6.5 PRC barreled action built by Pierce Engineering. This package includes Proof Research 20" barrel (approximately 600 rounds fired) This Action is extremely accurate and shoots sub-MOA or better. Custom built in October 2024. Non-timed Thunderbeast muzzle-brake BA included as well. Badger Ordnance Mini Tactical Bolt Knob. Brand New Vision Pro Chassis with folding stock and top rail. weights installed in the stock.

The action weighs 15.5 ounces. Without the trigger, the rifle action plus barrel weighs 3 pounds and 11 ounces. The total weight of the rifle without the scope is 6.84 pounds. Additionally, the weights added to the stock and top forend rail can be removed to further lighten the chassis.

**Still Available for Sale:**


- **Rifle chassis and BA**: $3,580 (without trigger). With the single-stage, flat-faced diamond trigger, the price is $3,780. The rifle comes in a black plastic rifle case and will be bubble-wrapped inside for protection. The bolt will be removed and wrapped separately.


- **600 Rounds of 6.5 PRC 147 gr ELD® Match Ammunition**: $1,280 (shipped) in six new MTM CASE-GARD plastic holders.


In addition, there are next to new Accurate magazines in 6.5 PRC:
- Two extended 7-round magazines: $85
- Two 7-round magazines: $65
- Two 3-round magazines: $55


Please note, shipping will not be available until June, but feel free to reserve any of these items prior to that date.

I bought this rifle new and have shot it less than 40 times. One trip to the range is all I ever used it. There is a small scratch on the barrel from banging around in the safe. $900 shipped to your FFL

So I wanted to build a clone of the M40 USMC sniper rifle for the vintage CMP sniper matches and multi purpose role and have been researching it on here and various forums and have learned a whole lot in a short amount of time. After seeing some reviews here of other members using EBay user Beever156 M40 stock; I ordered one for myself and from the previous users of this stock; I knew I had to modify the forend to match the contour to make it look as orginal as possible. Thanks to @USMCSGT0331 info on the stock and pretty much entire build spec, I was able to make comparisons. These are my measurements (mind you human error/accuracy of calipers/measurements at the exact right point) compared to the real deal. Not sure if this helps anyone but I’d figure I’d post it. There are some measurements I left out because I couldn’t get a exact point on measure on my stock.

Now to begin the sanding phase of the build.

Link to builder guide to the M40:

A. Length from the front of the recoil lug to the tip of the forend
Orginal average-10.080 Beever156-10 3/4

H. Width of the stock at the tip of the forend (right before it starts to taper off)
OA-1.369. B156-1.514

I. Width of the stock at the front sling swivel
OA-1.512 B156-1.641

J. Width of the stock midway on the forend (4 inches from the front of the recoil lug)
OA-1.727 B156-1.721

K. Width of the stock at the front of the recoil lug
OA-1.851 B156-1.780

L. Width of the barrel channel at the tip of the forend (right before it starts to taper off)
OA-0.974 B156-0.975

M. Width of the barrel channel at the front sling swivel
OA-0.985 B156-0.985

N. Width of the barrel channel midway on the forend (4 inches from the front of the recoil lug)
OA-1.011 B156-0.999

O. Width of the barrel channel at the front of the recoil lug
OA-1.336 B156-1.293

X. Height of butt
OA-5.076 B156-5.070

Y. Width of butt
OA-1.630 B156-1.633

OAL – Stock overall length (without buttplate)
OA-30.0 B156-30 1/4

Yes this 2 years ago but it just popped up for some reason.

Login to view embedded media

Selling my Preferred barrel blank 6 Creedmoor Barrel 24 inch with less than 200 rounds fired through it.

Comes with silencer co ASR muzzle brake.

Asking $400

Or maybe its me

OK
RimX action
Spuhr mount with level (lol)
Razor 6x36 G3
MDT send it
Light in objective
Plumb line and shadow on wall

I leveled Spuhr mount with its bubble. Then flashlight in objective to plumb line shadow on wall. Nothing else levels out.
Put level on scope, mount, or gun everything is canted. I am going with plumb line and gravity.

I do some fine tuning trying to get scope, mount or gun level with bubble and MDT send it stays solid green saying its good () the whole time even as plumb line shadow shows me how crooked the scope is.

I have 2 stocks for sale, both for Rem 700 SA.

1st is a Manners CS with mini chassis with Badger NV bridge installed for the short LPVO scopes and thermal clipons. Works great with the iRay and POT Vudoo S. Selling because I don't use it and enjoy the lighter XLR Mag chassis with NV bridges.

The top of the rail is in line with the scope rail of my TL3 so no height offset unlike my other chassis with bridges

$1200 shipped and insured.


Guns not included, just the stock/chassis. Pictures are to show them installed and can provide any other pictures you want.

Thanks

So I've got a Sandman S already and when I put it on my 12.5, it starts feeling more and more like my 14.5.

My thought is to either buy a 556 specific can (Dead Air is supposed to have one at some point) or get a K can.

Has anyone done a direct thread K can on an 11.5 or 12.5 and regretted it? I shoot with earpro 99% of the time but I don't like a fireball at night. Thoughts?

