Swarovski slc 15x56 with arca adaptor for tripod. Used. Perfect glass. 1575$ shipped.

Good afternoon, Members!

Below is an updated list of the remaining firearms I have for sale.

I've again added more firearms to the list. Two nice HK AR builds, a custom engraved S&W .44 and a S&W Air Lite 360PD .357, two lever action Brownings and a Citori, and a Christensen Arms 7mm hunting build.

Please reach out to me for photos and further information regarding any of the items.

UPPERS

Daniel Defense DD5V1 7.62
Complete Upper
16 Inch Barrell
Keymod
$1000


BOLT ACTION/LEVER ACTION

Christensen Arms Carbon One Extreme
7mm Rem Mag
6.5 LBS
26” carbon fiber match grade Shilen lined barrel
Adjustable Timmy Trigger
Proprietary carbon fiber stock w/graphite bedding block
Skeletonized bolt
Enhanced extractor
Limbsaver recoil pad
Swagger hunter 29 series bipod
SilencerCo suppressor adapter
Swarovski Z6i 5-30x50P HD Illuminated Plex Reticle w/ aluminum lens covers
MSRP: $5500 Build
$3500

Ed Brown Custom
300 WM
26” Barrel
Sub MOA guarantee
MSRP: $4000
$2500

Colt Cooper-Commissioned M2012 Bolt Action
.308 Win
22” custom fluted match grade threaded barrel
Cooper Arms repeater action with integral picatinny rail
3-lug bolt
Timney single stag adjustable trigger
Wood stock
Sub MOA guarantee
MSRP $2500
$1750

BROWNING ARMS MODEL 1886 HIGH GRADE LEVER ACTION
45-70 Govt
Limited Edition 1 of 3000
This is a High Grade Browning model 1886 Carbine, a reproduction of the original Winchester which was designed by John Browning. This modern reproduction has the same action and was produced as a limited edition with only 3,000 High Grade rifles. This would also make a nice hunting rifle that could take just about any game in North America, but would probably make a better safe queen in its high condition and given that only 3,000 were made. Last one sold at auction for $3775.
$3500

Browning Citori 725 Field O/U Shotgun
12G
3” and 2 3/4” shells
7.5 LBS
28” polished blue barrel
Oil Finish
Grade II/III checkered walnut
Engraved silver nitride low profile steel receiver
Chrome plated chamber
Ivory bead front sight
Mechanical gold plated alloy trigger
Inflex recoil pad
MSRP: $2500
$1750

Browning Arms Model 1885 .45-70 Govt
.45-70 Govt
28” octagon heavy barrel
Browning iron sights w/ adjustable peep sight
Checkered wood forend and buttstock
Curved metal butt plate
MSRP: $2500
$1500


TACTICAL

HK MR762 A1 w/ LRP Upgrades
.308/7.62
Leupold Mark 6 3-18x44MM 34MM Tube M5B2 FFB Tremor2 Reticle
SPUHR SP-4024 0MIL/0MOA 34MM Cantilever Mount
Atlas B10 V8 Bipod w/ Larue LT271 Picatinny Mount
HK G28 Adjustable Cheekpiece Buttstock
Advanced Armament Suppressor Adapter
(THIS IS A MUCH NICER BUILD THAN THE FACTORY MR762 LPR BUILD)
MSRP $8000 Build
$6000

HK MR556 A1
.223/5.56
Leupold Mark 6 1-6x20MM 34MM Tubę M6C1 CMR-W Illuminated Reticle
Larue Tactical LT104 SPR-1.5 34MM Cantilever Mount
Magpul RUG Vertical Grip
Steiner DBAL-I2 Dual Beam Laser
Surefire Scout KE2-A Weapon Light w/ Surefire Picatinny Mount
Advanced Armament Suppressor Adapter
MSRP $7000 Build
$5000

LMT Defense MWS
Multi Caliber Semi Auto
SilencerCo ASR suppressor adapter
Upgraded trigger pin set
MP 6.5 Creedmoor 1/9 SS, 20 inch barrel
MP 243 WIN 1/9 SS, 20 inch barrel
MP 338 Federal 1/10 SS, 20 inch barrel
MP 260 REM 1/9 SS, 20 inch barrel
MP 7.62 NATO 1/10 CB, 16.5 inch barrel
MSRP $6100
$3750

Precision Firearms Model PF-15B
Semi Auto
6.5 Grendel
24 inch barrel
Upgraded grip, trigger, bolt release and safety lever
SilencerCo ASR uppressor adapter
Tangodown bipod
MSRP $3075
$2000


