Some news items are too important for PortaJohn...


"Mon Dieu! I slipped and fell on zee shell!"

This is a good "hey honey, check this out" item. The womenfolk always appreciate a true connoisseur of worldly events.

Disturbing X-ray pic slideshow top of article at link. Probably not a good screensaver for work

Selling my 16” unfired factory upper with non ambi sr15 lower asking $2500 plus ship but will talk. Just don’t need 2 16” knights in safe


Text for faster response 5707607246 first I’ll take it via text gets it

So me and a friend were debating the needs of a person shooting hitting nrl22x matches and rimfire prs matches.

What’s your school of thought and why.

Would you rather a top tier gun. Like a vudoo or a rimx and pair it with a Arken ep5 or a stroke eagle

Or

Have a cz or a b14r paired with a top tier scope. Think zco or razor gen3 etc.

Where do you put the money. The scope or the gun. And please don’t say both. We all know that the best gun and the best scope is the best combo.

Buenos Aires celebration. Supposedly 5 million shoed up. Fuck cities and fuck crowded cities.

Login to view embedded media

$90 each shipped.

Time to step up. Get out your resume and get in line. You will be either in front of me, or behind me. Good luck!!!

Changing direction with my shooting activities. This gets used very little. Very cool setup. Pilots are in the pic. 6 dahers/creedmoor/.270/.300 win mag/6.8spc pilots

Trades Im looking for in this order
1. Barreled Action with Trigger. Looking for Impact 737 or Lone Peak preferred, would consider a Zeus. 6 dasher barrel with no to minimal round round chambered by a reputable smith. I have SaC modular for 6 dasher so Id like to stick with that. Trigger tech diamond single stage trigger. Or Bix and Andy Tac Sport
2. High end AR10 in 6.5cm
3. High end AR15 in 6 arc

I've narrowed things down to either a SR25 or LMT MARS-H and fwiw, I shoot Lefty and want a full ambi platform. I've looked at lots of other weapons and while I'd ask you to feel free to chime in with other options, I'm pretty settled on these two. I've shot both of these before and like them both a lot with the SR25 getting a slight edge. The LMT felt like cheating at 350y, it was so easy. I've also owned a Tavor7 and Scar17 (multiple times) and never felt the 'love' for either to be honest. Time in the Army has made me an AR-guy I suppose.

Items to consider:
Will go with a 14.5" or 16" barrel using a DA FH so that I can run my Sandman S
Will use multiple optics depending on intended use that day, including thermal
I already have a SR25 lower inbound (can either use it or sell and make a bit of money towards the LMT
Because of multiple factors, this will be my 'go to' gun
I work a LOT of hours with a schedule that lacks any sort of structure coupled with limited number of local ranges so don't have the time to perpetually fiddle with things

Which route would you take? The SR25 checks all the boxes except for cost; the LMT has other Pros like barrel changing (that I'd maybe only use to get a 20" 308 barrel) with the only Cons I can think of being potentially being overgassed and then having to mess around with buffers, springs, ez tube, etc. and about half a pound heavier.

All feedback is appreciated and have a Happy Christmas everyone!

BNIB. Impact Precision short action 737R with .308 bolt face. Right hand. AI cut.

Getting rid of everything that's not a 60 degree bolt throw so this is up for sale.

$SOLD shipped CONUS from me to your FFL.

Pic for reference.

So I am a certified old fart now and as such I was out for my afternoon walk when I found myself in a new and interesting situation. I found myself if not directly in, very close to someone's line of fire, I could hear the gunshots closely followed by ricochets (Subsonic, either pistol or PCC). If had to guess I was less than 100-ish yards from the rounds point of impact and rather close to being directly down range from the shooters position. The problem was that I was on a bike / walking path in a "good" part of town at exactly 12 noon, not up in the mountains on the other side of a hill from a DNR shooting range.

