Im sure it's been covered in threads but after a ton of research I couldnt find a thread that covered WHAT exactly to file away.

Hopefully this helps those who are going to run the krg impact action combo.

This little ridge around the screw is what needed to be reduced. As well as a low profile screw head, which I just filed down as well


Using a small, flexible file I slowly started to reduce that lip. Of course it helps to tape off the surrounding areas to avoid unwanted filing.

After a few hours of filing and checking the trigger hanger clearance I finally got enough material removed. I did test this without the front trigger hanger screw installed.


I went to the local hardware store to match threads and bought a couple spares. Took them home and filed down one of them to be low profile. It now sits flush without any wobble from the hanger or screw.

Selling custom desiccant boxes for Magpul DAKA Grid equipped cases. Boxes take up 4 squares and use rechargeable color indicating beads. Keep your gear moisture free inside magpul, pelican and any other DAKA Grid equipped case. Tight fitting lid keeps beads contained.

Price is $18 each, shipped.

Selling my great condition tripods. I have the following available:

Vortex Radian Carbon Tripod with Ball Head - great condition, some sticker residue on the legs. Ships with spiked feet and Vortex tripod tool+Allen wrenches - $450. Tripod sold

Vortex Switchback Carbon tripod with ball head. Ships with carrying case, manual, tool/wrenches and spiked feet. $325. Sold

Leofoto SO-362CX Inverted Carbon Fiber tripod with Vortex Leveling head. Ships with carrying case, head attachments and tools. $450. Leveling head sold, Tripod available with Vortex Ball head, pics added tripod Sold

Vortex Radian Ball Head still available

All prices include shipping/insurance to CONUS. I accept Paypal G&S +3.5%, Paypal F&F, Zelle, Venmo, USPS Money Order or cash FTF in central Arkansas.

$7500

ARNVGS- Gen lll thin filmed Elbits
2500+ FOM
31+ SNR
1 spot in left tube on the perimeter can see in pics
Have spec sheets and warranty card from
-STEEL INDUSTRIES-
About 5 ish hours of run time.

$7500- OBO

Possible trades plus cash depending.

Finally figured it out. I was wondering why my bolt was hard to close after 3 firings and neck only die. I thought that bullet was too far out but it wasn’t. Also the headspace gauge/ Rcbs precision mic read 3 lines before zero. Meaning headspace is a touch smaller than spec. So why was it still hard to close.

So I took the plunger and firing pin off my bolt to see if after doing all my prep and neck sizing if it still did this. And yes it does not close easily. I decided to use my fl die with out the decapper and ball as I already use the lee collet neck die.

I put lube then put through die then cleaned and tried in rifle and this time it closed easily. I checked the Rcbs mic again and once again the measurement as on the same spot. It did not move. It seems the reason it was difficult to close bolt was because the body had gotten larger and once in fl die it shrank it to proper specs.

I had thought that measuring headspace also measured the body of the case. Shouldn’t the headspace grow taller if the body is pushed in??

I am really having hard time setting up my fl die and is why I gravitated to the neck die. When I use the fl die I notice that at times the head space measure ment is not always the same. Sometimes i have to screw in the fl die and make adjustments so that the headspace is smaller. When we fire the rifle the case conforms to the chamber. The chamber does not get larger or shrink. Why is the fl die not consistent. I make sure I have same amount of lube and same pressure on the press. But sometimes I notice there are cases that is hard to press and some are easier.

Basically I have to measure headspace of each case every time out of the fl die only when I feel a different resistant on the press.

Is this all normal. When I buy a box of Lapua brass and once fire the case and put through my fl die each brass may stretch differently I may have to measure each and adjust die each time.

Looking for Revic Exo Peep sight for upcoming hunt. Message me if you have one available

This sat on an AR of mine in the safe for 99% of its life. Nice little scope, my eyes just suck anymore and I can’t see a damn thing with a 12x scope at the ranges I like to shoot at so I put a 3-18 on it. One small mark on the bottom of the objective. Otherwise I can’t find any flaws.