HANDGUN

Smith & Wesson Air Lite Pro 360PD
.357 Magnum
1.875” barrel
Single/double action
J-Frame revolver
High strength scandium alloy frame
Titanium cylinder
One of the lightest .357 magnums ever made
MSRP $1150
$750

HK Mark 23 .45 Auto
.45 ACP
5.87” threaded barrel
Picatinny combat rail
Custom built match grade accuracy combat handgun
Operationally deployed by U.S. Special Operations Command
Polygonal rifling
MSRP: $2500
$1750

HK 45 Tactical
.45 ACP
Threaded barrel
Molded finger grooves
Light/accessory picatinny rail
Internal mechanical recoil reduction system
HK lock-out system
Ambidextrous magazine release
MSRP: $820
$600

Ed Brown Custom Executive Elite 1911
.45 ACP
5" Government model slide, single stack Government frame
25 LPI checkering on forestrap and mainspring housing
Matte finished slide for low glare
Traditional "square cut" cocking serrations on rear of slide
Fixed black rear sight, gold bead front sight
Serrated rear of slide
MSRP: $3299
$2500

Ed Brown Custom Kobra Carry 1911
.45 ACP
4.25" Commander model slide
Single stack Commander Bobtail frame
Exclusive Snakeskin treatment on forestrap, Bobtail housing and slide
Single-side, carry profile thumb safety
Fixed black rear sight, orange HDXR front sight
Stainless finish
MSRP: $3399
$2600

Smith & Wesson Model 29 Custom Engraved
.44 Magnum
4” barrel
N-Frame series - Large
Double-action
Blued finish
Smith & Wesson custom wood display box
MSRP: $1300
$1000

What’s everyone using for their 300 PRC?

Plan to use:

Lapua brass
CCI 250
Hornady 212 ELDX

I use H4350 in my 300 WM

This is for an AXMC with a 1/9 twist 27” Win Tac barrel

I’m currently reading through the past threads but figured up to date info won’t hurt either

Thanks

ALL SOLD

All magazines in sealed factory packaging, except one of the KCI mags (removed from packaging and inspected, but never loaded; LNIB). Never bought the MP5 clone I’d planned to.

*SOLD* KCI (steel) 30rd x5

*SOLD* AC Unity 30rd x3 - $65 Shipped
*SOLD* AC Unity 40rd x3 - $75 Shipped

Take all AC Unity mags - $130 Shipped SOLD

Payment by DISCRETE PayPal F&F or you pay G&S fees.

WTT (+ my cash) for Vortex Gen 1 PST 2.5-10x44 SFP (MRAD)

I have a slightly used 24" factory Bergera Barrel. Has less than 100 rounds on it.

Asking $325 Shipped

This rifle is brand new and has never been fired. I just came from the factory. This is the custom shop version of the RPR in 6mm Creedmoor.

$1500 shipped to your FFL.

Call or text 8018079986 for more information.

Hey guys, looking at specs on a few scopes and I'm noticing some things that seem out of place. Keep in mind I'm a novice at this so maybe there's a perfect explanation. Or maybe the specs are listed wrong? I don't know. What do you think?

GPO Centuri
3-18x44i 23.3 oz, 13.3", 90" of elevation, 30mm tube
2.5-15x50i 22.7 oz, 14.7", 110" of elevation, 30mm tube

Doesn't it seem wrong that the 3-18 would be over an inch shorter and only a half an ounce lighter? The strangest thing to me is why it would be so much shorter? Also, with the same tube diameter, why would the internal elevation be so different?

The clamp is brand new. It will do picatinny or arca with there rlok system. The dial that you adjust got scratched but they are sending me a new one so they won't be an issue. I bought it but didn't fit on the new accutac lp50 bipod I bought. I can add a bipod to the deal if your looking for a package deal.

They wouldn't take it back so since I can't use it I need to sale it.

$160 shipped save $15 on it with free shipping.

FOR SALE:

2x LaRue MBT 2 Stage curved Triggers $100 shipped or both for 190 shipped, Brand new

1x LEFT HAND ARC CDG Long Action, pivoting bolt, 20 MOA Rail all black, round knob, with X-Cal 300 Norma Barrel, Lapua Mag boltface, SOLD
x1 Extra X-Cal 300 Norma Barrel - $2k shipped to your FFL or if near KC area can meet up, will not split up.

