Brand new sealed
Berger 6.5 AR Hybrid bullets 130G
2 brand new boxes of 500
1 box of 250
$230 shipped per box of 500 bullets
$120 shipped for box of 250 bullets
Or $555 shipped for all 750 bullets
Thanks for looking
Cross listed

Fury range finding binos with applied ballistics. Brand new, still sealed

$1,100 shipped and insured firm

Nightforce CFS 6-36x50 Spotting Scope w/MIL-XT Reticle & Accessory Cage Kit C696 $3,100.00
Open Box Nightforce CFS 6-36x50 Spotting Scope w/MIL-XT Reticle & Accessory Cage Kit C696 $2,700.00



The Configurable Field Spotting Scope (CFS) 6-36x50mm F1 was designed with practical field use in mind, with an emphasis on balanced ergonomics, flexible configurations, and refined optical quality, while maintaining the ruggedness Nightforce is known for.

This first focal plane spotting scope features reticles that are adapted from the most popular riflescope reticles. The field-ready nature of the CFS 6-36 is reflected in the streamlined, compact, and straight design, which allows for convenient, snag-free storage and transport in, or on, a pack. The rubber knurling, 120° travel, and central location of the user controls aid in quick adjustments, while minimizing unnecessary movement and maintaining stability.

Designed with configurability in mind, the Spotting Scope Accessory Cage and Spotting Scope Accessory Platform (s-RAP) provide reliable platforms for attaching thermals, night vision, red dots, laser rangefinders, data cards, and other devices, making the CFS 6-36 ideal for the professional user.

More reticle information here: https://www.nightforceoptics.com/technology/reticles/mil-xts/

Up for sale is my Marathon 46mm CSAR®Type II - Diver's Automatic. I bought this in June/2024 and although it has seen some use, it was not a daily wearer for me. There are some signs of wear (minor) on the buckle of the rubber strap, but that’s about it. Rugged, and dependable it is a serious watch for serious operators. A big chunk of steel that wears like a much smaller watch, fashionable in the field or at the Golf Club. It can be worn both casual and dressed.

Includes Stainless Steel Bracelet (never installed), 3-PieceRubber Strap Kit with brushed steel hardware (installed) and Nylon Defstan Strap (never installed). As an added bonus, it also includes a Marathon logoed LeathermanFree®T2 Multi-tool and a Marathon logoed Black Canvas Watch Roll. All original boxes, paperwork, etc. included. This complete package at retail would be over $5,300

Not looking for trades, and I will cover shipping/insurance in CONUS. $2,900 firm, PPFF or Zelle preferred but other payment arrangements can be discussed. Feel free to ask any questions! Thanks!

Who Is Marathon?

The U.S. military requisitions Marathon watches. Marathon is a major supplier of timepieces to the U.S. military, with contracts to multiple branches and special operations units. While not ubiquitous, Marathon watches are standard issue for various units across the Army, Navy, Marine Corps, and Air Force, for units like the U.S. Navy EOD, U.S. Air Force Pararescue, and U.S. Army Special Forces.

Marathon watches are also used by other government agencies, including the Coast Guard, NASA, and the Canadian Armed Forces.

The 46mm Jumbo Diver/Pilot's Automatic Chronograph (CSAR) is commonly known as the Chronograph Search and Rescue (CSAR) and is the most coveted of our SAR Class. It is considered the "Grail" of our watches and is the perfect choice for those who demand the best in quality and performance.

More information can be found here:

Marathon Watch Company - Swiss Made Authentic Military Watches

Different types of 308 match ammo and subs. I will get a total count when I get home this week and update the post. As of right now I’m estimating between 400-500 rounds total. The loose stuff in the can in 180-200 rounds of Hornady black.

$400 shipped. Puts you at $1 per round or less if there’s more than 400 rounds there.

.

Precision Delta 147g fmj 9mm bullets.
Brand new factory sealed boxes of 1000 X 2
$220 shipped for all 2000
Thanks for looking
Cross listed

$200 Shipped

1.54"
34mm
0 MOA
Tano
Includes 30mm Delrin ring reducers.

NO TRADES

Forster Bench Rest Ultra Micrometer Seater Die for 6mm Dasher
-seated less than 100 rds
-comes with package and instructions
-$80 shipped

Rcbs Chargemaster Link -SOLD
-less the 250 charges
-comes in box with everything from factory
- switched to IG system
- $215 shipped

PayPal Goods & Services I'll cover the fee. No Notes!

Will ship UPS same or next business day.

Can send whatever pics are needed and do a phone call or FaceTime if needed for buyer comfort.

Please comment here and then pm me.

I will not PM you first






View attachment IMG_1635.jpeg

Looking to get a TT525 or ZC527 in good condition, only from experienced users with timestamps.

So, like most people here are doing, you are carrying a folding knife as part of your regular EDC, right? Doesn't matter if they are passive swivel types, slick assisted openers, or automatics, they are simply the best choice for complete concealability.

Yeah, yeah, I get it. They have belt clips built into them. But the clips on many models, even high end knives, are not exactly reliable on the long run and I know many people who have lost knives and flashlights relying on the clip alone. One of my fellow contractors had his brand new Fenix PD35 TAC light wiggle loose from it's clip and drop over 3 stories from a rooftop HVAC unit we were working on and it's headcase shatter completely. He ordered a new one and I reminded him to get a Fenix hardshell holster for it as well. I actually gave him one of mine because I have a shitload of them and it doesn't hurt to have a few extras on standby... And clips still stand out and anybody trying really hard will notice that you are carrying a knife.

