Cut for Impact Precision action
6.5 Saum 18 inch Bartlein Rem 700 Sendero/varmint contour #13 I believe. See pics for measurements.
Barrel weighs 3 lbs even.

Averaged 2877 fps with Prime factory ammo with 142 SMK bullet.

I purchased it new off gunbroker from a gunshop that had it spun up by GA Precision for a lightweight hunting build that they never did. I put approximately 200 rounds through it of Prime factory ammo.

$525 shipped lower 48

Please PM me if you want it. I will onlybrespond to your PM. I am happy to send pics with date so you can be sure you are paying correct person. Beware of scammers.

- Keymicro Suppresor adapter 1 1/8-28 thread (Alpha) - $75 Shipped
Moved over to Reardan and don't need anymore, never had any issues.

Have reached out to Bergara but am having trouble getting my hands on a hmr premier/ pro bolt. Wanting to upgrade and replace my hmr bolt.

Let me know if you have one.

Thanks.

Hello,

I am new to reloading and am starting with the basics, but I eventually want to start loading for my 7mm PRC.

I see a lot of people using automatic dispensers that claim to be accurate to 0.1gr for general reloading, but I was curious if those are accurate enough to meet/exceed factory match ammo, and what most people use for handloading for “ELR”. I intend to use h1000, but I am open to recommendations.

I was also looking for die recommendations, I see hornady has some match dies, but wondered what else people are using.

Thanks for the help!

Relocating from the west coast to the east coast.

Put together a quick sale to celebrate a little.

Discount auto applied at check out,
orders placed before March 10th, will go out within 1 business day.
Orders placed after that will ship out on March 20th.


Login to view embedded media

Wtb srs lite but will consider the standard srs if it’s black. Needs to be fixed interface not xtn since i have the folding adapter for fixed interface.

Two lots of bullets for sale, looking to sell as a package.

300 count of lot 2212144 (3 boxes unopened)
264 count of lot 2191820 (1 box unopened, two boxes opened)

$200 shipped to CONUS

New stock. Never mounted. M81 Camo.

$570 shipped

($899.00 as optioned on Grayboe’s page)

Aimpoint ACRO like new with scalarworks mount
$450 shipped

Selling mounts I’m not using:

X2 5/8 non timer SR unused

X1 1/2 non timer SR unused

X2 5/8 CB unused

$125 shipped for each SR

$110 shipped for each CB

Can make a better deal on multiples purchased.

PayPal f&f preferred

Like new condition KRG Whiskey 3 (Gen 6) with enclosed forend for Tikka actions for sale. Full list of what's included:

• KRG Whiskey 3 non-folding chassis for Tikka actions
• Enclosed forend
• ARCA Rail
• Flat Bag Rider (heavy)
• Angled Bag Rider (lightweight)
• 3D-printed flat bag rider (lightweight)
• Fat/lrg grip (installed)
• Thin/med grip (included see pics)
• (2) short pic rail sections
• Sling stud
• Action screws

Looking to sell it all together; this chassis is totally baller and this listing includes most of the accessories available for it; I've managed to get lots of different BAs balanced in this thing and it made for a nice positional gun with a 18" SS barrel in it.

SOLD

Gen 6, no trades, takes CTR or AICS mags (except for Magpul polymer), all in, I don't know what it weighs in this or that configuration and I'm not taking it out of the box again, let's get this done.

Almost new press.
Only loaded around 200 rounds.
Comes with the Abor die conversation kit and a Lee bench plate kit.
Long and short handles.
$260 TYD.

Looking to round out some bits I need. Looking for the following

- 6GT Brass: doesn't need to be new
- 6GT dies: looking for Redding or Hornady (preferred)
- Trigger: going in a Solus action, looking to spend about $100-$150 on a used one

Left handed X95. Less than 60 rounds through it. Purchased and didn’t realize it was left handed. Fail.

$1300 shipped

Selling these off don’t need them anymore

2200ct 75gr ELDM
Wilson Die
KM mandrel .003 tension
180ct Lapua

It all stays together not splitting up

Asking 800$

Looking for. Short action Magpul hunter bottom metal

Have two
One left

$35 each shipped

* SOLD * New, never used. From Adam MacDonald, the maker of the Autotrickler and Shot Marker. Uses microphones to time the shock wave of supersonic bullets, can be set to 2, 6, 10, or 15 feet apart. $99 shipped. * SOLD * Venmo, PPF&F, other methods may be arranged. Please PM any and all communication vs. posting here and opening yourself up to scammers.



Stuff I’m always looking for (whether you want my stuff or not):
S&B 4-16x50 cm ccw only, P4F or G2XR
Factory Sig P320 full-size 1/2-28 threaded barrel
Nightforce C644 ATACR 4-20x50 MilXT
Nightforce C550 ATACR 4-16x42 H59
Emerson CQC Folder
L Reg surplus GoreTex

Other stuff I'm selling:
Sig P320 AXG Combat
Leupold Mk4 12-40x60 P4
TA01 4x32 ACOG
Ferro Concepts Bison belt
LabRadar with bonus!
H&K PSG1 trigger
Timney SCAR 17 trigger
Misc cleanout

Not sure how I missed this...

Well, yeah. Sure. I do know. Was busy doing 'stuff' in the dot com boom. Which was my post-NASA career/Post 'stuff' career.

This HBO series is incredible. Its on HBO now... about 14 hours or so. And I can't give it a better endorsement.

Its rather brilliant. Great cast. The back stories are great. The whole thing is really well done.

The Right Stuff (based on the Tom Wolfe book) is great. This is sort of the sequal.

Sirhr

Looking for steel and carbon fiber 6.5cm M27 barrels compatible with AI AT-X. Black or FDE

Used on one hunting trip. Great shape

$375 shipped

MDT HNT26 chassis. Fits T3 and T3x rifles. All Tikka actions are the same length, but they can run different bottom metal and mags depending on the stock/chassis. This chassis is set up for long action mags. Can use with magnums or short action calibers you want to load long.

New in box. Right hand. Folding. Non Arca. Bought two and only using one. Sold the other rifle.

$1280 shipped

Three unopened long action magazines

$35 per shipped or $90 shipped for all three

$35 shipped for the loose mag, which is made for short action calibers. Same outside dimensions as the long action.

22" Dracos Straight Jacket Barrel. 8T Rifling. Shot really well suppressed and unsuppressed.

Includes gas tube and gas block. Between 100 and 150 rounds through it. Used it coyote hunting.

$375 Shipped

Have a 7 round and 12 round with red plate left. Have a 7 round black.

Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off.

One tor $70
Two for $135
Three for $195