Afternoon folks,

I'm contemplating building another hot rod. This will be more of a resto rod or resto mod, kind of car that I intend to drive. No garage queen. I'm talking about 7k to 10k miles a year.

if this is you, how many miles a year are you driving?

Who are you insured through?

Are you sure you are covered for replacement value in the event of an accident?

Thanks
Bob

Looking to buy one of these, mil reticle.

All,

Those of us with M40A5’s and/or XM-3’s know this suppressor is rare and expensive. They rarely pop up for sale, and when they do the dildo selling it wants some laughable amount for it. So, is there a workaround?

ECCO machine and BSD Fabrication are doing some awesome stuff by utilizing the SureFire (SF) lock ring taken off a Warden Blast Regulator or other SF suppressor. They’re machining the body of the Warden to interface with other modern suppressors set up for HUB attachments, so that those suppressors may be mounted onto current SF muzzle devices/brakes.

My question is can the lock collar from a Warden can be made to adapt/mount another suppressor to the MB762SSAL/RE muzzle device found on the M40A5?

Anyone been down this road yet?

New in box
PP F&F or Venmo. No trades please.

With the current discussions of availability of custom bolt actions, this spawned a thought:
Since one of the big draws in premium REM.700SA bolt actions is the aftermarket support, why are there so few custom semiautos mfgs out there? You can build a Ruger 10/22 clone using zero Ruger parts, and still get phenomenal accuracy and reliability. Kidd is fielding awesome products and sponsoring talented competitors.
People have always said semi’s can’t compete for pure accuracy, yet anyone who has spent time behind one can definitely see the advantages of firing a rifle with instant follow-up and the fact you can shoot a condition, especially at longer distances. AR-15 parts have been adopted by many bolt action chassis, proof in the desirable nature of such modularity.
Dedicated rimfire AR conversion uppers are continuously being refined by the manufacturers, to the point you can tweak and tune many parts of the firing cycle.
Isn’t the rimfire world ready for full customs from a AR-15 platform?

LEFTY TL3 with 22GT and 6GT barrel. 22gt has around 50 rounds down it 6gt is NEW. Action was used one full year on a 6creed before the swap.

$1950 for all shipped to your FFL

Looking for an M27 308win barrel for an AT. Around 20”, something like factory contour. Would like it to be black finished. Let me know what you got

No CF please

I have an L3 PAS-23 MTM-Pi 640px thermal monocular. Basically looks and behaves just like a regular 320px MTM, just with higher resolution. It’s an oldie, but a goodie, so I’m looking for another one.

I loaned mine to a buddy and failed to tell him NOT to point it directly at the SUN(!!). So, now mine has permanent burn-in.

So, if you have a 640px MTM, drop me a line. I have cash or possible trade items.

FS NIB Vortex Viper HD3000 Laser Rangefinder.

Box opened for pictures

$250 Shipped CONUS

I need to buy a new laptop for my small business. I want a windows based computer to run quick books and surfing the internet. I do not need to run any powerful software or anything like that.

I need something very basic for my very limited computer skills. My budget is open but I don't think I need to spend a ton to get what I need. I have been shopping and I honestly can't tell one from the other. Hope to get a few solid recommendation from others that know more than myself.

Thanks

BT65-LW17 CAL Atlas Bipod - with ADM-170-S

I purchased this brand new from EuroOptic. It is lightly used, and when I did use it, I had the legs wrapped.

$225 Shipped CONUS

Im new to reloading and finally working on getting my bench setup. I want to make the best use of my space as this is where I’ll setup new rifles and do all my cleaning. The left wall with outlets is all wood and sturdy so I can mount whatever to it, along the back of the long bench there’s an 8-9” gap due to the pillar so I can build shelving of some sort to take up that empty space as well.

I have a rock chucker I’m planning on only setting up with my ugly priming tool, a Forster coax for everything else and a Henderson trimmer. I want to keep all that stuff on the short bench but I’m not sure if I should hard mount all, none, or somewhere inbetween using something like inline fab stuff. One thing is I’d like to get the rock chucker on a riser and leave the other 2 flat. I can put the scale on the long bench where press movement won’t affect it since I didn’t mount the 2 benches together. Recommendations would be appreciated

Got this from a buddy who inexplicably opened two tins. The ammo is still lacquer sealed and has been in climate control since opened.

I think 50 cents a round is as cheap as it gets online - two cases of 1,080 (each opened) plus several hundred loose rounds.

ETA - one tin minimum to ship or if you want the loose ammo, IIRC it is 600ish, but I'll get a better count soon and round reasonably in the buyers favor.

Actual shipping applies

Hornady 6.5mm .264 147 gr ELD‑Match - 100 Count Box x 20 Boxes - Same Lot - $500 Shipped

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Set of black ACC Elite Dampers.

