Up for sale, ColeTac 128 slot ammo novel, never used, fits perfectly any cases between 6mm and 308, such as 6ARC, 6BR, 6 Dasher, 6GT, 6.5 CM, 6CM, 308, etc.

Price: SOLD, shipped to your door.

Acceptable Payment method: PPFF, Venmo, CashApp, all of them discreet (absolutely no comments), or add the 4% fee on top of the listing price.

Items ship next business day.

I am looking for a CDG SA prefit for sale—preferably a low round count. 6.5cm, 6gt, or .308

Up for sale is an Accurate Mag 700 Short Action DBM Trigger Guard, New/Never Used.

Price: $165 Now $130 shipped to your door.

PayPal Friends & Family is preferred for payment to avoid fees on my end. If you want to use traditional PayPal, you'll have to cover all transaction fees (+3%). I’ll also accept Venmo or cash during a face-to-face deal if you would like to meet near Raleigh, NC.

Feel free to PM me with any questions/requests for additional photos you might have.

Thanks for checking out my listing and have a good one! S/F!

Used good condition. Glass is blemish free

$525 shipped

Apple Pay Ppff Venmo zelle

Up for sale, 100 pieces of Hydroformed Lapua 6 Dasher Brass, it has been hydroformed, annealed and FL sized, never loaded, never fired, perfect to fireform in your chamber. One of the pictures shows the difference between this hydroformed brass and a piece that's been fireformed in a chamber (the one with the greenish case rim), once you load and fire in your chamber the brass will conform to your chamber's dimensions. Lot number shown in pictures.

Price: SOLD, shipped to your door. Note: It will ship in a ziploc bag and bubble wrap to protect the brass, it will not ship in the case shown in the pictures.

Acceptable Payment method: PPFF, Venmo, CashApp, all of them discreet (absolutely no comments), or add the 4% fee on top of the listing price.

Items ship next business day.

Up for sale, MPA Brass Catcher, bought it long time ago, lost the second extension arm, but it works wonders the way it is setup.

Price: SOLD, shipped to your door.

Acceptable Payment method: PPFF, Venmo, CashApp, all of them discreet (absolutely no comments), or add the 4% fee on top of the listing price.

Items ship next business day.

AICS 300 WM mags

Prices includes shipping.

If paying by check, it must clear before shipping. I have PayPal and Venmo ,you cover fee if you choose secure PayPal.



One AICS,one Accuratemag

Both 3.715



$45 each or $80 for both SOLD

Borka Tools is pleased to present our new, 2020 model of adjustable torque driver, aka "Borka Torque Driver" (BTD) and a wide variety of BTD based kits in expanded, combo and customer specified configurations.

New kit concept and important features were professionally reviewed by John McQuay from 8541 Tactical, and the version of the kit, shown in the video, is called "BCK-JM":

Login to view embedded media
Here is another (just released) excellent video specifically about 2020 Borka Combo kit, by Ray from X-Ring channel on Youtube. Kit, which is shown in the video, is called "BCK-RH":

Login to view embedded media
Note: Additional information of mostly technical nature is provided at the end of this post.

Here are the main differences from previously run, by Borka Tools, GBs for our products:

1. Participants of the Group Buy will receive 7.5% discount relative to the retail price.

2. Borka Tools will donate another 7.5% of all proceeds from this GB to support Snipers Hide.

Such arrangement lets GB participants to donate 7.5% of their money (received by Borka Tools) to Snipers Hide. I believe it is one of the practical ways to support Snipers Hide, which all of us like to use so much.

Estimated USPS domestic shipping charges are $9-$15, depending upon the size of your order.

Note: This GB is a one-time opportunity for SH members to purchase 2020 BTD kits on beneficial terms.
_____________________________________________________________________________________________________________

How to select your 2020 BTD (Borka Torque Driver) kit:

First, visit our web page, 2020 Borka Tool Kits and Combo Kits to learn details about various kits.

Second, take a look at SH Group Buy 2020 BTD kits prices and availability:

1. BTK-E1, retail is $175, GB price is $162, and $12 will be donated to support SH.

2. BTK-E2, retail is $175, GB price is $162, and $12 will be donated to support SH.

3. BTK-E4, retail is $200, GB price is $185, and $14 will be donated to support SH.

4. BTK-E5, retail is $210, GB price is $194, and $15 will be donated to support SH.

5. BTK-E7, retail is $220, GB price is $203, and $15 will be donated to support SH.

6. BCK-N1, retail is $195, GB price is $180, and $14 will be donated to support SH.

7. BCK-N2, retail is $195, GB price is $180, and $14 will be donated to support SH.

8. BCK-BL, retail is $195, GB price is $180, and $14 will be donated to support SH.

9. BCK-DT, retail is $195, GB price is $180, and $14 will be donated to support SH.

10. BCK-JM, retail is $250, GB price is $231, and $17 will be donated to support SH.

11. BCK-RH, retail is $280, GB price is $259, and $19 will be donated to support SH.

Other options, available for this GB:

A. Order custom BTD based kit, with inclusion of available accessories from various kits.
GB discount (7.5%) and your donation by Borka Tools to SH (7.5%) will be calculated and applied.