Obviously this was a freak occurrence of me just being in the exact wrong place at the exact wrong time, but it did get me curious. I have a ring doorbell and I see all the time people posting about gunshots at various timers of day and night. Are you guys seeing a rise in gun violence or random shootings where you live or is the ghetto slowly moving in to my neighborhood? I'd be interested to hear your thoughts or personal experiences if you have a similar one. I did talk to a sheriffs deputy and they did find spent cartridges but I did not want to ask too many questions and appear suspicious.

Brand new never used. Opened the ST box to check contents only. Has 2.0 firmware already on it. Moving a different direction with my reloading shooting. The AD has been used with the ATV4 (already sold) in the picture.

Only trades Im looking is a new or like new MPA Matrix Pro for rem700 clone. Color not so important. Do not want a regular matrix.

Usually I’ll default to tikka but I’ve read you can’t seat them long enough in a long action. So what’s the next best thing? Under $1k. Primarily used for hunting.

I am gathering the equipment I will eventually need to do a barrel swap on my Howa 1500, and other rifles in the future.

Yes, I know the Howa 1500s are a sumbitch to change, and believe me, if I have doubts, off to the gunsmith it goes immediately.

I am posting to verify the equipment I will need as I have never done this before and thus I am ignorant.

1. Barrel Vise (I am looking at the Viper)

2. Action Wrench (I am looking at the Northland Shooters Supply version)

3. Savage-like barrel nut from Patriot Valley Arms (I would likely get the barrel from them too)

4. Go and No-Go Gauge (Clymer brand seems to keep coming up in my search -- is there better?)

5. Torque Wrench (Does anyone have a brand to recommend?)

6. Crow's Foot attachment for torque wrench to fit barrel nut.

I welcome your thoughts.

Thank you.

-Stan

LOL​

Don’t masturbate with Christmas ornaments doctor warns amid spike in seasonal injuries​

Dr. Welsh warns that inserting candy canes and other confections can cause infections.Jam Press
According to data by the UK’s National Electronic Injury Surveillance System, there were 13,213 cases in which people aged 25-64 inserting “decorating items” in their bodies in 2021 alone, Jam Press reported.

Go figure: Experts attributed the use of these festive foreign objects to “autoeroticism,” which Merriam Webster Dictionary defines as the “sexual gratification obtained solely through stimulation by oneself of one’s own body.”

It’s not just Yuletide baubles that have been found in peculiar orifices. Last fall, a randy Michigan got six kidney beans lodged in his urethra during a bizarre attempt at sexual gratification — known in the medical community as “sounding.” Meanwhile, in September, a 27-year-old man in India had to be hospitalized after allegedly shoving a deodorant canister up his butt, where it remained for three weeks before doctors removed it.

........... a magazine for Remington 7600 in 270/30-06. Please contact me at tspearsrphATaol.com.
Thanks in advance!

That could sink a company. Or Joe and company will forgive their buddies?
These banks are so crooked its evil.

Wells Fargo to pay $3.7B over consumer loan violations - KKTV​

https://www.kktv.com › 2022/12/20 › wells-fargo-pay-37...


3 hours ago — WASHINGTON (AP) — Consumer banking giant Wells Fargo was ordered to pay $3.7 billion in fines and refunds to customers by U.S. government ...

SOLD PENDING FUNDS

AI ATX-Elite Sand (non folder) with the following

*Brand new comp trigger installed by AI
*Hoptic 2 round holder
*Elite Sand short forend cover
*Bugholes bag rider
*MDT elite grip
*Wie Bad mini cheek pad
*18” AI 6.5cm barrel(had it cut down for Thunderbeast ultra 7. TB brake included with barrel. Not Ultra7

*New TS customs 6 dasher Hawk Hill. Shot 15 rounds to check it. One ragged hole (.1-.2’s). 6 dasher barrel will come with a 6mm ace brake.

*2 AI internal weights
*6 AI external weights
*2 AI AX mags with HRD BR kits (original internal as well)
*1 AI AX mag for 6.5 barrel

---

Killer setup but really liked my impact better myself over the three lug 2 stage trigger AI setup.

