3x 500 same lot 109’s @ $350/each shipped.

2x 500 same lot 105’s @ $350/each shipped. 1 open box same lot with about 350-375(probably 400, I just lost track of actual number and not counting again) for $200 if bought with the others.

Giraud Power Case Trimmer+shipping
Shell holders$ 40 a piece

6.5 creed
30-06
243
308
6 creed
6.5x47
22-250
6.gt
Cutte blades $ 50 a piece

.30
6.5
.22
243

Grey ops plate $40 plus shipping sold to manhoot

Suppressors showed up so.... selling a few brakes. These are lightly used with all 5/8" X 24

• $125.00 - APA Little Bastard Gen 3 in 6.5 measuring 0.280" (caliber not marked on brake)
• $125.00 - APA Little Bastard Gen 3 in 6.5 measuring 0.280" (caliber not marked on brake)
• $100.00 - Area 419 Hellfire in 6mm with muzzle with adapter
• $100.00 - Area 419 Hellfire in 6.5mm with muzzle with adapter

Or all 4 for $375.00...

Shipped to lower 48 via USPS.

For your consideration is AN/PVS-24A NV clip on in good condition , glass in excellent ! Tube is very clean , no blems .. $3800 shipped .
Discreet PP FF / gift , Zelle, Venmo , Postal MO , CC +3%

1 sealed 500 count box of 6mm Berger 109gr LRHT. Lot # PR0296.

Bought these to trade for for 144s but eventually found 144s and don't need these now.

$SOLD

Up for sale is one Armageddon Gear Sticky Game Changer Pint Sized. The bag has the standard bead fill (3lb) and was purchased locally in NC. The bag was used for three "find it, range it, engage it" competitions on the east coast. I have retired the bag. It is in excellent condition. Outstanding piece of kit.



$75 for cash in hand if your in NC.

$85 shipped with tracking. PP F&F, Zelle, Venmo.



GNQ

I do not reload. Looking for up to 1000 yards. Mostly sub 800 and paper/steel. Will take out west to hunt, but not frequently.

I’ve seen the concerns of 6.8 sticking around.

Thoughts?

Or do I just stick with a 6.5 CM?

Selling my older Leupold. Fully functional with some cosmetic wear. MPN 170826, dimensions and specs can be seen below.

Leupold Mark 6

1000 shipped, sold as-is no box or mount. Please pm any questions.

This was used for a 22 creed for roughly 350 rounds... going to a magnum.

.308 Bolt face
Right hand 737R replacement bolt assembly
$375 Shipped to lower 48.

I have a Remington 700 aac-sd in 6.5 creedmoor. It has a Bell&Carlson medalist stock. If you wanted to get into shooting long range cheap this is the rifle for you. Shoots sub moa groups. Will sell with leupold vx3 3.5x10 tactical scope for $1400 or bare rifle for $1100 shipped. Thanks and god bless!

I'll start this off with Kopper's. I worked in the Large Casting Foundry right out of high school. The dirties, hottest job on the face of the earth. Once the molds were poured on the daylight shift, we came in and emptied the molds and set the casting on rail car. The casting were so hot, a few of the guys would cook their lunch on them. The casting sand got everywhere. Every part of your body would be covered in it. A mask was mandatory or you'd be dead within the week. I left there as soon as I could and went to work for Amtrak. Best move I could have made.

Koppers shut down that facility and moved everything to Erie PA where that foundry shut down, I've been told. I don't know if they are still in business but all I can say is good riddance.

Selling my MDT Ckye Pods, neither have been used at a match, just dry fire at home.

$675 shipped for the Double Pull.

Single Pull is SPF

The scope came with an AI AW, like new as well as the rifle, CW, MRAD, P4FL reticle (I assume), AI turrets, no scratches on the lenses.
AI mount and caps are included.
A cool collectible scope, especially, if you have AW / AWSM rifles.
$1860 shipped.

Looking to sell only, sorry no trades at this time.

Hornaday 6mm 108eldm projectiles
bulk packaged in 500ct boxes

1770 total (all the same lot)

3 boxes are unopened
1 box has 270 remaining

$600 shipped for the whole lot


payments accepted
paypal( pay f/f or add the fees)
postal money order
venmo

PLEASE post in this ad then pm me if you want them

I have a proof carbon barrel in 6GT and it started shooting worse than it usually does. I figured it was dirty, which it was, so I started with my normal barrel cleaning routine which consists of Patch-Out, Accelerator and nylon brushes. I use a quality cleaning rod and bore guide as well.

