to strike a tentative agreement with the United Auto Workers (UAW), the automaker’s green energy dreams — championed by the Biden administration — have come crumbling down.


GM CEO Mary Barra, a close ally of Biden’s, has said the automaker will not begin to attempt to produce 400,000 EVs from 2022 through mid-2024 as initially planned. GM is also delaying retooling its plant in Orion Township, Michigan, to build EV pickup trucks.


Days ago, GM had to begin offering owners of its Chevy Bolt about $1,400 to install a diagnostic program to determine if the vehicle’s EV battery is defective. The move came after GM had to recall all of its Chevy Bolts due to the EV battery issues and a class action settlement over the battery problems is anticipated in the near future.


In addition, GM executives are having to delay launching a number of their EV models such as the Chevrolet Equinox EV, the Chevrolet Silverado EV RST, and the GMC Sierra EV Denali.


Those launch delays have coincided with GM and Honda ending their billion-dollar joint venture to produce affordable EVs for Americans as well as markets in South America and China.

The end of that joint venture comes as demand for EVs among Americans has plummeted with the all-electric cars staying on dealership lots for an average of 65 days — way up from last year’s average of about 21 days.


“The American public is not ready for the broad adoption of electric vehicles. There are maybe 10 percent to 12 percent of people who really want an electric vehicle … the remainder still want internal combustion,” former GM executive Bob Lutz said this week.


Aside from potential customers, auto workers at GM have largely been turned off EVs and Biden’s green energy agenda that seeks to foist them on the American public. As part of its deal with GM, the UAW made sure to bring the automaker’s EV plants into its tentative contract so that workers will score higher wages than currently.


GM executives had hoped to keep auto workers at its EV plants out of such contracts. Also significant is the deal’s strike provision which gives GM’s employees the right to strike whenever the automaker closes one of its plants.


While GM stumbles, China is ready to flood the U.S. market with cheap EVs.


Breitbart News Senior Editor-at-Large Rebecca Mansour has long warned that without major investment in domestic manufacturing and auto workers, steep tariffs, and time for American automakers to adjust, China will dominate the EV industry.


“A Biden-led administration’s rapid push towards an all-electric future would rob U.S. auto workers of the advantage of experience and U.S. auto plants of the advantage of previously built manufacturing capacity,” Mansour wrote in October 2020. “… rushed and without tariffs, most of this will likely end up in China — just like all the rest of American manufacturing thanks to decades of failed trade policies like Joe Biden’s.”


China already has a major advantage over the U.S. in that it controls much of the EV lithium-ion battery supply chain including minerals such as nickel, graphite, lithium, and cobalt.

NOT HER MONEY! FOOLISH INVESTORS MONEY!

Mcs with clutch , has weights

$1650 shipped

This is a little outside the Hide's bailiwick, but we were offered an opportunity buy on these. We have in stock the Garmin Xero S1 Trapshooting Trainer, normally $999.99, available on our site for $499.99. As always, free shipping on all orders over $100.

Fuck 6% commissions!

As the title says I'm starting to research to find a scope that is a better fit for me than what's currently on my rifle (Vortex Diamondback tactical FFP).

• What is the platform for the scope? Ruger American Go Wild in 6.5C. Plan on something better in a couple of years and possibly a different caliber, .30-06, .300 win mag, or something else
• What cartridge are you shooting? 6.5 creedmoor
• What is your intended use for the scope? Whitetail deer, coyotes, ground hogs, etc.
• What type of conditions will you typically shoot in? Both daylight and low light situations.
• What are the typical distances you intend to shoot? typically between 50 to 250 yards. Have options for up to 400 yards, but would only consider that on a ground hog or coyote.
• Are there any specific specifications you would like? MOA reticle
• What is the price range you can afford? $900 to about $1300

As many can imagine the limiting factor me with my current scope is Chinese glass. It just doesn't work well in the last 20 minutes of shooting light. Currently I've been looking at the following:

Vortex Razor HD LHT

Bushnell Elite Tactical

Athlon Cronus

Trijicon Credo HX

Vortex Viper PST Gen2

Leupold VX-5HD

Primary Arms GLX Series

I’m still sorting out what I think some of my needs are. At the moment I would like to have a minimum maginification of 4x and possibly a max around 20x with a 50mm objective. I don’t think I will be dialing shots at different ranges so I would prefer to have a reticle setup with holdovers in MOA. I could go either way on FFP or SFP, but would probably lean more towards FFP. I’m not sure that I need locking turrets or zero stops or other features like that.

Based on some other threads that I’ve read I’m open to buying a better quality scope that’s used and in my budget vs a lower quality new one. I’ve been keeping an eye out in PX but I’m out of my element and knowledge in what brands and models to look for. So in I’m looking for real world experiences the scopes on my current short list and opinions on what should be on that list as well.

