Full box of 1000 primers. $80. No shipping. Located just south of Pittsburgh PA

... with a new and factory sealed 1-pound jug of Hodgdon Retumbo, happily loading some .338-LM cartridges using my Chargemaster 1500 ... when it started "clicking" just a bit. Ignored the noise for a cartridge or two, and it went away. Then when finished, I opened the valve to drain the unused powder back into the jug ... when it "stopped" with an obvious clog. Ended up pushing a little dowel up to unclog it, but it kept clogging back up. Set up a catch basin, and watched from above as I tried to clear the clog. Imagine my surprise when I found a 6mm bullet in the bottom of my powder reservoir.

The odd part about that is ... I don't own, shoot, or reload 6mm in any way, shape, or form ... and I know it came out of the Retumbo jug because I use this powder measure all the time, and fully empty it without fail when I'm done.

Anyone else ever find something "weird" in their powder jug? This is a first for me. Why couldn't it have been a Krugerrand, or a Bitcoin, or a box of Primers ...

Sometimes it feels like I am looking out at something surreal. Yes we have those walking around with a mask but the mask Nazi Karen's aren't around my AO. My wife had several surgeries over the past year and I walked around the UT hospital without a mask and only once was anything said. I looked them in the eyes and told them to mind your own business and that ended it.
It's like living in a bubble and everything outside is crazy but inside the bubble life is pretty normal.
I was not sure about the newly elected governor but he's been good. He pushed through the constitutional carry and now this.

Login to view embedded media
Login to view embedded media
Manufacturers, wholesalers, and retailers, be prepared for the ATF stack to show up at your doors. Hide yo wife, hide yo kids, hide yo dogs.

Does a buyer (me) have any protection on getting ghosted or something of that nature (misrepresented items are delivered, etc.) when paying via USPS MO?

Everything seems legit, and I don't want to sound paranoid, so I figured I'd check with the Hide peeps. I offered to do PP (even though they're anti-2A, but it offers some buyer protection) and pay the fees for buyer protection ($1200 scope purchase) but he's not a PP user. Seller seems legit. 10 year old account, 600+ post count, but no PX Feedback in his forum profile. Apparently had a ton of feedback in the old forum/system, but wasn't carried over, user name changed, something or other.
I've exchanged text messages with him, sorting out the details on the deal, questions, price negotiation, etc. Just haven't finalized it yet as far as payment is concerned.

Again, everything seems legit, I'm just hypersensitive to getting fucked in the mailbox for a grand.

USPS MO red flags, or gtg?

Never mounted, but I looked through it. Starting off at $2800/OBO shipped (2-day) & insured to you. Venmo/Apple Pay/PayPal all work.

As for trades, +/- cash depending… looking for one of the following or something similar for a hunting rifle:

6-24 Kahles SKMR3/4
Minox ZP5 MR4
TT315P
420 ATACR Mil-XT
Or whatever else fits in 34mm rings.

Hey everyone,
Beginner here so if I ask a stupid question let me know.
I'm looking to make a custom rifle as close to the M2010 as possible for training purposes. I would really like to use GA Precision to make the rig but so far contacting them has been impossible. I've called and left messages as well as emailed but have yet to recieve a call back. Does anyone have a better way of contacting them for a build or know of another company that would be able to accomplish a close clone? Here is what I've figured out so far.
-M24 action
-300wm
-Fluted barrel with m24 contour and threading for t-90 muzzle break
-Cadex lite strike

If anyone knows of a precision rifle builder besides GA Precision that could do this build let me know! Open to suggestions and information.

a little history.... I wanted to make a flight to Florida in December... however, my passport was not updated and I did not have a Pennsylvania Real ID drivers license... you need one or the other to fly, a regular picture id drivers license will not work... that was the beginning...

I look on the Pennsylvania DOT website and find that to apply for a Real ID drivers license, among other items, I need my Social Security Card.. who in the hell ever asks for that?? I only had one, from my childhood, and couldn't find it..

So, I go to the local SS office to sit in line, like the old days, in order to get a new one... It's closed to the public due to the administration COVID orders.. told that I need to fill the form out in the exterior lobby and include one photo id with my address and birth date as proof, along with the other information on the form... I have two photo ID's, my drivers license and my concealed carry permit... have to drive, so I dropped my permit in the envelope with the form and dropped it in the box for processing... the cop out front said it would be about 10 days...

