Selling a few items I've had on the bench and will not be using any time soon.

Vortex Gen III 6-36 Tenebraex FDE Caps
- Like new
SOLD

KAC Miro Iron Sights Set
- New, factory take-offs
SOLD

Vortex Low Pro 34mm Bubble Level
- Used, great condition
SOLD

LWRC 5.56 Advance Combat Bolt
- Used, good condition
- Nickle boron coated
SOLD

Unknown 5.56 Bolt
- MPI marked
- New, unfired
SOLD

No trades please.

BNIB Nightforce 7-35 ATACR Mil XT

$2699 shipped

Remington 700 or clone Manners TCS for sale. Not sure on what the color pattern is. Stock is in great condition. Comes with 1 butt stock weight and 1 arca rail weight.

Only flaw I can find is on the front of the mag well where there are small scratches from fix it sticks on the action screw. The scratch is pictured.

$ obo PayPal f&f

I have the following that I am trying to get rid of.. Most of which was purchased a while back and has never been used. The upper and 226 both have very low round counts. Everything else is virtually brand new. Everything is priced under what was paid.

1) $1,850 - Custom 6mm Arc Upper receiver - SUB 1/2MOA all day long
- Geissele Upper
- Geissele Mk18 Arca Rail
- Proof 18" carbon barrel
- Superlative arms adj gas block
- Surefire break
- JP full mass BCG with titanium firing pin
- Radian Charging handle
SOLD

2) Sig Sauer P226 Legion with Safariland 6390 ALS
$1,200 $950

3) JP enterprises Ultra Low mass carrier
$300 $225

4) Geissele MK8 10.5 handguard with nut
$250 $200

5)Safariland 6395 RDS Multicam Cordura
-Sig P320 full size x300/TLR1HL
$150 $100
SOLD

6) Spiritus LV119 Front/Back plate bag in Multicam Black
- Size Medium
$175 $125

Looking to sell

Steiner DBAL I2 9006 tan with LEAF sight. Asking 700.00 Will add pics tomorrow. Bought from another member just a few weeks ago. Will come with original pressure switch and box and will throw in surefire SR07-D-IT.

This is my bottom price so don't ask for anything lower.




Doc

Our beloved "Chrissy" has passed away due to breast cancer. figures...

RIP Chrissy.

I'm trying to track down what is going on with some irregularity in my resizing process.
I have a bullet central sizing die for my 300 Norma, I'm using a redding t7, I set my die up to the headspace I'm looking for, locked it down, use Hornady case lube, and size 100 pieces of brass. 90 of those pieces are within a half thousandth to a thou of each other, but 10 pieces were three thousandths shorter than the shortest of the rest of them. Is there anything obvious that I should be looking for? I generally like to test the first few pieces and then just keep moving with my process, but this is giving me trust issues lol.

Just got to my FFL and I don't have the patience to wait for a year. Never done one of these, assuming it's a FFL to FFL transfer.

2k (what I paid)

Sold

Bartlein #14 m24 carbon 6.5 blank 7.75 twist and will finish at 24 inches.
These are $780 at GA Precision
I’ll let it go for $600 shipped. No trades

Sent it.

Login to view embedded media

Recently bought a Fix It Sticks tool kit with individual torque limiters, plus a 140 in-lb unit. These were purchased directly from the manufacturer.

There is barely any audible click from them when reaching the torque limit. They do spin, so they appear to be working properly. All their advertising, including a YouTube video demonstrates a very audible click.

I just attempted to contact them again, with no response the first time.

Anyone out there with a similar experience?

Pictures

New picture.

Legacy KAC - SR25 ECR - 7.62x51 20” barrel This is the base rifle for M110 clone builds. Comes with KAC case target and case. It’s had 154 rounds through it.

Light pitting from suppressor use on the barrel. If you continue to use suppressed or cerakote and clone it will not be an issue.

Ok to sell the upper only if buyer prefers they’re lower.

West side of Houston- ok to meet locally. If local: Bill of sale used, LTC preferred.

Price reduced- irons and prs stock removed. $7,800 complete rifle, cash zelle wire.

Feel free to ask for pictures or questions. Thanks. Significant feedback on GAFS. Feedback on arf. Thanks!

MPA scope mount, 0MOA 34mm -1.125”.

Barely used. $180 shipped
—————————————————————————————————————————————
BT13-QK: Mid-Height Accu-Shot® Precision Rail Monopod - upgraded with the steel tac-cap

Used once (indoors), great shape. $80 shipped
————————————————————————————————————————————

(SOLD) Thunderbeast Bipod (SOLD)

(SOLD) Barely used (once or twice, only indoors), great shape. (SOLD) $400 shipped (SOLD)

—————————————————————————————————————————————
(SOLD)APA Gen 3 Little Bastard Self Timing Muzzle Brake 5/8x24 6.5mm Black Nitrided (SOLD)

(SOLD) Never used. $100 shipped (SOLD)

—————————————————————————————————————————————
Prefer GunTab for all payments. Thank you!

Selling my HK MP5F machinegun. Would never sell but divorce sucks.

