Duplicate. Im an idiot.

SOLD


$850 shipped
PP f&f , MO or check would work best for me.

Right handed KMW Sentinel with the Integrated Mounting Block for a short action R700 footprint, KMW bottom metal, Henderson rail, the shorter picatinny rail, and a couple extra LOP spacers.

I bought this used and the previous owner had the IMB machined for trigger clearance. I used it with an ARC archimedes and it was fantastic. The overinsertion tabs on the bottom metal allowed me to cycle the bolt with the magazine resting on a bag.

Selling it because I had to switch to left handed rifles due to an eye injury.

ETA: there are a couple of chips in the molded in finish on the right side of the forend. See last image.

I weighed it with Henderson rail and bottom metal installed: 4.95lb

3 firings each. 2 different lots 200 total

$170 shipped in ammo box.

It has not been annealed since its last firing but has been annealed every firing.

Selling lightly used x ray chassis comes with angled bag rider, tool less LOP, and Area419 10” arca rail. Color is FFE

Asking 550 shipped CONUS
PayPal F&F or G/S but you cover fees

I have the following reloading components to bundle for the buyer:

-49 pieces of 223AI Winchester Brass with mixed firings and loosening primer pockets (good for load development)
-47 pieces of Lapua 223AI brass (mixed 2-3x firings)
-38 pieces of once fired after it's last full prep of 223AI fireformed Winchester brass
-38 pieces of once fired Lake City 223AI brass (now fireformed)
-Redding 223AI bushing full length sizing set (no bushing included)
-Redding Competition 223AI Seating Die

$250 shipped for everything

Up for sale is a Trijicon Accupoint 2.5-10x56 green mil dot reticle. Scope body has some marks and small scuffs but glass is perfect to my eyes. Tritium is just about gone but it could be sent in and replaced. Fiber optics still work excellent. Scope is sitting in seekins 6/4 rings.

Looking to get $350 shipped for scope and rings

Has anyone here got to handle and play with the new Tikka T1X Ace??? What do you guys think of this new T1X? https://www.sako.global/rifle/t1x-ace-target

New never used
$100 shipped

ARC 36mm Xhigh (1
42") MBrace rings. In great shape even after 2 seasons of use. Loved these rings but went to 419 mount for attaching accessories. $150 shipped to lower 48.

How hard is it to disassemble and reassemble?

Garage level stuff or send it out level stuff?

Excellent condition with a 5/8×24 adapter. $150 shipped

Another barrel I’m not using
Carbon six LLC 22 barrel carbon fiber for the Defiance Anti-x, ruckus, classic headspace (double check on defiance website).
22 Creedmoor, 1:8 twist, 20” length, 5/8-24, sendero contour diameter at end of barrel before threading is 0.87”.

Carbon six doesn’t mark their barrels which is weird to me. So I took pics with brass to show it’s for sure headspaced to 22 CM.

Absolutely brand new. Carbon six runs a 6-12 month wait (usually 8-12 months). Get this NOW! Cost of barrels will continue to go up and probably get worse next two years.

NO trades
PPFF, Venmo, Zelle or checks with clearance

$825 obo shipped and insured

Wanting to sell a brand new in the box, sealed magnetospeed V3.

$150 shipped.

I'm getting close to retirement and just getting started.

Hello,

Intent of Post: Learn about L&S Ultra 10X-M3A Scope with M118 Reticle and A.R.M.S throw-lever mount value.

From there I may post it for sale AFTER going through the appropriate channels in the PX.

I was given one of these scopes by a buddy years ago. I understand this scope was used on old M24 setups and guys doing M24 builds may be interested. I’ve seen some that were previously sold on the page.

I don’t really have a use for this scope. What are good resources to learn how to price one? If anyone that has experience with these scopes is willing to see some pictures and point me in the right direction please PM me. Thank you.

Jeff

Multicam, size L (packaging is from a M I bought to use instead). I'm not usually a medium guy, turns out this is just barely too big for me. Ferro's sizing guide is spot on. As new, never even been outside. Final price drop to $175 *SOLD*. Venmo, PPF&F, other methods may be arranged. Please PM any and all communication vs. posting here and opening yourself up to scammers.