$60 shipped

I had a friend at a law enforcement agency call me this week wondering about bullets tumbling really bad in a lot of ammo they’d purchased several thousand rounds of for practice ammo. He said they were tumbling at really close distance and the tac guys were getting light baffle strikes. I’m no expert but, figured I could rule out a few things and figure it out and I’m stumped. They’re 62 grain 5.56 cartridges being shot out of rifles that regularly shoot that bullet weight they are 1:7 and 1:8 twist rifles and the bullets showed similar results across multiple rifles a few larue and other high end rifles. They paper tested them and they’re fully keyholing at 7 yards. The guys shooting aren’t dummies by any means. I assumed the bullets were undersized but they’re measuring an average of .2253 (can slightly oversized cause tumbling?) the boat tails are scuffed terrible but I imagine that’s par for mass produced factory fmj. I milled 10 of the bullets in half and everything on the inside appears evenly filled and normal from what I have seen. I don’t have any pride here I’d just like to help these guys out since they’ve purchased a boat load of this stuff, and probably are going to need some reasoning when they send it back or attempt to.

I have two used, but in good condition Area 419 arca clamps to sell. These include the locking pins, asking $100 shipped for the pair. Let me know if you have any questions. Thanks

RH Defiance Deviant GA Hunter, nitrided, Spartan Precision branded
20” bartlien CF M24 1-8x threaded 5/8-34 with a TBAC mb and thread protector for MB thrrads
MDT HNT26 ARCA with full custom red based snake skin Cerakote done by Primal Finish
OBI recoil pad
Trigger Tech primary
Hunting rifle with some truck wear but never abused, under 200 rounds fired
$4500 price drop 4/7 $3,999

Ordered by mistake awhile back. Brand new never used. Think this will fit the ESS as well as the Premier gen 1 but you should double check on the Premier.
Black dampeners

$60 shipped conus

WTB Barrel vise. One that can handle a carbon fiber barrel.

Login to view embedded media
Or that’s what they’d have you believe to justify that they roughed up and arrested a quadriplegic midget because he didn’t show the proper respect .

Look how violent and aggressive he his
while they talked to him outside the garage

And the pig bitch asked him who had custody of him . A grown ass man . .

This course is held at our PRIVATE 62 acre training facility in central MN. Students enjoy our hospitality, from our 2 story timber lodge to our hearty wood-fired meals and beverages...EVERYTHING is included. Our 750 yard range features a beautiful timber classroom, wifi target camera system, tall targets to 10 ft and more....Students will shoot prone, bench, standing supported, and tripod at varied yardages. We limit each rifle class to a max of (6) students, and with multiple instructors, this allows for more individual instruction. Each students get a custom drop chart for their specific rifle/ammunition to 750 yards, as well as a dope book and 13 pages of class handouts. First night includes a 2 hr classroom session. Please note, we have a strict no alcohol policy for our onsite guests. Every class is filmed, and a PRIVATE video is produced 4 weeks post class, allowing the students to retain more of the course, well afterward. To register, go to PointBlankGunTraining.com or call (218) 820-2793 with any questions. Check out our facebook page to see more pictures and video of our training facility.

https://www.springfield-armory.com/1911-ds-series-handguns/1911-ds-prodigy-handguns/









MSRP of $1499

"The Prodigy™ from Springfield Armory takes the proven 1911 platform and enhances it with double-stack capacity and a performance-driven feature set. Reconfigured around a double-stack magazine, the Prodigy’s polymer grip module mounts to its forged steel frame offering capacities of 17+1 and 20+1. Optics ready with an ambidextrous safety and picatinny rail the Prodigy combines the most beloved characteristics of the 1911 with modern capacity for unrivaled performance."

Uses the Agency Arms AOS mounting system.
Has 17, 20 and 26 round mags available.

Mags have a $60 msrp

I'm personally very interested to check this out.

I'm going to regret this. But I bought this with some ideas of competing and in reality they won't happen due to schedules. My summer was supposed to be free but now I'm working every weekend I'm not traveling.

Only looking to trade for something that I'll use for hunting. Seems to be the only time I get out nowadays

Defiance deviant action built by Joe walls
Bix and Andy competition trigger
4 barrels all kreigers:
308 m24 or MTU contour 26" - throated for 185 juggs (500rds)
6 creedmoor rem varmint - 24" (75rds)
6 creedmoor rem varmint 24" (new)
6.5x47 rem varmint 26” (new)
All threaded 5/8"-24
All are cerakoted black
Xlr Element 4.0 w/ MDT grip, bag rider, thumbrest

Still unsure on this, as I may just end up cutting down one of the 6 creed barrels and keeping everything

Would sell for $2400 + half shipping (will be two packages)
I will hold off on selling for two days with preference to trades

Trades:
Custom clone 700 action or tikka
18-22" steel barrel lighter contour
Caliber must have factory ammo availability -6cm to 300wsm preferably

Foundation Gideon
Manners PH w mini or micro chassis
Manners LRH w/ mini or micro chassis