1x Bartlein Blank 5R MTU Contour 7 Twist .224 28 - $425 shipped
1x Krieger Blank M24 Contour 7.5 Twist .243 28 - $400 shipped
1x 6CM impact Prefit (cut by Radix) 20 inch comp contour cut approx 300 rounds down pipe - $400 shipped
1x LEFT HAND Long action CIP Vision Chassis - Armor Black -$1250 shipped
1x brand New Hawkins 36mm 0 MOA 1.54 mount - $260 shipped
1x LMT enhanced bolt carrier (not complete, just carrier) $175 shipped


trades, are of course accepted and encouranged, but I won't be adding ANY money on my end, at all.

i'm looking for:

Leupold Mk4HD scopes in MIL (PR-1/2/3 reticle)
Lapua 6BR brass
Berger Bullets
vortex Fury HD binos with AB
Kahles scopes (624i/525i)

Hate to do it, (especially the Scmidt) but I have to let some things go to fund life stuff.

Schmidt & Bender 5-25 H2CMR reticle. Body and glass is perfect condition. Box included Sold

Kahles 624i SKMR1 ret. Right side windage. Glass is clean and body is 99%. There’s one teeny mark on the bottom of the tube. SPF

Vortex pst gen2. 1-6x24. VMR-2 mil illuminated ret. Ran it on a .22 to one range trip. Basically new. Box and papers included $400 shipped

34mm DTA mount. 20 moa. 1 1/2” high. Internal bubble level. Cerakoted fde. Replaced the factory screws with Badger Ordnance torx. The original screws were tiny allen heads that liked to strip. $200 shipped

Spuhr 4001. $300 shipped

PM with any questions or pictures. I’ll get some of the mounts tonight. Thanks yall

This is rock islands 2011 in 9mm. I got it because I couldn’t believe I could own a 2011 under $1000 but this was it. It has never given me any issues and shoots nice, accurate, and is affordable! I went back to a striker fire for my match gun (I know, weird), so this one is up for grabs. Someone will love this gun. Shot 500 rounds max.

Comes with 4 mags and I think I have the factory box for it as well. Firm at $600 shipped.

Will ship FFL to FFL.

So... over the years I've used, removed, installed, replaced a fair few 'pre-fit' barrels - almost all Savage barrel nut style, though. Along the way, via the school of hard knocks, I found out about the joys of barrels... not always pointing where you want them to - as in having to use up most of your windage or elevation (or both) to get the gun zeroed. *Especially* with factory nuts and lugs. Switching to quality aftermarket lugs - surface ground flat and parallel - and aftermarket barrel nuts, with the mating surface machined perpendicular to the axis of the threads, made a *huge* difference. Basically eliminated it, in my experience.

Fast forward to more recently... I've got a couple barrel-nut pre-fits - one a Proof CF, and the other a Shilen, both with aftermarket nuts - and an Origin action. And they both 'point' about 5-6 mils off to the left

I didn't really notice it at first, because the first scope (Bushnell XRSii 4.5-30x) I had on that gun with the first barrel (Proof CF 6.5CM) had a wider range of adjustment, so I never really bumped into the edge of the range of travel. The second barrel (NSS/Shilen 223 Rem) actually points a little less off to the side, so I didn't notice that one either, even when I changed the scope out for a Burris XTRiii 5.5-30x. But when I swapped back to the Proof barrel, I got it zeroed... but started having all kinds of problems with the scope not following the adjustments, or randomly changing POI.

After taking everything apart - barrel off, rail off, scopes out of the rings, etc. - and not finding anything loose, I put it back together with the Burris scope and Proof barrel. Since it'd been completely disassembled, I figured I'd stick the bore sighter on it, and holy $hit I was about 3 clicks off the far left side of the windage travel. Swapped out the Burris for the Bushnell, and while it wasn't up against the edge of it's range, it was definitely way, way further over than I would like. Pulled the Proof barrel and put the Shilen back on. As mentioned earlier, it didn't point *quite* as far over, enough so that the Burris would actually work with it. Barely.

FWIW, both barrels have the nuts (red) loctite'd on, after setting the headspace with the appropriate gauges.

Unfortunately, I don't have a *shouldered* barrel handy for this action to test this out further. Might be able to borrow one from someone local.

I'm *pretty* sure the face of the receiver, the face of the nut(s), and both sides of the lug were as clean as I could get them. Not sure what else might be the culprit as far as pushing both barrels over that far. Or more specifically... I can think of a few things, but I'm really not liking the direction those thoughts are headed.

Curious what else folks here think might be the cause - or the solution.

