BCM 5.56 upper. Was hitting PERFECTLY on target a few weeks ago and tonight when I went shooting with same ammunition I was hitting anywhere from 0.25-1.0" right consistently. This has been an issue I've had with 3 different uppers and 4 different optics so it's not my rifle.

The only things that have changed since last range session:

New BCG - but I was going from a mint condition NiB BCG to a mint condition DLC BCG so no change to mass.

Bipod instead of front bag. I'm loading rifle a bit more as a result, but besides that no change to form.

Different seating position (I was at a different range). Cheek weld and trigger discipline remained same.

Considering I've had this behavior with a bunch of different rifles it HAS to be something I'm doing.. but I can't think of it besides going to a bipod and getting a different BCG which shouldn't affect POI.

Also, just to make sure you all understand I don't believe my POI is wandering. Everything on my rifle is torqued to spec.

As the post says, I have a used to clean Nightforce ATACR on Spuhr 4002 mount for sale only. Will not separate mount from Optic.

Reticle is FC-DM.

Will ship overnight at sellers expense to lower 48 states via FedEx.

No box.

$2100 TYD.

Rob from AZ

6k 5k for the whole package minus the bipod
6.5x47 built by beanland more info in pics

Selling my LabRadar Chronograph and the LabRadar base plate stand. Only used a hand full of times, excellent condition, still has the plastic film over the display. Includes box, manual, and other paperwork it came with. Just performed the factory reset in the settings for the new owner. $600 shipped for both items.

So it's black Friday. A family member just asked me for help picking out a scope for her husband. Her budget is $350. I can up that budget to $450, as I know $350 won't go far (I realize that $450 doesn't go far either). The husband has been wanting a FFP 5-25 or 6-24 range. I typically don't follow optics in that budget, hence why I'm asking. Athlon Argos BTR 6-24, and PST Gen 1 6-24 are both in that range. Any others to consider?

Know of the Geissele, DSG Black Friday sales. Did not see a thread with trending site discounts. Anyone know of a barrel maker that has 6 ARC on sale? Other good sales?

Mechanix Wear has a good sale with free shipping.

Premier Heritage Tactical 5-25x56 for sale. Excellent condition in original box (see pics). 28 mil DT MTC CCW turrets, illuminated Gen 2 XR reticle. What you see is what you get.

$2680 shipped lower 48 - insurance is on the buyer if desired.

Looking to pickup a lefty ARC nucleus or archimedes for a 6mm prs rig. Any opinions out there? They have great rings but haven’t seen their action in person. Thx

Hello pit dwellers.

Ive got grain scales, but what is everyone using for a kitchen scale?

I want somthing that doesnt have to run on batteries and will last.
Maybe up to a 15ish pound capacity.

Please and thank you
Shred

Black Friday is here! We are doing a blanket sale of 10% OFF anything on our website. In stock or special order. If we don't have it, let me know and I can get it for you.

BLACKFRIDAY22 is the discount code

www.snyderprecision.com

Happy shopping!

Black Friday Sale

We hope you and your families had a wonderful Thanksgiving. We are now here 7 days a week until Christmas to assist you and do our best to hook you up. If what you are looking for is not already discounted on our site, call and speak with us, 516-217-1000.

Here is our Black Friday Sale Flyer. Take a look and remember we are here to answer questions and to help you out however we can.

Thanks for the year round support.

Check out our:

Just Arrived Section

Daily Flash Sale

Year End/Black Friday Specials Section

October Newsletter

Open Box Units

Demo's

Clearance Specials

Discounted Bundles

Specials Section

Please give us the opportunity to work together to deliver the Sport Optic or Camera you've been wanting. We appreciate all the orders and support.

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs.

Have a great day & please follow us on Instagram at gr8fuldoug1

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

Made in China: Oakley sunglases, Harley Davidson, Barbie Dolls, the list goes one. Dont buy Chinese.


Made in America: Buy American.

74 Brands That Are Still Made in America - Cheapism​

https://blog.cheapism.com › products-made-in-usa-16283



Sep 12, 2022 — 74 Brands That Are Still Made in America · Keeping Production Stateside · Weber Grills · Airstream Trailers · Gibson Guitars · Wilson Footballs.