$340 shipped

Looking for a 2-10 swamp fox warhawk. used is fine. Located in GA

I am considering the Steiner Predator 4 ... specifically the 4-16x44

It is hard to find many comments on this SFP scope

Wondering how the glass compares to scopes like the SFP Razor LHT or the Leupold 5 or 6 HD's

Also, how is the tracking? ... and how do the turrets feel (mushy?)

Durabilty?

It will be going on a Tikka Lite in .308

Hopefully some people out there have experience with this scope

Hey guys, starting to get in to long range AR platforms…… so I went with the IWI Zion SPR… for $1,200 it seemed like a great rifle. My suppressor will be home soon……I upgraded a couple things anticipating suppressor use…. Radian Raptor SD charging handle, geisselie super 42 spring & buffer (H2). Rifle already has an adjustable gas block…. Suppressor is a sure fire RC2… any thoughts on this set up, good start? Any suggestions outside of this setup? Thanks !

6mm ARC
16” 1:7 Ballistic Advantage SPR Barrel
Faxon BCG
Spikes Crusader Lower Receiver
Aero M4E1 Upper Receiver
51Fifty 11.5” Handguard w/ Integrated ARCA
Geissele Super Charging Handle
Timney Impact-AR Trigger
Ambidextrous Safety
B5 Systems P22 Grip
Battle Arms Dev Enhanced Mag Catch
Battle Arms Dev Enhanced Bolt Catch
Battle Arms Dev Enhanced Pins
Strike Ind Enhanced Forward Assisted
Shield Arms Adjustable Gas Block
2A Armament UL Buffer Tube & Castle Nut
MFT Minimalist Stock
Black Multicam Hydrodip
5x 10 Round Magazines
1x 20 Round Magazine

Weighs 6lb 8oz as shown

Barrel is brand new never fired, had a 12.5 on this and decided to go back to a rifle but now decided to sell. Over $1600 to build, will sell for $1200 shipped. Must ship to FFL that accepts shipments from individuals. Payment via discreet Venmo or PayPal.

Ranger Green Big Ass Bag

$100 Shipped

Looking for a Manners LRH inlet for a LP medium action

Let me know if you’ve got one you’d offload. Thanks

We have all DNT Optics and Thermals in Stock at Custom Night Vision. We are the largest DNT Optics distributor in the country. Contact us for LE/MIL discounts or other promos. We carry all models including:

ThermNight Series All-in-One - Thermal & Night Vision Multispectral Scope with Laser Rangefinder and Ballistic Calculator
ThermNight Series - 256
ThermNight Series - 384
ThermNight Series - 640

Hydra Multi-Purpose Thermal - Handheld. Stand Alone and Clip On Scope
Hydra Clip On Series - 256
Hydra Clip On Series - 384
Hydra Clip On Series - 640

Zulu Day/Night Vision Scopes
Zulu 3-12X
Zulu 3-12X LRF
Zulu 5-20X
Zulu 5-20X LRF

We just got a handful of these in stock. PM me to reserve one!

Atlas BT10-LW17 V8 W/ADM-170-S Lever
$200 shipped

For sale Peterson 6.5 PRC brass. I have 300 pcs fired 2-3x's and 100 pcs new (10 of which are primed). Most if not all fired pieces annealed in my AMP. If buyer wants I am glad to make sure all are annealed. New brass $75 per 50, fired brass $45 per 50. Price is delivered. Fired brass will ship in mtm boxes.

I can only ship on Mondays, Fridays, and Saturdays due to my professional life. Payment methods are cash, PP f&f discreet, no notes and please account for fees, and Zelle.

Any questions please dm and thanks in advance.

I have a MDT chucky heavy fill peanut $80 shipped. It has a few marks and would probably wipe off.

Really nice thermal ready for action. 4.5 years warranty left. 100% working condition with all the updates done.
$4900 you pay shipping and insurance if you want it.

Moved to an AXSR and no longer shoot this. The barrel has about 250 rounds on it and about 750 total on the action.

Accuracy International
AT-X Gen 3 FDE
26" 6cm
Full length bridge
Full length rail
Folding hinge kit
Rearden plan B

$4800 shipped

5 rounds @ 100 with factory Hornady 108gr ELD-M

Wanted to give this a whirl but decided to go back to a more traditional stock.

Like new Chisel Machine folding stock for Remington 870 12ga. Comes with the additional 5-round placard, mapul grip, and the ACRO plate in addition to the RMR plate that comes standard. Will ship in original factory box as it came.

NOTE: the ACRO is NOT include nor is it for sale (please don't ask).

$525 shipped for the stock w/magpul grip, 5-round quiver and hardware, RMR and ACRO optic plate

Secret Service Eyes New 6.5mm Semi-Automatic Sniper Rifle​

New 6.5mm Creedmoor rifles would give Secret Service counter-sniper teams valuable extra range, accuracy, and ballistic performance.
JOSEPH TREVITHICK
PUBLISHED MAR 21, 2025 4:39 PM EDT

Zero Gravity 1.7” FDE Mount (34mm). Excellent condition. $265 shipped.

If you don't know anything about them, look here.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-DD RISIII FDE Rail (10.5")
-Lilja 5.56 AR Barrel
-Audere H25 Scope Link Rail
-A.R.M.S. #18 M1A Mount
-Quality Handguard 10.5”-11.25”