Shooting my 22 Creedmoor today in the hot NV desert. I was experiencing terrible, mysterious groups (Oblong holes) and missing shots at 100 yards, but only with Sierra 77gr TMK bullets. Hornady 62-grain ELD-VT bullets shot well. The 85.5gr Bergers did okay. I fireformed some 53gr V-max (22/250) they did fair, but made it to kick up dirt at 300yds.
I never had this problem in the wintertime with these bullets? 8"twist 3,425 FPS. I just bored-scoped the BBL; it needs cleaning, but the Carbon ring was minimal. I was worried that my BBL was shot.

Comes with enhanced bolt/bcg, ergo grip, surefire closed tine war comp, radiant CH. Bought everything new and never shot it. Offloading everything that doesn't get used. Probably wont trade but ill hear offers. One in particular would be a plxc with griffin reticle. $2600

Can come with the nf atacr DM reticle in pics for an additional 1900.

Selling a Tangent Theta 315M 3-15x50 with the Gen3XR FFP Reticle. Comes with Tenebrex scope covers.
Scope only-3400 shipped insured
Scope with .885 NF Ultralight rings w/ level cap-3550 shipped insured
Pm if interested.

Currently running the standard 419 mount on the K540, but needed a little more eye relief as I shoot a short LOP.
Received the 419 mid cantilever yesterday, and noticed the cant portion has some flex as that connection has a relatively thin profile.

Should I be at all concerned? I’m guessing not as the 36mm scope body will add rigidity?
Am I over thinking this?

Flame suit on (in case this is perceived as a newb question).

Great shape. Bought used shot 200rds no problems just scaling down. Factory Romeo gun. Comes with legion coin 3 mags and armory craft magwell


Will be shipped through ship my gun.

No trades
$1000 shipped Pp ff no comments. Apple Pay venmo zelle

Geissele GFR Lower labeled 6mm Arc. Complete from Geissele with the Gfr-E trigger and special stock they use, h2 buffer and these lowers have a spring loaded plunger that pushes up on upper to eliminate wobble.

Lower was never used, but sold the upper.


This can be used in with other calibers as well. Just says 6mm Arc on lower.

$700 shipped to your FFL

PayPal FF, Venmo or Zelle

Holster hanger. Everything you need except the hydra holster. New never used. $50 shipped.

Glock G19
Fobus GL-2ND Paddle OWB $40.00
Kaos Kydex Holder $30.00
Buy both for $50.00 and ship for free.

Complete Sig P365XL slide with True Precision upgraded barrel. Everything bought from Sig. About 200 rounds through it. Paired with the Sig XL grip module. Together 450.00 shipped. Willing sell separately - make offer.
I also have some Tactical Development mag base pads to convert from your standard mags to XL grip. 6 for 12 round mags. 1 for 15 round mag. Let me know if interested and I can sell separately. They are very nice if converting from a standard p365.

286, 292-293, 332
New never used. 10 dollars each. 5 dollars shipping any quantity.
248-250, 336, 338 (SOLD)

I have a like new pair of Athlon Midas g2 uhd pro 12x50 binos with the reticle, has a nice mount for the tripod with a 1/4x 20 thread u can put a wind flag, 380 tyd for everything with the mount

For your consideration! Let me know what you guys think! I really do love this chassis in a ton of ways!

The Matterhorn Chassis by Zermatt Arms | Old meets new in a beautiful way.
Login to view embedded media

I just had to post up about my New TACOPS Green Hornet. Mike built this hammer for me over the past 6 months. I am just now getting the time to let this baby sting. Integrally Suppressed, and accurate as all get out. This rifle will be great at controlling the local tree rat population.
I brought a selection of ammo out to the range today. I was happy to see that it had no problem holding minute of squirrel head with almost anything that it was fed. I scoped it with a USO MR10 and it seems perfect for the job.
I was really happy with the CX and R50. Checkout the SD on the R50! Yep it is going to be a great little hammer. Since I need to conserve the R50 for comps, I was also very happy to see that the Lapua Center X was holding its own. I was running behind, but I had to try a few at 100 yards. Two sighters and 2.5 mils up and it was printing extraordinarily well. I suspect If I had taken my time, those groups would have tightened up substantially.
I can’t Thank Mike for he’s incredible work on my Hornet. Definitely loving this rifle.

IRAYUSA, ILR-1200, Laser Rangefinding Module, Matte Finish , Black, Compatible with BOLT V2 and BOLT SE Series Thermal Rifle Scopes, Included 30mm Clamp Mount. Mounted but never used. Asking $600 $500 shipped. Not interested in trades.

I thought you guys might like this one. This rifle has a lot of historical value to the Marine Sniper program. This is likely the earliest Marine Sniper rifle that still exists.