FS: Brand new Defiance "Classic" Long action, Magnum Bolt face. This action weights sub 23 oz. Lighter than most SA's on the market. Has pinned rail and recoil lug. Still takes defiance ruckus spec prefit barrels and I had my my gunsmith confirm that this one's in spec.. Bought for a build I never got around to and plans have changed. $850 shipped to your FFL

Have a 527 ZCO MPCT2 reticle that was sent in for the NLE turret upgrade. Scope is in excellent condition. I bought it from another hide member and put it on my backup gun, it’s lived there ever since.

$3,200 shipped

I’d trade do partial trades for:
Berger 105 hybrids
109 hybrids
Varget / H-4350 if you’re able to ship powder or are local to Virginia Beach.
Impact 737 .308 BF
MPA Matrix Pro 2 / Vanquish chassis

With the New production, research and development Facility being built I am eager to see what shot show 2025 has in store. Of course the Meostar R series was released last year but I'm still not seeing it for sale on this side of the pond. Would love to have the 4-24x56imm personally.
Also have noticed a huge new line of optics called the Meoforce DF series for tactical/military application including three prism scopes, red dots, and five scopes that i can't even find pricing for. Visually the look like revamped meostar ZD and TAC scopes of which I own a ZD 4-16x44imm which is an INCREDIBLE optics for $1500 retail. Personally did not pay close to that haha. In the force DF line is a 5-30x56imm that is 100% new in terms of Specs and Visuals, being their most powerfull and heavy
Scope to date. Looks veeery appetizing.

If anyone has more "in the know" information i would love to hear about it.

Only 18k from every Dane.
Login to view embedded media

Looking to buy a Not Too Beat up Axmc 308 magazine adapter . Black or Tan PB works for me.
Found one

I just received a Bartlein barrel from Craddock Precision. It's a 16" 1:7 twist, cut rifled 5R stainless steel mid-length. 750" GB. I don't have a good scale, but I think it's listed at 2.1 pounds.

I'm going to send this barrel off to have it converted by D Wilson to work with my LMT MRP, but I wanted to make sure it shot well first. I mocked it up today, my goodness, what an absolute hammer!

I just wanted to provide a quick review in case anyone is on the fence about spending $700 plus without reading a whole lot of reviews, I am beyond happy with this Barrel.

It's gassed perfectly for my needs, the gas port is around. 074". It also shoots lights out with everything I've tried, and I've done zero load development. I just shot a generic load of 77 SMK, 23.5 grains of IMR 8208 XBR. The first 10 round group I shot after a quick break-in with 20 rounds of cheap M855 was .82", and the first 8 rounds went into the .5"s. I'm not making excuses, but it was damn cold, gusty, and snow was blowing in my face. Velocity was 2,649 FPS with decent extreme spread and SD. I'd imagine as it breaks in I'll pick up some speed and it will be close to 2700.

To start this thread off, I find that mayonnaise is by far the most vile of condiments to ever exist. It tastes like paste (aka glue) on a sandwich and has no place in our culture. So many dips & similar products use mayonnaise as a base ingredient and it completely overwhelms the flavor profile because even with all the spices that are thrown in, it still tastes like well spiced "glue".

And for some reason all of the fast food burger joints have incorporated mayo into their products and it's at best a 50/50 shot when you explicitly specify in your order to exclude the mayo that when you open up your bag that damned if you don't have a double helping of mayo on your burger. It's beyond infuriating.

Fight me on this.

-LD

Like the title says k25 I for sale with arc rings
Every works perfectly

Sold with rings PayPal FF or GS your cover fees

Title says it all - looking to buy a used Leupold MK8 1.1-8 CQBSS LPVO. Not super concerned about the condition.

Thanks!

Good for 40% off any Nightforce optic, redeemed through Nightforce by mail. Will have another in a few weeks from another match I’ll post up as well. $300

SOLD

The metal MDT mags are 3.715 (300WM) and 3.850 (300 PRC.)

The Magpul is Magnum LA.

Pretty sure the Brownells is made by MDT. I had one of these years ago when I had a 223AI and filed out the front so I could load long and it was flawless. This one has been sitting in a drawer still sealed in the wrap.

No time to shoot anymore.

Add $10 for shipping no matter how many you want.

$40 each for the MDTs.

$20 for the Brownells/MDT 223

$15 for the Magpul

-OR-

$85 shipped for ALL.

Will give preference to anyone wanting to buy all.

Like the Title says, expires 12/13/25. 300$

Ever dealt with frogs? Pepe doesn't fuck around!
Login to view embedded media