Looking to buy a Not Too Beat up Axmc 308 magazine adapter . Black or Tan PB works for me.
Found one

I just received a Bartlein barrel from Craddock Precision. It's a 16" 1:7 twist, cut rifled 5R stainless steel mid-length. 750" GB. I don't have a good scale, but I think it's listed at 2.1 pounds.

I'm going to send this barrel off to have it converted by D Wilson to work with my LMT MRP, but I wanted to make sure it shot well first. I mocked it up today, my goodness, what an absolute hammer!

I just wanted to provide a quick review in case anyone is on the fence about spending $700 plus without reading a whole lot of reviews, I am beyond happy with this Barrel.

It's gassed perfectly for my needs, the gas port is around. 074". It also shoots lights out with everything I've tried, and I've done zero load development. I just shot a generic load of 77 SMK, 23.5 grains of IMR 8208 XBR. The first 10 round group I shot after a quick break-in with 20 rounds of cheap M855 was .82", and the first 8 rounds went into the .5"s. I'm not making excuses, but it was damn cold, gusty, and snow was blowing in my face. Velocity was 2,649 FPS with decent extreme spread and SD. I'd imagine as it breaks in I'll pick up some speed and it will be close to 2700.

To start this thread off, I find that mayonnaise is by far the most vile of condiments to ever exist. It tastes like paste (aka glue) on a sandwich and has no place in our culture. So many dips & similar products use mayonnaise as a base ingredient and it completely overwhelms the flavor profile because even with all the spices that are thrown in, it still tastes like well spiced "glue".

And for some reason all of the fast food burger joints have incorporated mayo into their products and it's at best a 50/50 shot when you explicitly specify in your order to exclude the mayo that when you open up your bag that damned if you don't have a double helping of mayo on your burger. It's beyond infuriating.

Fight me on this.

-LD

Like the title says k25 I for sale with arc rings
Every works perfectly

Sold with rings PayPal FF or GS your cover fees

Title says it all - looking to buy a used Leupold MK8 1.1-8 CQBSS LPVO. Not super concerned about the condition.

Thanks!

Good for 40% off any Nightforce optic, redeemed through Nightforce by mail. Will have another in a few weeks from another match I’ll post up as well. $300

SOLD

The metal MDT mags are 3.715 (300WM) and 3.850 (300 PRC.)

The Magpul is Magnum LA.

Pretty sure the Brownells is made by MDT. I had one of these years ago when I had a 223AI and filed out the front so I could load long and it was flawless. This one has been sitting in a drawer still sealed in the wrap.

No time to shoot anymore.

Add $10 for shipping no matter how many you want.

$40 each for the MDTs.

$20 for the Brownells/MDT 223

$15 for the Magpul

-OR-

$85 shipped for ALL.

Will give preference to anyone wanting to buy all.

Like the Title says, expires 12/13/25. 300$

Ever dealt with frogs? Pepe doesn't fuck around!
Login to view embedded media

Ready to try some handgun loads in the offseason--I've got my rifle rounds pretty well squared away.

Was setting up for 44 Mag according to instructions (Redding Dies). The seating die was "crushing" my brass (luckily I had some hold brass and was practicing with dummy rounds).

Instructions were to screw the die all the way down to get the roll crimp. But after some crushed brass and some "wtf cursing" I ended up backing off the die a good 2 turns--it seems the crimp comes pretty "early" and I had to back the die WAAAAY out (4-5 turns) to get my seating with no crimp. Is this normal? Dillon 550/Redding dies. I know Hornady does this as well but since I dont crimp rifle, I just back the SOB off (and 1 turn is fine) and get the seating right. But 44 mag--different beast.

TLDR, instructions say screw it down for roll crimp, I found I needed to back off 2 turns to get a proper crimp and not crush brass--Dangerous or not?

Thx.

Zeiss Victory PRF 8x26

Well used laser range finder in working condition. Some scuffs and scratches on body. Nothing noticeable on glass when looking through it, but might have small scratches on it.

Weighs approx 11 ozs, bout 5.5 inchs long by 4 inches across approximately.

