Nigerian Princes need not apply, for everyone else please forward me your info.

Thanks

Sako

I have an almost new SAC scope leveling tool for sale
Sold

Lightly Used DeltaPoint micro for glocks and S&W M&P. Lost the box, but have the manual.

$100 shipped

Hey all, lurked here before many years ago. Really haven’t done much with my firearms for the last few years, but getting back into it. I purchased a Remington 700 AAC-SD .308 a few years back (2014). I had some range trips with it, then kind of sat it in the safe. Pulled it out a few months back, making some basic improvements. Purchase the Magpul Hunter/magazine setup. Would like to buy a new scope, muzzle brake, and a few other items in the future for it, and just hone in my skills…hence joining the forum!

For sale, lightly used AR10 with PSA 18" complete upper, DPMS complete lower (trigger not pictured but is included and installed). Has a cleanly masked rattle can job.

Build works fine, was a bit too much rifle for the kiddo so we're re-homing it for something lighter. $500 shipped to your FFL (half price basically).

Complete rifle for sale. I’ve got a 20″ Ballistic Advantage 8 twist .223 Wylde barrel, on a palmetto upper and lower. Handguard is a B.A.D. Workhorse 15”. It’s got a Geissle SSA-E trigger in it, which is sublime. Hogue grip. Adjustable gas block. 30mm PEPR scope mount can be included for an extra $40 or I also have the PEPR in 1 inch configuration for that price. 20 rd Pmag included. Ready for a scope and she shoots Hornady Superformance 53 grain VMax at sub moa. Perfect coyote gun, just thinking about getting back to a bolt gun. $600 firm, $640 with PEPR. Located in Great Falls, MT.

Trade consideration is a Tikka 223 in 8 twist. Thanks

Outlier Prefit with barrel nut 1:7 twist 26” threaded 5/8 straight contour 6 creedmoor chamber for Tikka t3x. Shoots factory sierra 107 smk around 3150 very well. Several 5/8” 7 shot groups $300 shipped

Apparently when you buy “one” you get two of them in the package.

Take this one for $20 shipped

Zelle- Venmo - PP FF

Looking for a new, or very lightly used (<200rds), barrel for my MRAD. Specifically one chambered in 6.5 or 7PRC. May also consider a 300PRC barrel. Let me know what you have.

Arken EP5 Gen 2 7-35 in mils.
Comes with MK Machining throw lever and bubble level.
$550 shipped
I took these pics to list it for sale, ended up throwing on a 22, decided it’s more scope than I want on it. I can get more pics tonight if needed.

MDT ACC elite long action chassis with all weights, jelly’s, and wings. $1500 OBO

I need your advice guys. The gun is a custom .308 with NF NX8 scope, hawkins rings, manners EH4 stock with élite shell (so there is a carbon fiber shell), defiance action and a 22 bartlein medium profile barrel. It weights around 11 lbs and i kept it reasonably light because I use it for hunting. At the range it shoots amazingly well, from prone and from a bench, with and without bipod. The last three Times i went to the range i was shooting some RWS factory ammo which the rifle shoots regularly in one rugged hole, no joke. Many times when I shoot the third, fourth or fifth round, i can’t literally see the new hole. It’s even difficult to estimate how largenare these groups because you literally don’t see bullet impacts since they are one over the other. BUT, i fired two times in field conditions and the results were bad. The first time i just shot 2 rounds to check zero and they went more than 1 MOA high so today i went at a range in the same mountains where i hunt where you can shoot prone from gravel, thinking it was a good way to try the behaviour of the rifle in a not solid and quite uneven terrain: disaster. Shooting prone, being decently comfortable, i shot around 60 shots and groups opened up from 0.3 to 1.5 moa more or less, with just a single 4 shots group which was 0.4 MOA and a 3 shots group which was 0.5. I tried Leaning bipod legs on a front fixed surface to push them, i tried to load the bipod more and i tried with different rear rests. At the end i noticed that bipod (harris) was digging into the ground resulting in very inconsistent recoil impulse despite my effort to keep the same exact position behind the rifle. Loading the bipod a bit (something i don’t like to do while hunting and which is difficult to do with a harris) helped a bit but groups remained around 1 moa. The spread of the groups was both vertical and lateral, maybe a little bit more vertical but not much so. Then i tried 9 shots in a row from a bench, same identical shooting range and target: 2 fliers and the other 7 shots literally in the same hole, divided into 2 groups which were not in the same exact poi but 1/2 MOA one from the other. The poi didn’t shift much during all the session, remaining centered on my zero overall. The total max spread of all the 60 shots was a little bit more than 2 MOA during all day, considering i switched from prone to bench and including all the “experimental” groups which i did.