30 days later, I get mail from them, and in it is my permit, but not the new SS replacement card... was told that it would come separately when I called the general SSN phone number, after waiting 40 minutes on hold... asked if I could expedite it in any way... they gave me the internal number for my local office...

I call them, and a very officious lady was on the phone, ran me through the question routine, name, ssn, address, etc... she scans my request on the computer and; "Well, you submittted a concealed carry permit as your proof of ID... we DO NOT ACCEPT THAT DOCUMENT"... after a few rounds of "tell me why?" I wind up telling her to go kiss Biden's ass and hung up...

so moral of the story... don't expect the Government to think to0 highly of your permit...

Yous all seen this ... didn't see a post



Login to view embedded media
A Zero Stage Trigger, coming soon!
This has been my pet project for the past few years!
A few years ago we set out to solve a few problems with triggers:
- Reliability
- Consistency
- Accuracy
After a lot of work and engineering hours we determined that the most effective way is to introduce an electronic solenoid.
This solenoid would allow complete engagement with the sear and therefore be less prone to issues due to wear.
Because Modular Driven Technologies - MDT is not an electronics company, we partnered with Labradar. We handle the mechanical design, and they handle the electronic design.
After years of design and testing, we now have our first prototypes. And the results are spectacular!
These are the details of the Ignition Zero Stage trigger
- Zero Stage (No movement of the trigger shoe, should increase accuracy)
- Programmable pull weight, starting at 2oz
- High level of consistency
- High level of durability (pending endurance testing)
- Water/Dust resistant
- Battery life of over 1000 shots. Battery charges in 10 minutes
Want to be a beta tester? Sign up at ignitiontrigger.com
Here is a picture of one of the first prototypes, and some reactions of the first people that tried it out!

It seems the stepfather already had previous child molesting/harassment charges and even had an outstanding warrant for "continuous sexual abuse and assault family violence"

Probably not good.

I know he was already associated with the liberal side of the court from the time Clinton nominated him but we could get worse.
Go Brandon and his morons have an opportunity to install a younger and more extreme judge that we have to deal with for the next 40 years.

./

Deleted on social media in 3… 2…….

Login to view embedded media

I have a brand new Terminus Zeus RH Short Action .308 Bolt Face Full Length Threaded (EDIT) asking $1,200 shipped to your FFL. Ended up going with a Kelbly's on my new build. If you have any questions please let me know.

Bushnell Elite Tactical LHRSi 4.5-18. This is an awesome scope. Great glass, 10 mil per rotation low profile elevation turret and capped windage turret which I think is a great design.
$700 shipped

Bushnell Elite 1 mile 7x CONX range finder. It’s a nice range finder and I’ve ranged steel targets to and slightly past 1,000 yards at a PRS match with it.
$200 shipped

As I sit here overseas, away from home, I feel we as a country are heading to an arena rarely seen throughout history. International events, governments, and people gone awry for a multitude of reasons.

Just a reminder of the sacrifices of previous generations:

In Flanders Fields

In Flanders fields the poppies blow
Between the crosses, row on row,
That mark our place; and in the sky
The larks, still bravely singing, fly
Scarce heard amid the guns below.
We are the Dead. Short days ago
We lived, felt dawn, saw sunset glow,
Loved, and were loved, and now we lie
In Flanders fields.
Take up our quarrel with the foe:
To you from failing hands we throw
The torch; be yours to hold it high.
If ye break faith with us who die
We shall not sleep, though poppies grow
In Flanders fields.

Groote Oorlog in de Westhoek | Westhoek

Als je de Westhoek bezoekt, is de Eerste Wereldoorlog nooit veraf.

www.flandersfields.be

a powerful musical rendition of this poem by one of my favorite bands, Sabaton:

Login to view embedded media
Mark Twain said something to the effect of history doesn't repeat itself, but it sure may rhyme.

Even if a person filed a Form 1, was approved and has the tax stamp in hand, they still must surrender or destroy their suppressor.

Login to view embedded media

In response to what may turn out to be a favorable ruling by the Supreme Court and concealed carry permits in NY, the lowest forms of humanity the state has to offer are already preparing their counter-attack.