Come with a brownells 0MOA. Leveled, Tq’d to spec, and ready to bolt on. I take PP and Venmo but my credit union doesn’t do Zelle.

375 shipped.

SOLD to sidetoss20

MDT Ckye-Pod gen2 single pull standard. Near new condition. BTC clamp.

$550 shipped TYD. Price is firm.

300 rounds on it. 20 MOA Rail, Black hourglass knob.

Sold..). If this doesn't work out, I will sell. If you are interested in buying, send me a message.

Obviously will be shipping to FFLs...

Well cared for XDm, less than 400 rounds on it. Comes with 2 holsters, 6 - 15rd mags, adjustable back straps and factory case. Will only ship to FFL

$550.00 shipped

New Safariland Glock red dot RH holster with QLS. Molle fork also included.
7365RDS-8325-831

$225 $200 shipped.

I've got several of these Tangoinnos Fire 4000 Ballistic Rangefinders for sale in black only.
$1250 Shipped CONUS
NO TRADES...............

Selling a set of Zeiss binos. 10x42. Victory FL. Comes with case. The left ob lense has a tiny mark. You can barely see it under a light, and it won't photograph. Not at all noticeable when viewing. $900 OBO shipped.

MPA BA Comp chassis
Remington 700/clones
Short action
NRA Blue
Includes action bolts

$800 shipped
PayPal f&f, Zelle, or Venmo

For sale is an Aero Solus 17" Chassis in FDE.

It has a few of add-ons:

• Night Vision bridge
• Spigot
• Wiebad Cheek Riser pad

It has a couple of modifications:

• Some material removed from the inlet to allow for a CDG trigger hanger.
• The lower portion of the cheek riser adjustment to allow for tool-less removal of the cheek riser (ease of cleaning).

Asking $SOLD shipped

Nightforce ATACR 4-16x42, Zero-stop, model C552. Has only been shot on a custom 6.5CM Sig Cross for less than 100 rounds. Only blemish are the ring marks from A419 raw aluminum on the scope body. Glass is perfect. Comes with scope caps. Original box included. Asking $1675 shipped and insured with signature upon delivery.

I don't hear much about them here. They are about the same price as a Craddock RTR or WOA. How do they compare though?

Looking 200 - 300 brass. Thanks

pretty remarkable realism

For sale: Primary Arms SLX 1x Microprism ACSS Gemini for sale

Price: $140

I accept PayPal Friends and Family, USPS Postal Money Orders and checks for this one. Please see my feedback, many happy customers.

SOLD


Vision Pro Chassis (Carbon gray)
Top Cover
1x receiver bolts
3x pair Vision external weights
5x internal weights (full set)
2x thumb rest
1x forward thumb rest
?x extra hardware

Set up would cost $2525

$old shipped/insured via UPS
Zelle/Venmo/PP F&F

Due to scammers, please PM first before commenting publicly

Looking for something sub $1k with a 30mm tube, FFP, 24-30 top magnification. Already have a couple NX8’s like them but don’t want to spend that kind of money. Want to swap out an old VX3 8-25 target scope on a 6br but want to use the Kelby rings it’s mounted in. Looking at the Athlon Ares gen3, but looking for suggestions.

Terrapin X with gray ops mount.

$900 shipped. Good condition

National Health Care Fraud Takedown 324 Defendants

I’ve been talking about Medicare and Medicaid fraud for the better part of the last 4 decades once I learned about it.

Easy big money for criminals who are good at working with bureaucracies, which brings no surprise that many of the perpetrators are Russians.

They’ve been stealing entitlements moneys by the billions via corporate structures and buying up medical supply companies, making false claims, fomenting the opioid epidemic, while actual people who needed the services get delayed or denied.

This is one of the only good moves I’ve seen from the DOJ in a long time, as I’m one of their biggest critics.

Looks like new leadership finally had some consequences.