Lucky or just that good

Selling a wiebad mini stock pad for a manners prs, in very good condition.


Asking $35 shipped.

WTS a used but in good condition Surgeon 591R (Prague, OK) 308 barreled action. Barreled action will come with the following:
*1- 20" 308 Bartlein 11tw spun by bugholes (549 rnds)
*1-Surgeon action wrench

308 barreled action: $1850 OBO to your FFL CONUS ONLY.

I bought this 100mm lens Amasight Zeus Pro 640 brand new. Took it out the case 1 time to test. Took it out again the other day to test it and discovered about a 3rd of the germanium lens coating (AR coating) was cracked, flaked, peeled off.
I've never touched it, cleaned it or used it yet as I'm still building my first AR15.

This is a disaster from what little info I can find online. Honestly there's nearly nothing on the subject except for some vague mentions of a thermal AR coating on thermal optics bringing the sensitivity from about 45% to 90% in thermal accuracy or sensitivity but it was pertaining to variables in thermal in general. It was also a post of some guys claim in a forum online. I found no evidence to support it much less anyone who had this issue. Google searches are fruitless.

Is there anyway to repair this coating? Ive read theres not. I spoke to opticsplanet and they won't take it back after 30 days. Ive had the scope almost a year. Flir has me registered under warranty for 1 year. My 1 year is up in about a month. Flir told me to contact Opticsplanet and if I run into any barriers to contact them again.

What is this coating made of? Can I still use the scope and detect over a mile away still?
Its a 100mm lens. the Armasight Zeus Pro 640. The best one they made.
I know the lens is 1st or 2nd most expensive part on the scope.
Im pretty upset. In fact I'm extremely upset. I spent just under $5K on this and never used it.

PLEASE, anyone out there can give me any hope or advice or ANY info I'd greatly appreciate it or just direct me to someone knowledgeable on this topic.

Thank you all.

200ct 65gr Hornady VMAX
250ct 55gr Nosled Tipped Varmageddon

$110 shipped

600 6.5 130 hybrids $300 shipped

500 of them are same lot, 1 box is a different lot.

Pm, PayPal FF only.

1st I’ll take it without conditions wins.

This is BRAND NEW. Only out of the case for serial verification for the 4473 and these photos. Comes with everything from the factory and is perfect without a blemish. I won't bore you with many pictures because it's 100% perfect and as delivered from HK, but I'm happy to send any number of detailed photos to serious buyers if that's a determining factor. $3850 shipped.

No trades unless you're trading me something more valuable and easy to move. Sorry.

A guy on here that started an action company with a new design. What happened with that?

I found this Washington Post article most interesting:

Wondering what y’all wrap your tripod legs with to help aid in using it as rear support? I have a QDT on order.

I think this is the V2 with some upgraded parts from Adam. Comes with everything you see including spare belts.
$265 shipped. PayPal g&s preferred
PM if you want it or have questions.

Appears the B-21 Raider will be "unveiled" tonight:


Wonder how much they're going to show. Most likely china has either stolen the plans or bought them from some dude name Hunter.

So it's been a while since there's been a 3D printer thread. Looking at one of these to make some simple gun related items (loadling blocks, data cards, etc), but I know nothing about them. Looking for a decent starter type machine. What's the new hotness with these machines in the $300-$500 range?

If you skip to roughly :54 in the video below you will see the thing that I think looks a bit funny. The video really does not do it justice, but in the "live" view it looks like it is crystal. This is a new rifle to me, and I have not shot it yet, the video is how it came out of the box. Corrosive primers are common in this rifle, and I was thinking it might be salt crystal? Just looking for other thoughts on it.

The rifle is a 1917 Westinghouse 91/30....pretty one at that. This rifle is unlike any of my other mosins, no other word but it feels crisp and sharp next to the well worn examples usually come across. I think this one got very little use, but clearly some use. Plan is to clean it up this afternoon, and shoot it some before the cold hits us again.

Was not really sure on where to put this topic....so the "vintage" section is where I am.