After cleaning, I go in with a bore scope just to see what things look like and I noticed a pretty big scratch from the freebore all the way about 2/3 down the barrel I have never seen before. It stays on the same groove of rifling the whole way.

Obviously only way to tell if affects shooting is to shoot it after cleaning, but curious as to what may have caused it.

Only thing I can think of is maybe a stainless bead from wet tumbling?

I'm really hoping this isn't what is causing this barrel to shoot poorly....

I own an LMT CQB.

It came with the standard 16 inch or so carbine barrel.

I came across a sweet 20 inch stainless steel barrel in the PX and bought it. I have probably fired 1000 rounds through it. Shoots great.

Any way, last night while cleaning the rifle I note a ghost imprint of the back of the gas key on the top of my lower receiver at the buffer tube.

May have been there since I fired my first round on the rifle.

I don’t like it.

Last thing I want to do is beat my lower or shear off the gas key.

Gas block on the twenty inch barrel is slightly forward of the 16 inch barrel gas block by maybe an inch, just enough to have it sit past the end of the quad rail. The sixteen incher is in the quad rail IIRC.

I’m thinking the extra gas going through the tube before the bullet exits the barrel is causing this.

Liking the twenty inch barrel but not liking the impact on the lower receiver.

Perhaps a heavier buffer or spring but What might do is cut the twenty to 18 inches which is what I really wanted for a barrel….hmmmm.

Hey all,
So it is nearly new car time and I have been pondering a new-ish Subie Crosstrek (The 6MT goes away for 2024 and still on the fence about the CVT tho the MPG is impressive and I have a 600 mile a week communte). Anyways, it ticks the boxes. More room inside that a 4runner, AWD, good MPG, timing chain instead of a belt, and not boosted BUT they run GDI and I see ere'body saying GDI sucks. Honest question here... Why does it suck? A little reading suggests that the right oil (something with a low brix number (?) aka less volitiles) and a seperator inline in the PCV system might keep the gunk in the intake to a minimum so what an I missing? TIA.

Edited to add. I am not a trade in every three years guy. I keep my rides until the wheels fall off. Current rig is 12 years old, 380K on the clock, and still gets 32MPG. Why yes, it is a Toyota.

Only 20 minutes in and its hilarious.

Login to view embedded media

The bear pit seems like the right spot for this.

Headed out to Wyoming for the May 15th spring bear opener. I've got a few questions:

1. I know there is a mountain of snow up there right now. Do you Wyoming folks think that enough of it will thaw in time to hunt them that first week?

2. 300 Wsm, 20" 1-10 barrel. Talk to me about what ranges I can reasonably expect to have opportunities at. I shoot prs and shoot regularly out to 1,200y, but I've been out that way and I know that wind is the real issue, so what is considered reasonable out there? I an asking because I have a decent selection of bullets available, and have time to get something else if I need to, so before I start loading ammo for this trip, look at the picture of what I already have please and let me know what you would do. Thanks fellas.

Hi Everyone
I ran the borescope through the barrel and found out the chamber area has some scratches and raised metal marks
Tried to chamber a virgin brass and closed the bolt, extracted brass has the exact same marks

I look at the bag of first fired rounds that I saw they have the similar marks so it can’t be my mistake during cleaning and etc…


This is a custom rifle with carbon fiber proof barrel and has about 150 rounds down the tube.
I am very disappointed since it’s made by one if the best custom rifle builders in nation!
-should I worry about these scratches and are they going to affect the accuracy and consistency in load development?
How about case lifespan?

- solution to get rid of them?

- do I have to solve this issue before continuing load development?

See my email exchange with a lawyer below. My question for you guys: in what ways is he right, and related, in what ways am I looking at this wrong?