Looking for a cheap accuracy international in 6.5 creedmoore, or a 308. Prefer an AIAE, as I’m pretty sure I can’t afford an AIAE, I could care less what the gun looks like as far as appearance is concerned. I’ve got some pretty nice stuff I can trade or I’ve got cash.

For sale
120 rds of Federal XM193 55 gr
100 rds of Frontier match 62 gr
100 rds of PPU 55 gr

Total is 320 rds as one lot for 135USD SHIPPED!

I'm selling a Proof Research 6mm Creedmoor, stainless steel, 22", 1:7.5. I'm including the custom length PR gas tube and a latest gen Seekins adjustable gas block. I slow fired 100rds of factory Hornady 108 ELD-M's to speed the barrel up and it was extremely accurate and reliable in a SP-10. I intended to shoot PRS gas gun with it but never got around to it.

This barrel:
ar-type

This Seekins Adj gas block:

$500 $450 $400 shipped.

Trades:
Aimpoint T2
SRO



Login to view embedded media

Login to view embedded media

Got out of the 300 Norma game so I no longer need the brass. There is a total of 200 in this set as follows:

118 pieces unfired Peterson Brass >>> SOLD
80 pieces 1x fired (50 have been cleaned, AMP Annealed, and Sized) >>> $85 Shipped

Prefer PayPal F&F, Zelle, or Venmo. Face to Face in Northern California may be possible.

Advice needed.
I currently own a Knights PVS30 with a FOM of 1952. I purchased this thinking that I would use it alot more than I do. I have owned it for just under 4 years and I'm still on my first set of batteries.
I really think I would use a dual tube, WP, set alot more, than my pvs30.

I contacted a local guy who knows a gentleman who owns a night vision company. It's not TNVC or anything like that. He gets in units that need repair, etc. Rebuilds, repairs them and then flips them for a profit. He has been very up front about that.

He has offered me a trade, straight across, for an ASU branded ANVIS that had a broken bridge that he has replaced. They are suppose to be aviation grade tubes and glass. Comes with mount and battery pack, and he says he will warranty them.

Is this a fair trade straight across? I am partially of the mindset that if he has what I want. It's worth it. However, am I cutting myself short in any way? Would I be better off selling what I have and purchasing something else? Are these comparable in value?

I will be honest, I thought I knew about night vision when I used it in the Army for 9 years, then purchased my first PVS14 omni 8 hand select from TNVC, then later the PVS 30....
NOPE, I'm just an end user, I don't know anything other than turn it on and run it.

So what is everyone's advice? Should I make the trade?

@buffalowinter

My Dirty Billys Campaign hat has shrunk after ten or so years.

Considering replacing it with something maybe a little bit finer. Maybe a liner and grosgrain that is more legit than the thin stuff on this one.

Who has the good replica millinery?

Not sure how this is possible but Rare Breed is selling the WOT trigger on their website. Anyone know how thats even possible?

So, this is part of the headlines here, and it makes me curious. Or am I looking 'far to deep into the premise'?


Seeing as they are specifically talking about reducing 'clots'.... and seeing as how the fashionable trend to follow has an incredibly HIGH amount of 'clotting'.... is this a case of (as the title suggests) only the RICH being able to continue living? Will this drug, like 'viagra' all-the-sudden be surprisingly effective on 'other things' that "we just didn't think about that AT ALL...."

Coincidence? Or am I looking far to into the quagmire to see conspiracies where they simply don't exist? Because nobody would do that to anyone else, ever?

Since the other one is turned into a grown man pity party over MDT like every year. If you find any new deals post them.

Hi All,
I currently shoot 338 lapua magnum (300 grain berger out of a 26 inch barrell in an AI AXMC). I am looking to take part in ELR matches and considering an upgrade to 33XC.

However I want to make sure that I dont just get carried away by all the advertised advantages (higher MV) but also understand the problems with this new caliber.

Are there shooters here who have shot both 338 LM as well as 33XC? I am interested in their opinion about advantages and disadvantages of 33xc vis a vis a 338 LM.

Please only add your inputs in case you have used both these calibers and/or you are an active ELR competitor. Grateful for your time and attention.


Harjeet

Looking at relocating to New Ellenton SC for a job. I was looking at a town just in the outskirts of town that looks fairly safe. Snelling is the town. Does anyone have any experience in the area? Crime statistics acts as if the whole area is pretty hot. Anyone know of rentals or safe places to live at?