Ready to try some handgun loads in the offseason--I've got my rifle rounds pretty well squared away.

Was setting up for 44 Mag according to instructions (Redding Dies). The seating die was "crushing" my brass (luckily I had some hold brass and was practicing with dummy rounds).

Instructions were to screw the die all the way down to get the roll crimp. But after some crushed brass and some "wtf cursing" I ended up backing off the die a good 2 turns--it seems the crimp comes pretty "early" and I had to back the die WAAAAY out (4-5 turns) to get my seating with no crimp. Is this normal? Dillon 550/Redding dies. I know Hornady does this as well but since I dont crimp rifle, I just back the SOB off (and 1 turn is fine) and get the seating right. But 44 mag--different beast.

TLDR, instructions say screw it down for roll crimp, I found I needed to back off 2 turns to get a proper crimp and not crush brass--Dangerous or not?

Thx.

Zeiss Victory PRF 8x26

Well used laser range finder in working condition. Some scuffs and scratches on body. Nothing noticeable on glass when looking through it, but might have small scratches on it.

Weighs approx 11 ozs, bout 5.5 inchs long by 4 inches across approximately.

Original owner. No box or paperwork. Just carrying case and rangefinder. Glass is very bright and has excellent image. Rangefinder easy to use and always worked.

$260 shipped to lower 48

Ppff, venmo, check, money order, cash app

Pm me if you want it. I will only respond to your PM. Beware of scammers.

So I have done a few ar10 builds in the past, 2 using Aero Precision m5 lowers, and 1 using an LMT lower. I have a VSeven Harbinger receiver set that I will be doing a build with later this year in October, but for right now, I want to do a new build and I want to try out a new ar10/lr308 receiver set.

What receiver sets would you recommend? I've looked at SLR, Zev/MegaMaten, NEMO, and Noveske, but I'm open to other suggestions. I wouldn't mind doing another LMT build but I'm looking to work with something new.

Nice police trade in P226. Frame made in Germany, frame rails in good condition, pistol shoots well. Payment via PayPal F&F, Venmo, Zelle, USPS MO. $500 Shipped.

Your FFL must accept from a private parts, otherwise add $35 for transfer fee from my FFL. SOLD

Anyone shot both of these? Which do you prefer? Which is less concussive?

I am looking at rifles to shoot in factory class. What rifles are being used competitively and why? I have been looking at the Seekins PH2 NRL, Savage 110 Carbon Tactical, and Tikka UPR. I have a Seekins Element in 300PRC and would get one in 6.5 Creed if the stock was adjustable, but it's not...Thanks!

Hey all,
Have a form 1 question. I've done a few but they were "domestic". SBRing my B&T APC9SD and I am little confused on what was correct to put for the manufacturer. It was manufactured by B&T AG in Thun, Switzerland (laser etched on the upper which is the seralized part) but imported by B&T USA LLC which is roll marked on the barrel which is also serialized but removable so I am leaning towards Brugger and Thomet, Switzerland but maybe it should be both? I am in full on paralysis by analysis so I wanted to ask folks who have done this more than me. Not sure if I should let it ride or nuke the form and start over. Thank you for the help!

Sight mark wraith mini thermal with an adm Qd mount. Scope is like new in the box.
$1400 reduced $1300 paid $1800 with the mount. Will trade for a leupold MK5 hd mil scope

Have a few questions about a project I am working on. Before anyone says to get custom action , I have custom actions but for this I am specifically going old school R700 .
I am doing Mack bros bolt in a trued receiver with a remage style barrel.
Questions:
Would there be any cons to using a stainless receiver? Would it have more difficulty trueing or issues with work hardening? Would lapping lugs be wierd being a harder material on the receiver than the bolt?
What is the point of bolt face truing and is it even necessary?
If I go remage it shouldn’t matter the thickness of the recoil lug, so is there a size that would be best for my 7saum build if it’s not necessary for specific headspace?
Only truing I plan on doing is what’s necessary to fit aftermarket bolt and squaring face and recoil lug up before barrel install, as well as polishing raceways.
Whole thing is getting cerakoted when complete.
Is there anything else I can/should do to make this a nice build?

Used Zeiss Terra 10x42 binos. Glass is great on them, I just don't use them as much as my rangefinder binos.

$250 shipped.

Heckler Ergo-Vert Grip for MPA Matrix Pro Chassis.

I loved the Grip, but it inspired me to create my own molded to my hand so I don't need it anymore.

$40 shipped.

MPA Tripod Lock. Works great, my tripod just has a locking function on it so this is no longer needed.

$85 shipped.

Please review the forum rules linked below, before posting. Members are reminded that bumping posts is limited to once every 48 hrs.

Has anyone recently ordered a Solas action that can share how long it took to ship?
Mine was ordered a month ago and still shows processing.

Hi guys,

I install the timney trigger on my Glock 21. The trigger pull is beautiful!

Upon using I notice that the trigger safety even without pressing it will fire .

I left message and email Timney but they never got back to me. I'm just afraid if I accidentally drop the pistol that it might go off. Its been 2 weeks so far nothing from Timney.

Maybe you guys who experience same problem can help find a remedy

Does anybody have a pic of the mpct 2x reticle on low power? Is there a solid black line below the Christmas tree on the vertical
Line? I know they got rid of the line above but they did move it to below like the mpct3?

Athlon Cronus G2 4.5-29 with aprs1 mil reticle has some scratches on the bottom shown in the picture. Tracks prefect and glass is clear. Includes butler flip up caps and pretty sure I have original box.

Keeping the barreled action and trigger. Dont see myself shooting the AX chassis much.

Again, This is not a AICS AX is a takeoff AI AXSA chassis

1,500 shipped

Might trade for a RRS 22i setup up or down depending on kit.

Will PM pics on request

Proof carbon 22” 6.5 creedmoor, lone peak/impact pre fit.

50 rounds on it, shoots 100gr eld VT at 3200+ really well.

750$




5 shots

It is a "different guy"..... but we all know........ Yet, another FU to the woke assclowns.


https://www.axios.com/2025/02/11/hegseth-renames-fort-bragg-army-base

WTS a used Vortex Razor HD G3 1-10x, MRAD reticle. Great shape. One little mark on top of the tube. Comes with switchview lever and Onehundred Concepts scope caps. $1SOLD shipped. Zelle is preferred. Can accept PP discrete.

***mount, upper, and ACRO not included in sale***

NO TRADES

For sale:

(1) Used RRS Ascend center column with integrated ball head. Nothing at all wrong with it, just not being used as I don't have a RRS.

$680+ new
Asking $450 or trade

Pics upon request. Details in link

*removed*

Looking to sell this head. Had arca clamp. A few scratches, but works fine.

Sold.

Site has a 48 hour bump rule. Do not bump before then again or you will be banned and post deleted.

Up for grabs is a Beretta PX4 compact, bought this and planned on sending it to Langdon tactical for an optic cut and carrying it but decided to stick with another gun. It has about 300 rounds I'd say and some holster wear nothing serious. Looking to get $570 shipped

​