If you are not aware, the first "official" US sniper rifle was the M1908 Warner Swasey. It was adopted in 1908 by Army Ordnance and was made by Springfield Armory starting later that year. The first production run of rifles, past a couple test rifles, were in the 352xxx and 353xxx serial range.

Basically, the whole premise of the Marine Sniper program started when the Marines decided to buy a handful of these first Army sniper rifles in 1909. This is the first time the Marines had tested an "official Sniper rifle" and from this ground work, it lead to the official Sniper program in 1917.

A neat point about this rifle. This is likely not only the earliest Marine Sniper rifle known, but it's also from the very first block of official Army sniper rifles produced. So it really served as the beginning of the sniper program for both branches.

Originally, the mounts for the Warner Swasey sights were staked on the inside of the receiver by Springfield Armory. Once the Warner Swasey sights became outdated, it was common in the era to remove the mounts and make the Snipers into a standard service rifle. Reading Ordnance docs of the time, they stated the staked screws were hard to remove and it was easier to just cut the mount off the receiver and leave the staked screw heads in place.

Even though I have never found the serial list of the 1909 shipment to the Marines, everything I have ever found leads me to firmly believe this was one of them. They would have for sure been in this serial range. I did find this rifle's serial number on a Marine Document from 1929 but it does not detail on the document if the serial is a SA or RIA number. But the odds are highly in favor that it is my rifle after the mount had been removed and it became a standard service rifle.

Looking at the rifle it has likely been rebuilt several times by the Marines, with the last time during WWII. It is a pretty stereotypical early WWII rebuild with a 1942 Sedgley USMC barrel.

Even though all that still exists of the original 1909 Sniper rifle, is the receiver, it's pretty likely the entire Marine Sniper program started here.

So far, this is the only known Marine Model of 1908 Warner Swasey that exists. There is one in the private collection of the Marine museum, but the receiver isn't original so I imagine it was put together for a display.

I feel very honored to be the caretaker of this rifle, and the legacy it left behind. I just wish this one could talk.

Looking for a factory buttstock for a RPR. Thanks

Tan Kestrel 5700 Elite w/Link and Applied Ballistics. Have box and carrying case. $620 shipped CONUS.

So i need help, I purchased 2 lpa actions. 1 long action ti and 1 steel medium both fuzion both full dlc. I had 2 carbon six barrels made and that's where I'm at 1 7prc amd 1 6.5 max. I inquired with a well know Smith to make me a 7 mega barrel for one of the lpa actions and he refused to make a barrel for lpa. He said they are junk. He said for 300 he could make them to their potential, here are the issue he state and I'm just wondering if it's worth him to fix or try to part of ignore what he said. Here you go. Copied and pasted his comments below

Their shit is generally junk if you want benchrest accuracy consistently
1)I don’t do barrels for lone peak arms Too many things need done for a rifle to shoot to its potential. Especially lone peak ignition systems. 80% need fixed
2) they use too weak of springs
3)Firing pins, cocking pieces binding, inadequate firing pin travel. Weak springs. And their actions are one of the most crooked actions on the custom market. I refuse to build on em anymore
4)Horrible cock on close generally also
5)Proper ignition is crucial for consistent benchrest accuracy. Without it the the gun wont shoot light: out. In big magnums I’ve seen hang fires in cold weather w their actions due to ignition. Fix the ignition and it’s cured.
Remachine certain parts $300 to fix em per action.
I don't want to throw him under the bus so I won't name him unless he says I can

Have 8 bricks all same lot. $175 a brick + shipping, if buying all 8 bricks I'll split shipping.

Prefer either discret paypal (F&F) or can take zelle.

Are you looking for complete, TOP SHELF and turn-key 300 BlackOut Rig? This one is for you.

I built this about 2 years ago. She's been a bedside-safe queen since. Only taken out of the house for indoor range sessions and the occasional road trip when the form 20's were valid.

The upper was listed here before this. I have taken that post down since I have decided to sell the complete setup. Priced very well and ready to sell. You will only need to buy ammo. I have that too! Let's chat.

It is registered as an SBR assembled/manufactured by me. THE LOWER IS ENGRAVED PER ATF Rules. see notes below.

When it sells, I will send the letter to the ATF to remove it from the registry, including a copy of the letter to the buyer. Its typed and ready to go.

I will ship the upper without the stock separately from the lower which will include the CTR stock unattached.

This weapon system is immaculate. Shows minor signs of transport, take down and various mounting and unmounting of accessories.
Just about 200 suppressed rounds on the whole thing.