Original owner. No box or paperwork. Just carrying case and rangefinder. Glass is very bright and has excellent image. Rangefinder easy to use and always worked.

$260 shipped to lower 48

Ppff, venmo, check, money order, cash app

Pm me if you want it. I will only respond to your PM. Beware of scammers.

So I have done a few ar10 builds in the past, 2 using Aero Precision m5 lowers, and 1 using an LMT lower. I have a VSeven Harbinger receiver set that I will be doing a build with later this year in October, but for right now, I want to do a new build and I want to try out a new ar10/lr308 receiver set.

What receiver sets would you recommend? I've looked at SLR, Zev/MegaMaten, NEMO, and Noveske, but I'm open to other suggestions. I wouldn't mind doing another LMT build but I'm looking to work with something new.

Nice police trade in P226. Frame made in Germany, frame rails in good condition, pistol shoots well. Payment via PayPal F&F, Venmo, Zelle, USPS MO. $500 Shipped.

Your FFL must accept from a private parts, otherwise add $35 for transfer fee from my FFL. SOLD

Anyone shot both of these? Which do you prefer? Which is less concussive?

I am looking at rifles to shoot in factory class. What rifles are being used competitively and why? I have been looking at the Seekins PH2 NRL, Savage 110 Carbon Tactical, and Tikka UPR. I have a Seekins Element in 300PRC and would get one in 6.5 Creed if the stock was adjustable, but it's not...Thanks!

Hey all,
Have a form 1 question. I've done a few but they were "domestic". SBRing my B&T APC9SD and I am little confused on what was correct to put for the manufacturer. It was manufactured by B&T AG in Thun, Switzerland (laser etched on the upper which is the seralized part) but imported by B&T USA LLC which is roll marked on the barrel which is also serialized but removable so I am leaning towards Brugger and Thomet, Switzerland but maybe it should be both? I am in full on paralysis by analysis so I wanted to ask folks who have done this more than me. Not sure if I should let it ride or nuke the form and start over. Thank you for the help!

Sight mark wraith mini thermal with an adm Qd mount. Scope is like new in the box.
$1400 reduced $1300 paid $1800 with the mount. Will trade for a leupold MK5 hd mil scope

Have a few questions about a project I am working on. Before anyone says to get custom action , I have custom actions but for this I am specifically going old school R700 .
I am doing Mack bros bolt in a trued receiver with a remage style barrel.
Questions:
Would there be any cons to using a stainless receiver? Would it have more difficulty trueing or issues with work hardening? Would lapping lugs be wierd being a harder material on the receiver than the bolt?
What is the point of bolt face truing and is it even necessary?
If I go remage it shouldn’t matter the thickness of the recoil lug, so is there a size that would be best for my 7saum build if it’s not necessary for specific headspace?
Only truing I plan on doing is what’s necessary to fit aftermarket bolt and squaring face and recoil lug up before barrel install, as well as polishing raceways.
Whole thing is getting cerakoted when complete.
Is there anything else I can/should do to make this a nice build?

Used Zeiss Terra 10x42 binos. Glass is great on them, I just don't use them as much as my rangefinder binos.

$250 shipped.

Heckler Ergo-Vert Grip for MPA Matrix Pro Chassis.

I loved the Grip, but it inspired me to create my own molded to my hand so I don't need it anymore.

$40 shipped.

MPA Tripod Lock. Works great, my tripod just has a locking function on it so this is no longer needed.

$85 shipped.

Please review the forum rules linked below, before posting. Members are reminded that bumping posts is limited to once every 48 hrs.

Has anyone recently ordered a Solas action that can share how long it took to ship?
Mine was ordered a month ago and still shows processing.

Hi guys,

I install the timney trigger on my Glock 21. The trigger pull is beautiful!

Upon using I notice that the trigger safety even without pressing it will fire .

I left message and email Timney but they never got back to me. I'm just afraid if I accidentally drop the pistol that it might go off. Its been 2 weeks so far nothing from Timney.

Maybe you guys who experience same problem can help find a remedy

Does anybody have a pic of the mpct 2x reticle on low power? Is there a solid black line below the Christmas tree on the vertical
Line? I know they got rid of the line above but they did move it to below like the mpct3?