Login to view embedded media

Seems like a short action Remington 700 action is a little tough to find, and if you do find one it's pushing $600. Inflation hits everything.
Brownells still had some but now I see they are gone.
Installing a Criterion barrel onto a Remington is stupid easy and shoots really good, I've done it before so that's the plan again.
So who has 700 receivers in stock? And maybe for not stupid money? 223 bolt face.
Thanks in advance

What are your predictions for the Georgia special election coming up on the 6th? How will the cheating be conducted? Mishaps with the machines or mysterious late night ballot drops?

I personally hope Walker wins. Because if he wins that means a gun control Senator loses. Anytime our enemy on the other side loses is good.

I won a Howa 1500 in a raffle. I paid $38 for the entry so I don't have a lot in it. The rifle has the green Hogue stock, a cheap Niko Stirling 4-12x40 Game Pro Scope and has the 22" Contour Barrel (not the heavy barrel) and it's chambered in .308. It's threaded so I can put my can on it so that's a plus. But... As much as I like the feel of the stock, I kind of want to turn it into a chassis gun. So here are the options:

1. Just put a chassis on it as is
2. Re-barrel with a heavy barrel and add the chassis
3. Sell it and use the funds to build something the way I want
4. Just leave it alone and shoot the dang thing

Obviously, option 1 is gonna be the cheapest. How much will accuracy suffer due to not having a heavy barrel though? Is this worth doing?? Just looking for some opinions.

This is probably Ray Liotta's last movie

Login to view embedded media

Them crazy Asians. God bless their little hearts.

We have the following Pre-fits in stock and ready to ship!

- Impact/Stuteville Precision Prefits - 6BRA - M24 - 28" = $700 Shipped
- DTA Prefit - Benchmark Barrel - 308 - Rem Var - 22" = $1000 Shipped
- Proof 6arc AR Barrel - Stainless - 18" = $475 Shipped

- Rubicon Precision Barreled Actions - Defiance Nitrided Action - 26" Length - Calibers 6cm, 6.5x47, 6.5cm(others available as well) - $2200 shipped

AO MARS receiver (made by Defiance); short-action; fluted bolt, tactical knob; integral recoil lug; integral 20-MOA base.
Nitrided
Purchased from Accurate Ordnance new.
Has about 3000 rounds through it. No issues and is very smooth.
$950 shipped to FFL
Can send more pics if needed.

Seekins havak ph2 300WM

20 rounds down the pipe. $1600 FTF for rifle only in the case it came in. Will add in the pst gen ii 3-15 and rings for $550 more. YHM QD mount will be replaced with the factory thread protector. Sling not included.

Located in east TN. Looking to do a local sale at this time.

I will be traveling to central Texas through Arkansas during Christmas time also if that helps.

Why is this not exploding news in the gun world?


BLUF: serial numbers on a firearms were part of the federal Gun Control Act of 1968, and the Judge used the Supreme Court's June 24 ruling in New York State Rifle & Pistol Association Inc v. Bruen to dismiss the charge.

The implication seems far reaching. This should impact damn near everything from the federal Gun Control Act of 1968 as violating the Bruen "standard." My understanding is the ATF&E held an emergency meeting after the decision (albeit hearsay).

Proposing to ban the sale of gas powered cars. Geez does he think he's gonna be around that long? The fix is STILL in?

Hopefully this doesn't have a snowballs chance in hell of happening, but it goes to show that libs have absolutely zero common sense.

It's all about control comrade.

Phuck em.

Aaannnnddd.... its NOT about the environment

https://crosscut.com/environment/2022/11/gov-inslee-plans-ban-gas-powered-cars-2035-it-doable

https://nexuspmg.com/the-coming-ev-...sary minerals to,500,000 lbs of raw materials.

I gave this glove to a 12 year old player last year. He got two seasons of good play out of it. Now it's back for a tune up. I need to order some blue laces to finish it. I can't do much about the piping around the wrist. That kind of thing happens when kids don't take glove off between pitches. Tell you r kids to take the glove off between pitches and it will last a whole lot longer.

I have already called the kids dad and given him a hard time about the monkey knots.