B. Order MCR along with BTD kit, retail is $50, GB price is $50, and $3 will be donated to website.

C. Order UTK along with BTD kit, retail is $30, GB price is $30, and $2 will be donated to website.

Link to information, which is related to options B and C: Firearms maintenance tools
_____________________________________________________________________________________________________________

If you're interested, send an e-mail with a subject line "SH Group Buy" (very important!) to:

[email protected]

and include this information:

1. Your SH forums name
2. What you want to order
3. Your full name and shipping address
4. Prefered method of payment (PayPal, CC, USPS money order)

I will quote your kit(s), reply and send PayPal payment request to your e-mail. If you have PayPal account, you know what to do. If not, just choose payment request option to send money using your credit or debit card; PayPal will then act as just a credit or debit card processing company.

Borka Tools ships orders to the valid U.S. addresses only.

GB orders will be shipped in 2-4 business days after payment is received. By the end of day when your order was shipped, you will receive shipping notification with USPS tracking #, automatically generated
and sent by PayPal. If you paid by USPS money order, tracking # will be e-mailed to you by Borka Tools.

Avoid using PMs for GB communications. I have to keep everything related to SH GB in one place,
and my business e-mail database is a convenient place to keep all GB business records.

Your feedback is important for all kinds of reasons, please post it in this thread.

Best wishes to everybody,

Boris
Borka Tools

P.S. Another SH thread, related to this Group Buy: New 2020 Borka kits

****************************************************************************************************************************

Additional information:

2020 Borka Torque Driver (BTD) design is different from our 2015 adjustable torque driver (ATD) design. Instead of "break-over" torque tool design concept of ATD and our original MTD (Multi Torque driver), BTD utilizes our new very unique design (patent pending), which provides better ergonomics, accuracy and consistency of BTD in comparison to ATD. Method of torque adjustment remains the same and there are barely any weight and dimensional differences between BTD and ATD. The main design difference is that BTD has no pivoting handle. BTD utilizes short stroke crossbar, which, when desired torque value is reached, slides 1/8" in the direction of torque application and generates an easily detectable sound "click". When torque tool "clicks", it is very certain that torque tool performed just one complete cycle of torque application. When torque tool "slips" without generating any "click", it is a very different story.

Another change, related to BTD, is the implementation of the highly practical and very easy to use torque adjustment range from 10 inch-lbs. to 70 inch-lbs. And if there is a need for torque application of less than 10 inch-lbs. or more than 70 inch-lbs., BTD kit can include Borka Tools PTL (Precision Torque Limiter), for example PTL0004 (4 inch-lbs.) for NF ZeroStop turret screws or PTL0100 (100 inch-lbs.) for some of the NF scope mounts crossbolts, or even both of these PTLs. PTL0080 (80 inch-lbs.) for DT SRS/HTI/MDR barrel changes and PTL0090 (90 inch-lbs.) for ARC Barloc are also available. As the result, you always have an option to configure your Borka Combo Kit (BCK) so that it will work for many different applications. When PTL is integrated into BCK, it will cost less in comparison to the same PTL, purchased as a separate item.

Borka Torque Driver (BTD) and Cleaning Rods (ECR and MCR) are made in the U.S.A. by Borka Tools and Pro-Shot Products. Accessories, such as bits sets, sockets, extensions, ratchets and Maxpedition pouches are custom made in Taiwan. All our kits, without exception, are assembled and quality controlled in the U.S.A.

FYI, Maxpedition pouch, which we use for BTD kits, is a very slightly modified Maxpedition E.D.C. Pocket Organizer (manufacturer item # 0246), and it is readily available for purchase from many online retailers. This pouch is suitable for packaging of currently available and future combo and custom kits. Our custom TAB GEAR pouch is more compact and works well for selected kits having mostly fixed configurations.

Take note that our latest BTD design is fully expected to remain the same for the next 15+ years.
*****************************************************************************************************************************

Anyone shooting the 175eldx in their 280 or 280ai? Is your 280 throated for bullets this long or are you jamming them way down in the case? I have a few loaded to run over the chronograph. I am shooting them at the charge weight I settled for 185rdfs with 4000mr just to get an idea of velocity. The ones I loaded are with 4000mr but I will be working up with h4831sc or/and 7977 also. I guess I have rl26 also I could try. Mine is throated pretty well for 162s, not so much for really long 7mm bullets but I hate to mess with it because it shoots really well with basically everything I put in it. 139-185 so far, but I am sure I am giving up some velocity with the heavey bullets.

Looking to buy Barrett MRAD in 6.5 Creedmoor.