Pockets, especially dominant hand side pants pockets, are the best way to carry a folder for fast deployment if need be. But that presents it's own set of problems. One, a heavy duty folder continuously riding around in your pocket is going to wear a hole right through them after a while. And two, they are loose inside, which means they can settle horizontally into the bottom of your pocket and that makes reaching for it a bit awkward, especially if your work pants have just been freshly laundered and are a bit tight.

Well, that is not a problem anymore.

INTRODUCING: THE REVOLUTIONARY POCKET PROTECTOR. Nah, just kidding. It is just an ordinary faux-leather smartphone and passport/ID top opening wallet that you can get at any discount store. Remove any of the partitions inside normally set aside for IDs and such because you are not using it as an ID case, shear off any top straps if they have any. Then take one of those cheapo nylon drawstring bookbags, cut a nice big piece of fabric out of it, fold it up tight and press it into the bottom of the "holster" to beef up the bottom a bit, and now you got a perfect inside the pants pocket carrier for your heavy duty knife.



The carrier keeps your pockets from wearing out. No more ruined work pants.

The additional bulk of the carrier expands your pocket a bit, and makes reaching into it much easier too.

The added tension and smaller space in the carrier also keeps that folder upright all the time with the swivel end down. You can be assured that thing is always in the position for instant drawing.

And on top of all that, these things are cheap. If they get buffed up and worn to tatters over time, simply get a new one...

This is my SOG Seal XR, a beast of a folding combat knife, inside my ad hoc pocket carrier which is around $2.50 or so and takes about 2 minutes to modify.

#PocketLivesMatter

Hey Everyone,

I am having some trouble sorting out correct buffer spring and weight.

Can anyone point me to a good troubleshooting thread or resource?

I have a 10.5, pistol gas, 300BO. I started with a carbine buffer and spring and had short stroking trouble. At the advice of a LGS, I replaced the carbine buffer with an H3. It still short strokes. Brass ejects but it doesn't pick up another round.

I also have an 18 inch, rifle gas, .223 Wylde that had the same problem.

What do you all recommend?

Thanks

I have a couple of 70 series pistols that need some work (barrel fitting / fit slide stop, mag catch / RMS cut on an existing BoMar) and a second that just needs an RMS cut (Novak).

Nighthawk says 6 months and $1500 for the first one (I supply the barrel). $450 for the second slide cut; but in both cases they only want to cold blue unless they can refinish the whole slide.

Anyone have any recommendations for someone that is going to do at least as well as Nighthawk and be faster?

Anyone have a recommendation for someone to simply cut the second slide? I have seen DSC mentioned here and there - any other recommendations?


TIA

I have a bergara bmr 22LR. FOR a couple years. When I got it I installed a triggertech primary on it and she has performed flawlessly for over a year or longer. Couple weeks ago I installed a TT DIAMOND in it , and once in, the trigger would not reset when I cycled the bolt. I removed the TT DIAMOND and put the TT PRIMARY back into it. That is the same trigger that worked flawlessy for a long while and now it’s doing the same thing. It seemed like if I unscrew the action screws a little loose then it will reset the trigger a bit better but now 100%. Would anybody know the cause of this? Could it be due to the stock not being pillar bedded and action screws squeezing a little too much?
(Both trigger worked well this same day when installed in my HMR PRO)

Fuck the Saudis.

Video: World's first hotel for camels in Saudi Arabia​

https://www.siasat.com › Middle East



Jan 10, 2022 — Saudi Arabia is home to the first hotel in the world to serve and comfort camels. The hotel, called Tatman, includes 120 hotel rooms.

Custom made-to-order cheek spacer for any stock with KMW Loggerhead hardware (McMillan, Manners, Foundation, etc.).

This spacer fits onto the two bolts of the KMW Loggerhead, filling up the space between the stock and the cheek piece with the hardware installed. Simply measure the gap between the bottom of the cheek piece down to the top of the stock and send me that measurement to the nearest 0.01”... Having a spacer made to your exact dimensions will allow you to remove the cheek piece and return it to the exact same location, whether that’s for bolt removal, barrel cleaning, or you have another shooter with a different height preference.



Features:

• Made to order height (nearest .01”)
• Relief for the WieBad Stock Pad straps
• Wide bottom covers holes and gaps from KMW hardware
• Made of durable ASA polymer
• Available in Black, FDE, Grey (similar to Sniper Grey), and Green (similar to Multicam Green)

$30 each shipped. Payment accepted via Paypal/Zelle/Money order
$20 for additional spacers with the same order.

100% satisfaction guaranteed.

Zermatt Bighorn Arms TL3 Action Proof Comp 26" Prefit in 6mm Dasher With TT Diamond Trigger and ACE Stainless Brake ........Everything Else is Sold so ONLY the BA with Brake and Trigger is left .........SOLDShipped

Trying to scam OkayshooterSK2

Hello all, new arrival from Texas. Working on a personal goal of banging steel at a mile before I hit 60!

Been a new but not new member for a short while. I was originally on here in the early-ish 2000s but kinda dropped off and all my original info was lost. Anyway, Nice to be here.

EDC x9 3.25 inch barrel it’s been fired 120 times comes with everything in the picture the box is the original box it came in $2200 obo.price drop $1800.

Excellent condition, buffer/spring are unused & included in box.

$750 shipped
Zelle for payment

I am looking for a RH firing pin assembly for an AXSR.

Mounted and decided it wasn’t my cup of tea. $145 shipped OBO.