A little more context: never worked with this lawyer before, he was casually recommended to me by my boss. I'm in my 30s, a poors, never bought property before. Good head on my shoulders, but admittedly not savvy about real estate or finance. Thanks for reading

###

Dave,
Mike gave me your contact, said you might be able to point me in the right direction.
I am buying some land and am considering putting it in a trust. After doing a little reading, these are some thing I think I am looking for:

-Asset protection
-Privacy
-Self-settled
-Irrevocable trust

I'm on a budget, don't know if anything like this can be done for around $2000.
Thanks,
tea&jam

--------

tea&jam

Thanks for your email. Preliminarily, my rate is $375 an hour. And as part of that, I would need to have an exploratory meeting with you to determine your reasoning for an irrevocable trust. You may have a good one, but I will need to tell you the up and downsides of that type of trust, as well. You may also want to be thinking of who may be a good trustee of that trust, because if you are doing it for asset protection, you will need an independent, unrelated trustee.

If it is a one asset trust, I can most likely do it for about $2,000, but cannot guarantee that if there is more work than expected involved.
Let me know if there is a good time next week to meet for you.

Thanks again.
Dave

--------

Thanks Dave,

Is 4:30 too late? Monday or Tuesday are best for me.

So we can have an efficient exploratory meeting, these are some things I would like to cover:

-Exhaust other possibilities to create the privacy and asset protection I am interested in
-Clarify the duties of the trustee, and the yearly maintenance the trust would require
-Clarify how a trust would work if there is a contract for deed or mortgage; can a trust "buy" land?
-Review if Idaho is a "friendly" state for irrevocable asset protection trusts, and if not, list some alternatives
-Look at an example document of an irrevocable trust

I can elaborate on my thoughts some, so we can hopefully stay under an hour.

Given that:
-It's harder and harder to have privacy,
-I do not plan on having a family or getting married,
-I believe our healthcare system is pretty much broken,
-I see a trend with the government becoming more authoritarian,
$2,000 seems like a reasonable amount to have peace of mind and insulate myself from institutions that I do not think have my best interests in mind.

Please let me know if you have any other questions or thoughts,

Thanks,
tea&jam

---------

tea&jam

I am sorry, but based on your input and desires, I do not think I can help you on this. To be honest, I think you are going to be disappointed with the result, because I really think that you are not going to be able to achieve the level of asset protection and privacy you are seeking.

I wish you the best.

Dave

This flawless M40A5 rifle is the most current USMC spec, built entirely by GA Precision. Contract ERATAC Two-Piece Rings and Harris Bipod included.

Rifle has approximately 15 rounds down range - barrel was professionally broken in (one round, clean bore, repeat.)

Price: 5000.00

S&B 3-12×50 PM II NOT INCLUDED.

Build Details:

• Remington 700 Short Action, Trued up with lugs lapped
• Chambered in 308Win/7.62 Nato Match
• Action slotted to USMC M40A3 Specs
• Remington Old style trigger
• Heavy ground recoil lug to Spec.
• USMC 30 MOA Lugged Base
• 25 inch (24 inch from Recoil lug) USMC Spec. 1-12 twist, 6 groove, Stainless Schneider barrel 1.200 for 4-inch straight taper, contoured to .749" for adapter
• Surefire Comp/Suppressor Adapter model MB762SSAL/RE
• McMillan A4 Stock, Sniper Fill, Adjustable Saddle Cheek, Spacer System LOP adjustment, O.D. Green molded-in color.
• 1 Stud, 6 Flush Cups
• PGW PVS-22 Night Vision Mount mounted in Stock
• 7075 Alloy Pillar Bedded in Marinetex
• Badger Ordenance M5 DBM Trigger guard with one 5rd magazine
• Remington trigger tuned to 2.5pounds
• Matte Black Finish

Buyer pays actual shipping; must ship fully insured.

Reading through the story the family is getting an independent autopsy and something tells me that they are going to get a shock when they find out that he died from an overdose or something else and that it wasn't the bugs. Or he may be the one unlucky bastard that was allergic to bed bugs. Ben Crump is on the case so rest assured he'll get to the bottom of it.
Anyone know what his cut of the pie is when the families settle?

Has maybe 60 rounds on it. No bolt release. Asking $160 tyd

Selling brand new 300 PRC barreled action with a GA Precision branded Defiance Deviant action and a 24" Bartlein heavy varmint #9 barrel, 1:10 to 1:9 gain twist, 5R rifling, threaded for a suppressor along with the thread protector, FDE cerakote, bolt finished in cerakote microslick, all gunsmithing done by Weber Customs. The action was $1500, the barrel $500, the gunsmithing and cerakote was $900. I'll sell the package for $1500.