LR

Great LPVO just not shooting gas gun much anymore, glass is perfect will ship in original box and mount is 34mm tube, 1.5" height and 0 MOA (PN 05-405)

Scope alone: $$$SOLD
Mount alone: $225.00 shipped

For sale is brand new Vudoo V22 Three60. This was sent to Jonathan at Modacam and barreled with a Shilen Select Match barrel and finished at 25”. I just got this back from Jonathan last week but due to finances, I have to sell. It has not been shot once except the testing that Jonathan did. He sent me pics of his test groups (see picture, left is Midas and right is Tenex Match). it’s a shooter.

I would like to sell the complete rifle but am willing to part it out if I can get a buyer on the chassis and bipod. I’m going to sell the scope and mount in a separate listing. If you’d like the scope with it, add $1750

Specs are as follows:

Brand new Vudoo V22 Three60 w/ 30moa base
Triggertech Diamond Single Stage flat face
Shilen Select Match (16twist, ratchet, #7 Heavy Varmint. Same barrel as Womfat)
MDT ACC Elite Chassis in black w/ dampeners
MDT Ckye Pod (gen2, standard single pull)
Zeiss LRP S3 6-36x56 (ZF-MRi ret)
Audere Adversus Gen2 scope Mount
1 Factory Vudoo Mag
2 L3i gen 2 ultimate mags
Vudoo Bolt Assembly Tool
5 boxes Eley Tenex (different lots)
5 boxes Eley Match(different lots)
5 boxes Eley Team (different lots)


All items are brand new. I have all the original boxes and paperwork for all items. Also, have all original receipts and invoices.


If sold separately the prices would be as follows:

Barreled action (including the trigger and one factory Vudoo Mag) - $1975
Chassis (including dampeners) - $1375
Bipod- $500
Scope (including Audere mount) - $1900

Mile High Shooting Complete Rifle Build
Asking $7500.00 FIRM
Please only serious inquiries
Garland marked

Selling some of my night vision gear and other goodies, all prices are obo

1) L3 gen 3 Unfilmed WP pvs14 <150 hours
2633 photocathode response
36.1 SNR
72 lp/mm
1.9 ebi
.7 halo
SALE ON HOLD UNTIL I GET NEW HOUSING (cracked illuminator lens)

2) team Wendy exfil bump m/l $SOLD
3) Wilcox l4 g24 mount $SOLD
4) rqe universal bridge in fde $SOLD
5)rqe obverse shoe set oss $SOLD
6) kvc jamr $SOLD

7) peltor comtac 3 with PTT and radio $450

8) kestrel 5700 sportsman with AB and link and linkable Bushnell Elite 1 Mile rangefinder
$300

9) aimpoint t2 with unity mount $775

10) Steiner mini tor IR laser $150

I put this together for my nephew who has no interest in precision shooting. It’s a 700 action, timed and soldered bolt handle, with 20” 6.5cm Proof carbon barrel and 18” 6cm Bartlein. Both are threaded 5/8-24 and both were smithed by Adam Bentley. Less than 500 rounds. Seekins Precision 20moa rail, Timney HIT trigger, KRG Bravo stock with aluminum ARCA forend and aluminum LOP spacers. Atlas CAL bipod with RRS ARCA mount, Bushnell XRS2 with illuminated G3 reticle mounted in a NF magmount.

$3000 shipped

Every country on earth refuses to let these scum into their country. I do not doubt for an instant that FJB will truck in a few hundred thousand of these leeches into America. This is a typical result without a doubt.

Login to view embedded media

I've learned alot of these lessons over the years the hard way. A good list to review now and then.

Login to view embedded media

GA Precision Complete Build
Asking $15,000.00 FIRM
Please only serious inquiries

When choosing an ammo for competition (not practice), what would you focus more on? I tend to lean more towards ES over 100 shots, mostly because in a standard COF at an X match or PRS match your going to shoot 100-110 rounds. If my SD is low but my ES is what i would call high I'm assuming there are going to be a couple rounds out of that 100 that are going to be way off target. I could be wrong but just my thinking.

Thoughts?

Looking to sell, sorry no trades.

Hornady 106gr A-tips (6mm)
These are FACTORY SECONDS
1100 total(11-100ct boxes.)

Picked these up from Powder Valley last month or so to get by till my backorder shipment came in of my regular projectiles......the order came in so I won't end up needing these.

$450 shipped for all 1100.

Pp, venmo or pmo accepted for payment ( if using pp please add the fees or pay ff)

I would entertain selling in 2-500ct lots but prefer to sell as a single lot.