Rifle solo (with all the extras)$5100. Not parting out rifle stuff. Rifle has only seen bench and dry fire sessions on my tripod in my garage. Rifle shipped individual to ffl.

More pics up in a few hours. This is it with 6.5cm barrel

No luck on dragging San Fran off into the abyss but rocked far Nor Cal pretty hard.
Most of the North Coast out of power. I'm inland 60ish miles and responding to outages now.

1965 Catalog for your pleasure.

Brand new MK Machining MK2 Bullpup chassis for Remington 700 SA. Asking $1500 or best offer. Also will look at trades for FFP scope for PRS/NRL.

Looking to sell my Burris xtr2 4-20x50 with vortex pmr low rings. Scope is in mils, i have the box. Small scuffs on the parallax knob from the rough concrete benches at the range. Looking for $450 shipped

I have a PVA John Hancock rifle in 6.5mm Creedmoor with a 26" barrel, it may have 10 rounds through it from being zeroed and has been in the safe ever since. Bought it as a spare rifle for friends who wanted to try shooting at longer range and it just never got used. Does not include the brake but I’ll leave the hellfire adaptor on if you would like it.

Well now it’s time to move so I’m downsizing asking $1775 SPF OBO shipped.

Full rifle details

• New receiver developed in conjunction with American Rifle Company. The center of the John Hancock is the new 3-lug NUCLEUS® receiver branded for Patriot Valley Arms.
• The NUCLEUS® highlights include:
  • o Controlled Round Feed with a Claw Extractor
  • o Controllable Springfield style, Inertial Ejector
  • o Interchangeable bolt heads from 223 Rem through 532 Magnums
  • o Small firing pin arrangement with adjustable protrusion
  • o Keyed Recoil lug and tension-head locked scope rail
  • o Magazine compatibility with AICS pattern metal box magazines
• Rock Creek Barrels stainless barrel blanks
  • o Each barrel blank is gauged and lapped prior rifling
  • o After rifling the barrel is hand lapped, gauged and inspected
  • o ALL chambering and fitting work is performed using a full CNC process at Patriot Valley Arms
  • o Muzzle threads and caps (included) are 5/8-24 Class 3 for maximum compatibility with aftermarket muzzle devices.
• Patriot Valley Arms award winning, proprietary CNC process for turning, chambering and fitting barrels is used for all John Hancock rifle barrels.
  • o 100% CNC controlled cutting of all barrels
  • o 100% gaged and inspected for threading, headspace and chamber profiles
  • o Proprietary match chamber specifications from Patriot Valley Arms’ championship winning rifles are integrated into all John Hancock barrels.
• Kinetic Research Group BRAVO™ chassis system
  • o BRAVO™ features adjustable Length of Pull up to appx 14”
  • o Adjustable Cheekpiece and magazine well
  • o ARCA Swiss and RRS Rail Accessory Compatibility
  • o Black, Flat Dark Earth and Sako Green™ coloring
• Timney Triggers Featherweight Deluxe 510 adjustable trigger features:
  • o Pull weight adjustment from 1.5-4 lbs
  • o Creep & Overtravel Adjustment
  • o Individually hand calibrated and set to 1.5lb

The next obvious questions revolve around chambering selections and that answer includes more industry unique offerings. The John Hancock is available with barrels in the following calibers. Barrel lengths are posted next to the caliber. The 6mm barrels are 1:8 twist, the 6.5's are 1:8 and the 30cal is a 1:10 twist.

In really good shape other than the elevation turret screw. Spoke with vortex today and they said they would send a complete new elevation turret if needed. Done hunting with this for the year and trying to fund a thermal, would consider partial trade with cash on my end for an Iray Bolt tl35 or AGM adder.

Asking 1200 shipped with rings (rings not factored into cost because I got them for free)

LtS various items. Price includes shipping
PayPal F&F

SOLD Little crow world finest trimmer w/ .223 &.308 inserts
$40