For those not familiar, these have a carbon fiber core, so they are very stiff, but still very thin and light. It comes with a velcro loop inner belt that goes through your pants' belt loops, then the outer belt velcros on top. It's great to have your holster, mag pouches, and everything else set up on the outer belt and just slap it on. Here's how I have my other one set up:


Stuff I’m always looking for (whether you want my stuff or not):
APA Tru-Loc scope rings - 30mm .856"
Nightforce C550 ATACR 4-16x42 H59
Nightforce C644 ATACR 4-20x50 MilXT
S&B 4-16x50 cm ccw only, P4F or G2XR
Dillon carbide size/trim dies, 5.56 & 300 BLK
Emerson CQC Folder
L Reg surplus GoreTex

Other stuff I'm selling:
Sig P320 AXG Combat
H&K PSG1 trigger
Misc cleanout

My Desert tech HTI 50 BMG muzzle brake has a thread .

According to Desert tech I can just mount the Elite Iron suppressor onto the muzzle brake.

When I ask Elite Iron they said I should remove the muzzle brake and mount directly onto the barrel.

So my question is: Who is right?

I also watch a video of Desert tech showing them mounting the Elite Iron Alpha on the muzzle brake.

New 3rd generation AndiScan A3 ballistic Doppler radar is available - main features

• smallest form factor on the market, dust and rain resistant, metallic case
• battery operation time: 6 hours, 3 hours in Armed state, can be charged during operation
• 4 measurement ranges covering 1 – 1502 mps
• measures true V0 with high precision
• trigger options – direct signal detection, acoustic, external
• huge internal storage capacity: 1000 files, each file 100 shots
• 10 predefined and fully user-editable configuration profiles
• full remote control and live view by universal Remote Shell App over BLE and USB-serial

Overview and user guide videos are at https://www.youtube.com/@SQi-AndiX
Technical details and features at https://www.sqi-andix.com/andiscan-a3/

XLR Element 3.0 magnesium chassis for a Remington 700 SA. Includes AR buffer tube, Magpul CTR, and Magpul K grip.

$500 shipped

Comparison:​

⭓ 𝐀= Athlon Ares ETR 3-18x50 FFP
vs.
⭓ 𝐁= Bushnell Match Pro ED 3-18x50 FFP


I can compare the specs here.
➠ Please, help me comparing glass and turrets! Thanks!!


Min. Parallax:
𝐀= 10y
𝐁= 12y tested [thanks, Jake!] (15y indicated)
FoV (in ft @100):
𝐀= 39.2-6.7
𝐁= 41.0-6.8

Max. Elevation Adjustment:
𝐀= 30mil
𝐁= 40mil

Reticle Unit of Measurement:
𝐀= in MIL and MOA available
𝐁= only in MIL

Reticle: Thickness of the main line of the cross
𝐀= 0.05 mil
𝐁= 0.06 mil

Weight:
𝐀= 31.4oz (890g)
𝐁= 28.4oz (805g)

OAL:
𝐀= 14.2" (36.6cm)
𝐁= 13.2" (33.5cm)

Elevation Turret Type:
𝐀= exposed elevation
𝐁= exposed, locking elevation

Turret Turn Counter:
𝐀= Turret turn counter (lines)
𝐁= Mechanical turn counter (pop-up pin)
I wonder if the 𝐁 zero stop with the pop-up pin will limit the turret travel to 20mil (instead of allowing the full 40mil)....

Windage Turret:
𝐀= exposed, locking
𝐁= capped, non-locking



How does the glass and the turrets compare?

When is it worth to spend the extra money on the 𝐀?


Thanks!

Matthias



Factory Web Pages:
𝐀=

𝐁=

MPA Competition Side Rails – BA Comp

with Gray Ops side rail and XL side rail weights

Excellent Condition

$250 shipped. SPF

All that is needed is a receiver and trigger. Not ready to split it up yet, give it a week or 2. Was going to become another rifle. Selling to fund a heavy NRL build.
Includes:
-Rock 24 inch 30cal 5r M24 barrel (original barrel contractor)
-Leupold Mark m4 m3 scope with sunshade (late contract scope has mil reticle tracks and works well.)
-Steel mk4 rings (painted/shows finish wear)
-Badger M24 base
-Sunny hill correct bottom metal
-correct m24 follower
-aftermarket mag box
-m24 sling swivels
-correct harris 9-13in smooth leg bipod
-HS precision long action 024 stock, recoil lug pocket was opened for badger recoil lug will not cause accuracy issues or be noticeable.)
-recoil lug

2200 shipped

Login to view embedded media
ATF double doubling down on their FRT honey pot? Or, the real deal?

Dude, blink twice if the ATF is holding you at gunpoint to make this...

New guy from Reno - just moved out here and looking forward to all this wide open space to get some practice in. SCAR 20s in 6.5 is my weapon of choice. Not the most optimal for PRS but I like to practice with what I like to shoot. Still figuring out what optic Im putting on it.

MPA BA Comp Forend Weights

Total of 1.6 lbs

$80 shipped. SPF