Registered receiver from hard times armory. Build used a minty MP5 F complete gun and was built by Joe at Dakota tactical (one of the best HK builders). Has 3 round burst and all the “F” upgrades

On a form 3 at my dealer. Will ship to your dealer as soon as form 3 is approved. So, you could start a form for next week!

Unfired after build

PM for tons of pics

$45k sold!

I honestly don't even remember what this was on when I picked it up. I already have a decent scope on my 22 so this will sit here and never get used. If you have a use for it, it's all yours. Just shoot me like $15 for shipping if that's OK with you.

Comes with a set of X-high 6-screw rings. Looks like weaver or the similar cheaper rings.

- Keblys atlas action
- Manners T4a elite with NV bridge
- Bix N Andy tac sport pro
- Bartlien MTU barrel chambered in 6xc
- APA lil bastard
- Arken 6-24 mil/mil with badger usmc rings
- 200 pieces of 1x fired peterson brass
- 500 dtac 115
- forster dies

This rifle has only had 200rds put through it. All work was done by Elemental Industries.

$3400 with scope shipped and insured
$3000 without shipped and insured

She many indeed have had a drug problem, or maybe even died suddenly from you know “unknown causes “ like so many millions of others the last few years.
Or maybe “Clinton’’d” or I guess “Epstine’d”.
One of the red flags at least for me was almost a year long investigation to conclude accidental overdose . Or maybe it was and in my book rich elite international child sex traffickers killed her all the same .

But any day now I’m confident that joint law enforcement task forces around the country will start arresting people from the infamous client list , you know the people that payed money to travel to a tropical island to Fuck kids . Any day.

Labradar with BT
JKL Trigger
Tripod
Bag
3d printed sighting device
Reading materials
I will reformat the SD Card for you
Has been upgraded to the latest firmware and functions with the app.

Several years old. Functions very well.
Velocity measured on the second image must be from the dogs tongue otherwise it is to show BT connectivity.

Asking 550 shipped

Hawkins precision certificate for ultra light tactical rings for sale diameter of your choice.

100 shipped

Barreled action kit includes barrel and action (unassembled) Can add Trigger tech if needed.

AnTi X Nitrided Short Action Magnum Bolt Face + CF Prefit $2525 shipped

Out of Stock AnTi X Nitrided Long Action + CF Prefit $2525 shipped

6.5 PRC 24”
7 Saum 24”


7 PRC 22”, 24”, 26”
300 win mag 24”
300 prc 24”
300 prc 26”

For those who have actually experimented with reduced mass or light weight bolt carriers, how much difference in felt recoil is there from reducing the bolt carrier weight by 2 ounces? Can you actually tell the difference?

Assuming acceleration of 100m/s2, a 2 ounce mass will produce about .57 kilogram-force which sounds like it would be a discernible difference in felt recoil but without real world experience, it's hard to say.


For context, I currently run a JP Ultra LMOS aluminum bolt carrier in a competition rifle with tuned gas system and JP captured recoil spring and am wondering what would happen, exclusively from a felt recoil perspective, if I go to a titanium bolt carrier that is 2oz heavier. I know I would have to re-tune the gas system and potentially the recoil spring. That's fine. Just wondering how much impact it would have on felt recoil from adding the 2 ounces.

I bought this a couple months back to shoot sporting clays and went a total of 3 times. I thought I liked it but it’s just not my thing, maybe in 20 years. It has exactly 125 rounds through it.

The gun cost me $2673.93 OTD at Coles. It will come with the full choke set, manual, and all that good stuff plus the upgraded case.

*Presentation case that’s pictured has been sold. Shotgun will ship in its original case.*

$2400 $2200 $2000 shipped FIRM. Payment via Zelle, Venmo, USPS MO or certified/cashiers check. Can do FTF near Tampa as well.

Trades:

- ZCO 420 or 527. I’m open to any of the tree mil reticles. My only requirement is that it’s the non locking elevation.
- Leupold MK5 5-25 PH2 or T3 or 3.6-18 T3.
- Seekins PH2 NRL 6 or 6.5 Creedmoor.

Phil Hemphill has died, he was the 10 time National Police champion and a two-time Bullseye pistol champion. I had the pleasure of shooting next to him many times over the years at Camp Perry. I scored him when he won the Distinguished Revolver one year. He was nice to everyone who ever walked up and wanted to say Hi.

Selling my leupold mark 5hd 5-25 with the pr2 mil reticle. Also includes leupold mark 4 rings at 1” height. Scope has been on a 308 Bergara. Asking $1725 shipped. PayPal or Zelle only. Not looking for any trades at this time.

For sale is a tikka t3x compact right hand in 223. I purchased this rifle brand new. It has 250 rounds down it. Comes with box and all factory accessories. The action was used in another stock that I had so this stock has never been used, hence the stickers are still on it. I do not need 2-223’s in my life. This one shot well with factory ammo and it seems to like 80gr eldms and varget. It was left over load I had for another rifle, so no load development was done. Also I did decent with 73 Eldm hornady ammo.

Asking $675 shipped to your FFL. In you’re in the houston, TX are we can do face to face at a lower cost but you will need a LTC and we will do a bill of sale.
Preferred payment is PayPal FF discrete, Venmo, or usps MO.