FOR SALE:
COMPLETE UPPER -

• RAIL: Geissele 9.3" MK8 in DDC color. IT IS A BRAND NEW and NEVER FIRED RAIL. Will ship with the OEM materials.
• UPPER RECEIVER: ADM UIC IN Anodized ODG color. Like new! Shows a couple of tiny blemishes from optic mounting in the rail and takedown and installs for cleaning after each range trip.
• BARREL: 10/5" Criterion Core in 300 Black out. Never pin & welded. No muzzle device. Only ran it suppressed. It has been Bore-tech cleaned and prepped for sale. Shown with thread protector on it.
• GAS BLOCK: Superlative arms adjustable gas block. Will ship with OEM adjustment tool and materials.
• GAS TUBE: Aero Precision Melonited.
• BOLT CARRIER GROUP: Lantac E-BCG. Full Auto Style. Suppressed fire and thorough cleaning resulted in a dulled sheen. Still like new function. Fully stripped, cleaned and oiled for sale.
• CHARGING HANDLE: Geissele Super Charging handle in DDC. Shows normal signs of wear and use. Cleaned after each trip.
• DUST COVER: FCD Single Dimple EPC in ODG. Shows normal use on hinge stops.
• Will not ship in OEM packaging.

COMPLETE LOWER - NOTE: It is engraved with my name and the city of assembly/manufacture from the registration.

• RECEIVER: Matched ADM-UIC lower receiver in Anodized ODG. ADM ambi system.
• SAFETY: Radian Talon ambi safety selector.
• TRIGGER: Geissele Automatics SSA-X Trigger with Lightning Bow.
• BUFFER TUBE: Matched ADM 10 position in Anodized ODG color.
• BUFFER SYSTEM: H2 buffer with spring. System tuned for 50/50 Suppressed fire.
• STOCK: Magpul CTR Stock w/ enhanced butt pad. ships unattached.
• ENDPLATE: Radian QD End-Plate
• GRIP: Magpul K2 XL Grip w/oil bottle.

ACCESSORIES -

• FLASHLIGHT: Modlite PLHv2 FDE Light Body w/ rechargeable OEM battery, charging cable, One Hundred Concepts Cover rattled canned in FDE, T-Rex Arms Light Bar M-Lok Mount, Unity Tactical Hot Button w/7" cable and Arson Machine Picatinny cable strap.
• SLING: Wells-Made Classic Ranger Green Rifle Sling with Rapid Deployment and QD ends.
• SLIING RETENTION: Sentry Strap Sling retention strap
• FORE-GRIP: Samson Manufacturing M-Lok vertical grip in FDE - shows good signs of use.
• SLING MOUNT: BCM QD M-Lok QD sling mount,
• MAGAZINES: Three (3) LANCER 30 round 300 BO magazines (WILL NOT SHIP TO BANNED STATES).
• OTHER: TWO(2) RAILSCALES 3 slot rail covers in dragon skin style.

OVER $2,800 in this build. Likely more if you built it with today's prices!

SELLING PRICE: UPPER PARTED AND SOLD

Accepting PayPal FF, Paypal G&S buyer pays fees, Zelle.

Please feel free to make me an offer if you wish. The worse thing I can say is no.

I am happy to provide additional pics or take a face-time call for proof of life or additional concerns.

NOTE: All required legal steps for the FFL to FFL transfer will be followed.

Magazines will not ship to banned state. No your own state laws!!

Will ship out first thing next biz day after my end of the FFL transfer is completed.

I must secure appropriate packaging from my local Pack-N-Ship and required legal steps to ship via carrier.

PM me first to avoid scammers. I will not PM you. No business in the thread.

I know a batch of these new lapua bullets arrived in the states about a month ago and sold out real fast. Just wondering if anyone on here was able to scoop some up and have been able to do any testing and have any feeeback; take any bullet measurements and how they are shooting? I’m curious how close they are to the Berger 144’s. I’ve heard they are slightly different in shape/dimensions and have a tighter closed meplat. I’ve always liked lapua bullets. Easily the lapua scenars are the most forgiving and accurate bullets I’ve shot but bc has always been lack luster. The scenar L’s are probably the most consistent uniform bullet I’ve seen for weight and dimension. I’m hoping this new 144 has the same pedigree.

Selling a Spuhr 4001 1.18” centerline height mount for 34mm scopes. The mount is in excellent condition and will come as shown.

sold

No trades please.

Hey all,
New guy from Ventura County. Enjoy shooting long range. So far my longest was 1000 yards. Looking to shot farther. Also was looking to sell some 300 prc brass

Brand New in oem packaging
Geissele 14.5" CHF chrome lined heavy barrel
0.75" journal
0.075 gas port
Mid-length
1/2x28

$345 shipped
Paypal gift, Zelle
NO TRADES

Selling factory sealed Sig Kilo10K HD Gen II binos.
$2299 + free shipping in U.S.