Latest activity

wvfarrier · May 14, 2025

The Prosecutor tricked her attorney into admitting evidence that had been excluded. It was fairly bad. It dismantles her argument about wife swapping from what the news reported

MarinePMI · May 14, 2025

N_Turs said:
Gotcha yeah only reason I ask is I was looking at the conversion kit for the powder drop just the other night and it looked to me that it fit over the od of the next and doesn't go into the case like pistol stuff. I could be wrong tho I haven't loaded any rifle rounds with it yet. Anything else with what im trying to set up you might do differently.

That's interesting, since I know the .300BO powder drop definitely goes into the ID of the case mouth (I ordered an Armanov one IIRC, because I didn't want to pay for a complete conversion kit when all I needed was the drop tube and the plastic case feed adapter, since I already had the .223 conversion kit).

LeftyJason · May 14, 2025

nkk said:
The standing US president is a draft dodger

Except that the President is the Commander in Chief.

EddieNFL · May 14, 2025

Long Range 338 said:
OP

I'm willing to entertain what I consider TDS ramblings, but you're going to have to back up your conspiracy theories with something more than referencing your own thoughts....

You obviously do not know how mental illness works.

mosin46 · May 14, 2025

lariat said:
A lot of what is going on in the ME has to do with breaking up BRICS (or at least keeping it at bay), minimizing use of the SWIFT alternative and holding on to dollar hegemony as long as possible. When looked at it from that perspective, what he is doing with them and the tariffs begin to make more sense than it otherwise may.

It's an economic war. He is trying to bring everyone back in line while cutting China off at the knees.

i begin to get that. way over my pay grade. some of his actions seem flighty and inconsistent. China is the enemy FS,not Russia. anything that pushes Russia closer to China is a big mistake-eg Ukraine. dealing with Chinese influence and corruption of our elites and pols is gonna be a big fight.

skyewalker · May 14, 2025

Rob01 · May 14, 2025

snowplow said:
Hmmm, l thought the rail on AR-10 platforms were about 1/4" taller?

No that is not a steadfast rule. I have never put anything lower than 1.5” on my large frame ARs and never an issue but I did try a 1.3” mount on an AR15 and had to push my face down hard to get down behind it and get a good sight picture. It was traded out swiftly to a 1.5”.

Also depending on the rifle if it has a full picatinny rail down the hand guard a 56mm scope like the EP-5 will also need more height to make sure it clears.

nkk · May 14, 2025

kthomas said:
my BIL lives in a coastal Eastern European country, and there's Ukrainian draft dodgers everywhere.

The standing US president is a draft dodger

mosin46 · May 14, 2025

would think that white SAs would start bailing ASAP. Rhodesia went as said above. remember Kenya,Kenyatta and the Mau Mau? same deal. he is now the "father" of his country,got an airport named after him. your basic terrorist sorta like Arafat-sucked on by the liberal west. results similar. the new Syria is another slaughter house. we seem good at making those or allowing them to develop.

ZA206 · May 14, 2025

DairyDictator said:
Why bother with a priming system? Personally, I don't know anyone who primes on the press. It's all done with a different tool.
Here's a solution for anyone real intent on priming on the press.

The cool part about it being ARCA spec is it's pretty easy to make whatever you want using super cheap clamps at least.

If your press never moves, it's a non-issue. If you have to move your press around, it's a mild inconvenience.

I don't prime on press either, but many people do and a good solution that's an add on would have probably been a worthwhile upgrade. Almost every other turret and single stage press on the market have some sort of factory supported priming capability.

I don't move my presses, but I know some do. I think the % that do move them around is VERY small.

CStroud · May 14, 2025

@trophyhunter has done one for me a few years ago, and Fritz at Black Canyon Customs does them as well.

lariat · May 14, 2025

mosin46 said:
Qatar is a known financier of terrorist orgs and a known hiding place for their leaders-Hamas anyway. so,WTF? letting up on the new Syrian mass murders? WTF?

A lot of what is going on in the ME has to do with breaking up BRICS (or at least keeping it at bay), minimizing use of the SWIFT alternative and holding on to dollar hegemony as long as possible. When looked at it from that perspective, what he is doing with them and the tariffs begin to make more sense than it otherwise may.

It's an economic war. He is trying to bring everyone back in line while cutting China off at the knees.

6point5CM · May 14, 2025

Who are you gonna have do the work? I’ve thought about going that route as well.

diggler1833 · May 14, 2025

^ I like that reticle.

N_Turs · May 14, 2025

MarinePMI said:
I'm fairly certain my setup flares the case slightly, but I could be wrong. I run BT bullets though (bullet feeder), so maybe I just assumed it flared the cases slightly.

TBH, my 750 is on an autodrive, so I didn't really give it much consideration, once everything was running correctly and the bullets were sitting up straight.

Great. This is going to bug me now, until I go check.

Gotcha yeah only reason I ask is I was looking at the conversion kit for the powder drop just the other night and it looked to me that it fit over the od of the neck and doesn't go into the case like pistol stuff. I could be wrong tho I haven't loaded any rifle rounds with it yet. Anything else with what im trying to set up you might do differently.

LeftyJason · May 14, 2025

Maser said:
One of the rare times telling someone to go fly a kite is a positive thing.

Little too strong for most kites. Prism kites top out at 25mph.

Wouldn't want to anyway. My prism snapshot 1.4 (2 string foil stunt kite) gets moving super fast at 20+ even with its tail. Gets harder to control.

Lawless · May 14, 2025

AVvXsEjlmsHKD9BMAUVlKF9IrzFh8kSi6o3Ok9OOwpi7LyFszLhLhC3DjYxmBoVrbdpOOE6JLCnAx5AhJkEnNIqXwsdczWyVbM8Pv9rdgPza3CXM2N1-uiH9e9jSfRUseSGfvlH4jXkdImsF__e4k0I3VZc4UnW2xGGACB8e2GfDnQzJXMSHy_e9nkIdfsnGLGA

Lawless · May 14, 2025

AVvXsEj_z78eVIuODmZQfSlFrpwzbSvKP9z1HH8dkbfV551S8fL3d-GcwbPepXUQRDqBbYzewQteXJvB2E4EQN61Rc_9Nidx0XG9Gevefcpz66m-53PSCZGFlP_ke_pyxEeuhAzhveL5FXgb6TDR9bEevZV1708arxmMoiO0HsCGlQzvrYd4us0W5QfB5sPGvJU

mosin46 · May 14, 2025

Fig said:
LOL!!! Those Chicoms may think African men are shiftless and lazy, but it appears they have no problemo with Brown Sugar!

i've actually been wondering if or when Chinese men would start bringing in African women. they have a big young male excess mostly due to past 1 child policy. 1st born girls were often aborted or just killed. male heirs is a big deal not just in China. but if you only get 1 then...
of course we have no idea how much of the surplus was let in here by Obiden.

Maple One · May 14, 2025

Capture d’écran, le 2025-05-14 à 14.57.47.png

Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

Latest activity

Latest activity

Filter