DispositionMatrix

New York Democrats sponsor bill to ban carry on public transport, gatherings >14 people, in restaurants​

1
https://assembly.state.ny.us/leg/?defau ... s=Y#A08684

Amd 265.01-b, Pen L

Prohibits firearms in certain locations, including but not limited to all forms of public transportation, large gatherings, and food and drink establishments.

Click to expand...

1 Section 1. Section 265.01-b of the penal law, as added by chapter 1 of
2 the laws of 2013, is amended to read as follows:
3 § 265.01-b Criminal possession of a firearm.
4 A person is guilty of criminal possession of a firearm when he or she:
5 (1) possesses any firearm [or]; (2) lawfully possesses a firearm prior
6 to the effective date of [the] chapter one of the laws of two thousand
7 thirteen [which added this section] subject to the registration require-
8 ments of subdivision sixteen-a of section 400.00 of this chapter and
9 knowingly fails to register such firearm pursuant to such subdivision;
10 or (3) knowingly has in his or her possession a rifle, shotgun, or
11 firearm in or upon the following locations:
12 (a) Any form of public transportation, including but not limited to
13 railroads, ride sharing services, paratransit services, subways, buses,
14 air travel, taxis or any other public transportation service;
15 (b) Food and drink establishments; or
16 (c) Large gatherings, which for the purposes of this section shall
17 mean a gathering together of fifteen or more persons for amusement,
18 athletic, civic, dining, educational, entertainment, patriotic, poli-
19 tical, recreational, religious, social, or similar purposes.
20 Criminal possession of a firearm is a class E felony.
21 § 2. This act shall take effect on the ninetieth day after it shall
22 have become a law.

Click to expand...

Up for sale is a gently used Quick Change Terminus Zeus .308 action. Approx. 1k .308 rounds down the tube.
FFL to FFL only
***sold*** PP F&F or Crypto (BTC,SOL,ETH)
Action: $1250

Barrel: Straight Jacket Armory 20in medium palma 1:8 twist Proof barrel: $480

***Pics will be posted 1/25/2022 evening***

Anyone familiar with this brand? I got an email, guessing I was opted in from one of the gun giveaways I enter in sometimes. Looking at their stuff, it looks really nice I just know nothing about the brand.

As many of you know, EOTECH has released a new line of thermal optics in the US. They are working with Theon Optics out of Europe and the clip ons are being rebranded under the EOTECH name and imported into the US market. All three of the optics share the following:

• Ruggedized/50 cal rated
• 10 yr warranty through EOTECH
• Standard NV height above rail
• Up to 10 hr run time on 4 AA lithium
• Auto shuttered or selectable manual shutterless NUC

There will be 2 models that EOTECH will sell through their normal channels.

ClipIR

50mm f/1.1 lens

12.4 deg FOV (should be best on 1-6x optics)

17 micron

60hz with 30hz power save mode

640x480 OLED display

BH/WH polarity

MAP $12,119

ClipIR-LR


75mm f/1.1 lens

8.3 degree FOV (3-10x optics)

17 micron

60hz with 30hz power save mode

640x480 OLED display

BH/WH polarity

MAP $12,869










A third model will be offered by EOTECH through distribution by Down Range Thermal (limited #s)

ClipIR-xELR

83mm f/1.0 lens

5.3 degree FOV ( optimized for 5-18x optics)

12 micron

60hz with 30hz power save mode

1280x960 oled display ( unity clip on mode is 640x480)

BH/WH/Edge Detect polarity

Optional wired remote avail

Winner of UK MOD SILLS procurement ( paired with AI 338 and S&B 5-25x56) and CANSOF Thermal Clip ON

MAP $15,989

Last October my father in law passed away suddenly. His house which is out in a rural farming area -as in flat wide open, his farm -is now being maintained by all of us. All has been well until a family friend who was plowing snow from the driveway noticed the license plates on his truck are gone. Theft is suspected. Later today local law enforcement will be meeting with my sister in law for a full report. We have been considering some type of camera system to keep an eye on things. I started sniffing around but wanted to ask members if there is any system they would recommend? Thanks as always!

Doug

45:25 or so

oh man i was dying.
Login to view embedded media

I just threw out 60 pounds of rice that were infested with weevils. Not that much money… but a flaw in my system none the less. Now I have to check all my supplies and retreat. Go check your supplies.