Selling a used, but not abused Tangent Theta 525P Gen2XR with CCA (Counter Click Assist) Turrets.

CCA Turrets were only released once and are extremely hard to come by. They're similar to S&B's MTC but significantly better.

$4,000 shipped with it's original packaging.

Add $350 for a QDP SPUHR Mount.

Check, Wire, ACH, Zelle or CC + 3%. Texans pay tax.

No trades.

Thanks,
Preston

Used in very good condition

Larue PredatOBR Package Includes:

14.5 inch 7.62 x 51 barrel cartridge with PST gas block, gas tube, barrel nut and 12.4 inch handguard with 2 movable 3 inch picatinny rail slots and qd sling attachment mount. Barrel has an OSS/Huxwrx Muzzle Brake pinned and welded by D Wilson bringing it over 16 inches total. Under 300 factory rounds on barrel.

18 inch 260 Remington barrel cartridge with PST gas block, gas tube. barrel nut and 14.5 inch handguard with full length removable Sawtooth Dependabilt arcavrail. Barrel has a Silencerco ASR Muzzle Brake on it. Unsure of round count but believed to be approximately 700 rounds.

Comes with barrel wrench and rollup bag. Rifle will ship in roll up bag.

Two mags included. 1 Larue 20 rounder and 1 PMAG 25 rounder

All total this package would cost approximately 6000 plus tax new.

Asking 3950 shipped and insured to lower 48.

Payment via usps money order, GunTab, bank check, regular check, and other electronic forms of payment can be discussed especially if you have good feedback.

I am happy to speak with you on phone and send pic with time and date to make sure you are paying correct person. Do not post I will take it in this ad. PM me and I will respond directly to your PM. There are many scammers out there please be careful.

FS: Proof Stainless barrel for Terminus QC short action
6 GT
1:7.5 twist, 26"
Cerakoted graphite black
Only 674 rounds logged *SOLD PENDING FUNDS

Proof Stainless barrel for Terminus QC
6.5 Creedmoor
1:8 twist, cut down to 20"
Only 302 rounds logged *SOLD PENDING FUNDS

$340 shipped (each)

Venmo or Zelle preferred

Looking for a Curtis Customs Axiom/Terminus Apollo short action with .308 bolt face

Prefer DLC/Nitride coated

Brand new Auto Trickler V4 with FX120i scale
This is duplicate unit for me and plans have changed, so selling extras.

The trickler came direct from MacDonald Innovations

The FX120i came direct from CE products (AutoTrickler distributor)

The only powder run through this unit was during the set up and function testing which CE tech support did with me in real time which makes their customer service incredible. Not to mention we were setting up 4 units at once in real time (2x Autotrickler and 2x SuperTrickler)
SOLD shipped

*items in photos that are not AutoTrickler or FX parts are not included*

a question just occurred to me in a moment of karmic enlightenment. back during the Russian collusion by Trump FBI game,why did the progs and most of the deep state care. they had been happily colluding with the Russians from 20s to 80s. was a lapse of critical thinking for me. i know it was all pretend but the libs were just all crying about betraying the country which they had been doing > 50 years. same applies to most of their heroes. odd.

MDT Sporting Goods Ltd. Announces Their New Control Bridge - ACC Elite.

We're excited to announce the launch of our new MDT ACC Elite Control Bridge. This accessory acts as a mirage mitigation device and provides a barrel cover when reaching up and over your forend for added control.

The textured top face reduces the chance of your hand slipping and provides additional grip, while the six screws securely fasten the bridge to the forend for a very rigid interface. Optionally, they can be stacked for full forend enclosure or coupled with the NV Bridge (coming soon). It has clearance for large-diameter, straight taper match barrels. This product is only compatible with the MDT ACC Elite chassis systems.

The MDT ACC Elite Control Bridge is now available with a starting price of $119.95 USD and can be found at https://mdttac.com/control-bridge-acc-elite/

Like new T2 on a scalarworks mount. All the stuff for both. Had maybe 30 rounds fired under it and sat in the corner of the bedroom. Little bit of dust but otherwise perfect.

$750 shipped.

I have only used the AR style angled grip, is there an advantage to using the vertical grip, also what is the purpose of these threaded holes

Looking for a 1.54” height 0 moa 34 mm mount for my 7-35 atacr.

Prefer a badger C1 max, with arc.

Will entertain others

Pm me with what you have, cash, trade or a mix works for me.

Thanks

So we have pretty hard water. The city supply comes from wells. The report puts TDS at 1200 a ppm meter shows about 700ppm. Considering the geology and the color staining. I would suspect that a lot of the ppm is going to be iron and calcium/lime.

I have been looking at three stage filters but I wonder how much they will be able to drop the ppm. It makes me wonder if a full house RO system would be better. Who is filtering well water here? What's your filter set up? How was your water before and how much improvement have you seen?

I have a 2 Vets recon V2 that I would like to trade for a V2 inverted.

Let me know if you have one and would like the standard.

Thanks

Here is the New AMG kit we are offering:

Geissele Super Duty MOD1​

Vortex AMG 1-10x24 FFP EBR-9 Super Short Scope & Reptilia Mount​

WTS: ARC rings 34mm tube 28mm height

$120 shipped conus PayPal f&f

Long ranges classes near Lewisburg WV? Within 2 hours?

Just saw this on SSD. Not a lot of info, but is said to be 8.5" in length and about 18 oz.

sold

300ct Nosler .30 110gr Varmageddon projectiles $SPF
99ct Lapua 6.5 Grendel brass. SRP, Alexander Arms headstamp $SOLD
56ct once fired RP 6.5 Creed brass $20
Warne 500M 1inch low height Scope rings $20
Warne Hyperlight 1inch low rings $70
136ct Nosler 30cal 175gr RDF Factory Second$30

Prices shipped, if buying multiple items we can work a deal. Pm if interested.

I’ve gotten so much good info from this forum over the years and finally figured I’d join in. Good group here, thanks to all who take the time to share their knowledge and experience. I’m a long time shooter, reloader and archery and gun hunter. Also been getting into competitive shooting over this past year. Action steel, steel challenge, rimfire PRS, and multi-gun.

I have a OTB griffin can, Leupold 2-10x w/piggyback DPP that needs to be attached to a SPR. My question is do i go with a LMT MRP Quad setup or use the MR556 A4 as a platofrm. The HK would be a touch more expensive. The LMT would be all factory but with a Proof SS barrel converted for use.


****EDIT****
I went with the MR556 A4 and converted to a SPR setup via B5 sopmod stock and a geissele rail. Couldnt be happier. See below for details (1/2" 10 round groups, good velocity, super soft shooting)

I didn’t see this one coming:

It’ll come as little surprise to anyone here, but the recent “protests” by Illegal Alien Invaders (“IAI”) and what they REALLY want has been intentionally buried by the Fakestream Media.

Login to view embedded media
They don’t want to be or become Americans. They want to either retake or sieze as much of America for themselves as possible. They have no desire or intent to assimilate. They want to push their “La Raza” agenda (“The Race”). They are genuine racists who believe in the superiority of the Latino above all other races.

It is widespread. It is irrefutable. They are criminal invaders.

Selling 390+ (I quickly counted 393) pieces of once fired Lapua 6.5 Creedmoor LRP brass. All the same lot, all fired from same rifle.
$old

Have some ammo I’d like to sell, never sold ammo on the hide. What are the rules and regs e.g. must be shipped by what carrier and declared hazardous? Would ship from CO.

MPA Folding Chassis for a Tikka Short Action. Fresh Cerakote. $750 plus shipping .