Will consider MRAD in 300 PRC as I can buy extra barrel.

Later models only.

Selling this bag, it’s barely been used, have a game changer I prefer.

Price is $45 shipped CONUS

Post your fav rifles in 2/23.

Rem 700 SPS Tactical

Edgewood “Tall Boy” with Slick ears 3/8
Sold shipped

Edgewood “Shorty” with Slick ears 3/8
Sold shipped

Warhorse Clede Grey sold shipped

Armageddon Gear Python Multicam sold shipped

Armageddon Gear Schmedium Grey Sold shipped

Accuracy 1st bag Tan (2) sold shipped

mint condition scar 16s. Has about 3 mags through. Also have a mototech 3 position gas plug that ill include with it (adverse, normal, suppressed settings). EOTECH not included

$2600 shipped

1 BNIB Hawkins 1 piece tactical mount, 1.5 0MOA 36mm - $275 shipped or trade value 325
1 Used Hawkins mount on my comp guns 1.5 0MOA 36mm 250 shipped or trade value 300


looking for barrel blanks, preferably a Heavy/mediumish varmint profile in 6.5 or stuff that will fit a Desert Tech SRSA1 left hand.

Also looking for AR308 barrels in 6.5mm approx 16 inches.

don't even come at me with any aero precision or ballistic advantage nonsense.

Also trade for 35mm mounts, or 34mm mounts in like condition from Badger

Just wondering if any hide members have velocity numbers from chronograph on 95 grain Berger classic hunter and Hornady 103 eld x factory loads out on an 18 inch barrel. Need it for my ballistic data on my new thermal, I currently don’t have access to a chronograph. I plan on getting one after the new year sometime but would like this info to get started. Also I’m running a suppressor also, Deadair nomad L. Thank you

This is only pictures and a comparison. There are tons of durability reviews if you do a search.

MicroBest is the OEM for many big name manufacturers. BCM, SOLGW, etc. They offer a bunch of configurations in a handful of finishes. This is the all chrome, C158 variant. It also comes in Phosphate and Nitride. The chrome option is available with different material extractors and gas keys as well as unique fasteners and Sprinco springs. These carriers run anywhere from $90 in phosphate up to $165+ in chrome with different options.

This is the base MicroBest chrome finish with C158 bolt BCG and I planned on installing Sprinco extractor spring and gas rings. When I took it apart I found a 5 coil CS spring and heavy gas rings. I believe they are Sprinco but the BCG was not listed as containing such and I can't prove they are Sprinco. I did not change them as a result. I paid $118 shipped to my door.

I have a Brownells chrome BCG that I purchased last year. I do not believe it is made by MicroBest. It was listed as having a 9310 bolt. The markings are lasered instead of engraved like MicroBest. The original extractor spring and rings were pretty soft so I changed them to Sprinco. I paid $90 for the Brownells BCG, they are now listed for $120. I would choose the MicroBest over the Brownells but there is nothing wrong with the Brownells and will continue using it. The Brownells BCG has maybe 150 rounds on it.

The last picture is a bolt face comparison of the Brownells BCG, MicroBest BCG, and a no-name BCG I bought for $40 five or six years ago. The no-name part is likely Chinese; it is out of spec in every way possible. You can see how bad it is with the naked eye looking at the lugs alone.

I believe the MicroBest branded BCGs to be the best value options on the market today. I have been using their phosphate BCG's for many years. The chrome options are the sweet spot for quality, finish, and value. Everything you need, nothing you don't. If you do a web search for "chrome microbest bcg" you get tons of options at very good prices. I hope this helps.

I can't insert pictures, only add them. The MicroBest is all chrome and new, the Brownells has phosphate fasteners and is used.

Up for sale is a stocky stock lightweight carbon fiber stock for a short action Howa 1500. The stock has been bedded by professionally by a local smith. Has a small ACRA rail. $300 shipped
The stock is like maybe 100 rounds on it. Nothing wrong with it

Thanks
Airborne

Used very little, all in good condition, price includes shipping in CONUS. PPFF or Zelle.

1. Hornady 45 Colt 3 Die Set Titanium Nitride - $40.00
2. Redding 45 Colt/454 Casull 3 Die Set Titanium Carbide - $60.00
3. Reding Profile Crimp - Series A 45 Colt/454 Casull - $25.00

Seekins low 34mm rings
$90 $80 shipped

FS brux 25 cal 1-7 twist heavy varmint barrel. Brought it but not going to be using it

Like new. Fits Schmidt & Bender 3-20x50 and 5-20x50.

SOLD

I bought these but never reallyended up using them. They have sat it my safe taking up space. As you can see, not a mark on them anywhere, and they come in the box with everything. Asking $1300 OBO, no trades.

Looking for a MPA BA Chassis to fit R700 SA. It's going to get Cerakoted, so I wouldn't mind some wear and tear for a lower price. Let me know what you've got!