I have a few of Tab Gear's suppressor covers. Some of them started to fall apart. I've been trying to get a hold of them starting over a year ago for some warranty support

Anyone else had the quality issue and/or struggled to reach anyone at their office for support?

Time for another purge! Bought or traded for a lot of this stuff. Extras for future builds. Leftovers from previous builds. PayPal f&f is my preferred payment. If we’ve done business,or you’re an old school member other forms of payment can be discussed. Not really looking for trades. With the exception of the diamond rings……..

Shipping is not included unless we work something out via pm.

Here we go!

#1 is a brand new arken rigid 20moa 30mm cantilever mount. Only removed from box for photos. SOLD

#2 is a brand new set of millet tactical 30mm medium height rings SOLD

#3 Rhineland arms scorpion stock for a savage mark ii. Comes as in photos with cheap bipod forward grip and a new dip products tactical trigger guard. Sold!

4 is a used black magpul prs for an ar-15. NOT A GEN III. SOLD!

5 2 egw std long action bases for Winchester rifles.the hd version is a 30moa can’t and comes with action screws. The other is a 20 moa and has no screws. 30.00 for both of them

6 used savage bolt handle. Came off a model 10 10.00

7 steel adl trigger guard. Comes with screw. SOLD

8 new warne vapor 30mm low height rings SOLD

9 old timer (shrade) Bowie knife. Never been out of the house. 60.00

10 arken sh4 gen II 6-24x50 moa a few nicks in the paint on the turrets,has ring marks. And has a scrape from an incident in my safe. It works just fine! It’ll come with the throw lever and caps. And I also have a new battery for it. I have the box and sunshade also. SOLD

11 free set of medium height 1” scope rings. Believe they are monstrum? I’ll toss em in free if ya buy something else… GONE

Lastly big #12…… another build that didn’t come together!!! I’ve got two diamond rings that where purchased from riddles jewelry here in Nebraska. Yes they are real! And yes I will get all the pertinent info for a prospective buyer/trader. Ie karat weights etc. Now….. what I am looking to do. I’d trade all of them for a decent scope. Let’s say something like a meoota optika6 in either the 4.5-27 or 5-30 power range. Or a nightforce nxs. May possibly look at others,who knows? Or would possibly trade for firearms. Mostly looking for a savage 338 lapua, a bergara b-14 hmr in either 22-250,300wm or 17hmr. Might look at aics chassis also for either short or long actions. If you think you may have something else to trade? Pm me. Never know? Pawn shops ain’t gonna give me shit for them!

Please post your xero accessory recommendations here.
Save me and others from having to read through 1k plus posts to find what works.
Hard cases,
Soft cases,
Tripods,
Rail mounts
etc.

Hurricane Otis hit Acapulco with cat 5 force and had basically devastated the place.

Not a word about it except on Breitbart.

Somehow must not hit a narrative?

The video is unreal… miles of coastline hotels just destroyed. Looting and lots more deaths than Mexico is reporting…

I saw a fly-by down the beach (can’t find video) and every hotel looks like a bomb bust hit it.

Anyhoo… not good down there!!

Sirhr

Used right handed MDT ACC Elite in black for short action 700’s
Comes with 3 sets external weights
Full internal weight kit
2 round holder
Rubber dampeners
Chassis shows some wear marks from use that you can see in pictures but is in overall good condition.
$1,375 shipped
No trades

Accuracy International of North America, Inc., has been selected to supply the Modular Precision Weapon
Platform (MPWP).

This was in response to a solicitation from U.S. Customs and Border Protection (CBP)

The MPWP is a multi-caliber, bolt action AT-X with a short forend, folding stock, AI trigger, and other
accessories.

This is a single-award, Indefinite Delivery/Indefinite Quantity (IDIQ) contract.

I have a bunch of stuff that is just collecting dust around the house. Not sure what i want for price so just send me an offer.

1: Bison tactical otter bag - Sold
2: lantac dragon 7.62 break - New $100
3. 419 arca/pic adapter - Sold
4. M4 pic carrying handle- New $30
5: hawkins 6mm break - Sold
6: bushnell nitro 10x binos - Sold
7: Arken 34mm rings - New $75
8: larue psr uni mounts LT112 - Used $150
9: larue 34mm 20moa LT177 - Used $175
10: SI rear sight pic rail for glock - New $25
11: Tyrant Designs p320 comp - New $75

I bought two because a company lied to me. Whoops. BNIB. $650 shipped, which is almost exactly what I paid for it including tax.

Great now they're just suitin up and strappin dead people . Oh look another shooter .
Edit: This is satire . I say this for the autistic that are watching the site . Please don't shoot my dog !