1) has this much of an opening of groups to be expected when shooting with the bipod resting on gravel (maybe the worst front test for the bipod) or this change in accuracy has to be due to something else? I am pretty sure that on grass or more consistent dirt results would be better but here in Italy is very difficult to try it. I want to understand if this has to be expected or if this rifle for some reasons is less forgiving in regard to not ideal recoil management due to uneven or yielding terrain
2) a half moa gun, assuming at least that the crosshair doesn’t move on the target, which kind of Max group spread is expected to produce in field conditions, prone and with a bipod resting on gravel or on a similar not consistent surface?
3) I would get better results and less accuracy loss using another bipod (not a harris) with more play in its legs so i can load it and this way the terrain could impact less on the accuracy of the rifle? In this case which are pros and cons of other types of bipods?

I should add that the scope seems not to be the issue (tracks well, never lost zero even despite a solid bang it took the other day), the rifle is reliable and well balanced, all screws are tight to specs and the ammo are of the same lot

Looking for a Triggertech Diamond or Special, single stage with Flat trigger.

Like new original owner

Looking to trade for higher mag mil optics 5-25 and higher

Comes with mount if you don’t want the mount deduct 100 off asking price

1700 shipped insurance on the buyer

Revic PMR 428 Mil scope. Has the internal ballistics and heads up display. Was painted to match AI fde by the member on here i purchased it from. Awesome scope to pair with a night vision clipon since the hud displays what your turret is dialed to.

Fresh pictures tonight.

$2250 for scope
$2500 with mount

This started life as an off the shelf 308, I had the action blueprinted and trued and a Schneider Sendero barrel spun up for it. It bedded in a Manners T4 stock, has a Nightforce 20 MOA rail on top, oversized lug, Badger bottom metal in mini chassis, the bolt work done by LRI and comes with a Timney Calvin Elite trigger. Muzzle is threaded but will not include a muzzle device since I am using my suppressor adapter. I am gonna guess it has less than 200 rounds on it, I know it liked 185s and 175s, gun was a solid shooter. It weighs 10.3 lbs on kitchen scales. I could probably come up with the Redding competition dies and seater if someone was interested in that as well. Asking $OLD shipped to your FFL.

After using my 11.5 for 5 years now with just a T2, I’m looking to add some quality of life at the range and add a 3x magnifier on a QD mount. What’s the consensus on the best 3x magnifier under $400-500? I’m probably ok with spending 3X-C or maybe 3X-P money, but hard for me to justify beyond that unless it’s mind blowing somehow.

I was kinda set on the 3X-C, but just saw the C_DOES review showing the relatively small FOV compared to a Primary Arms so it’s got me rethinking. The Vortex Micro caught my eye at one point because I don’t mind Vortex stuff and it comes with a mount and have seen it all in for $200, but I don’t mind spending more for quality. I run my stocks all the way out and understand these will have poor eye relief so good eye relief would be a bonus.

I’d floated getting a $calarworks to mount the Aimpoint so if there’s a $500-ish package with a mount that makes more sense, let me know.

He’s trumps buddy, just like bondi
Login to view embedded media

Title says it, Crispi Attiva Mid GTX Brown/Orange in men’s size 9. I need a wide apparently, and these don’t fit me right. Walked around my house with them on and had different insoles while doing it, never been outside worn. SOLD shipped PP F&F or you cover fees, most electronic payment and USPS MO accepted.

Missing one of the ring clamp bolts. 2 dollars on website.

$200 shipped

I have a very lightly used Geissele SD-E 2 Stage Match Trigger up for sale with only 100 rounds on it. I will include a set of KNS Precision Anti-Walk pins. These came off of a GAP-10 and have the cut out to fit properly on your Receiver.

Only $200 Shipped.

Login to view embedded media

So after thousands of posts about cops beating up or falsely arresting old lady’s , kids or the mentally disabled- shit that would make any rational person fucking hate them, just cold blooded serial killer shit a REAL dangerous criminal was Finally arrested.

He’s 19 , he’s mentally handicapped- and this sick twisted motherfucker ate expired food with a “THROW AWAY” label affixed . Almost $110 dollars worth .
This is the type of shot that has to be stopped before before things like army’s of military aged male invaders start rapping and killing girls on the street of every American city with virtually NO fear of arrest or prosecution.

Taller by 6 inches younger and known to be 12 miles away when the crime happened BUT a machine told them to arrest this man so they did - without question or hesitation.

Fucking good work boys you’ll have NY back in order in months !

Login to view embedded media
My favorite choppa of all time.

If not for its size, this looks much easier to maintain than the newer Toyota twin - turbocharged 3.4-liter V6 engines.