$100 OBO shipped for everything.

Anyone ever deal with John Huber's adjustable two-stage triggers in a Mauser. A couple years ago I was so frustrated trying to get his dual ball bearing adjustable two-stage in my M48 I had to send the barreled action to him to dial in. It's not bad but not amazing. Like my M48, I cloned my 24/47 into Yugo civil war era sniper. I’d like to have a nice modern two-stage adjustable (or not) feel with hopefully a 1-2lb free and easy first stage meeting a 3ish lb break over The Wall. I’d rather not go Timney, as I understand, will require dramatic modification of the stocks.



I'd like to do the same with my mint-barrel Persian 98/29 but am wary of any stock mod as that's far more valuable/rare than M48s or 24/47s. Gunsmiths and precision shooter (especially Fudd sporters guys) have been tweaking, building, modifying Mauser actions for decades. I spoke at length with John a couple years ago and, while no doubt a brilliant man, went off on all kinds of tangents that I just could not follow i.e. psychology of the “break” and timing theory about meeting and crossing “the wall”. One of those guys that’s possibly on “the Spectrum” (whatever that mean nowadays). I just couldn’t follow. The million-times photocopied notes and hand-drawings that he includes with his trigger are just too cryptic for me to make sense of.

While I can field strip pretty much any rifle I own I am admittedly a bit ignorant and am not competent to make do-it-yourself modifications. I am not up to filing, grinding, etc, an would rather bring o send the rifle to someone who can. I finally wrote this note (below) to him and look forward to how he responds.

John, I put your 2-stage in my 24/47. Unlike the M48 a couple years ago I will need to relive the stock a little it. Not prepared to commit to that just yet.

The initial 1st stage travel weight to the wall is around 4 lb and at the break is around 6lb. Worse than the original stock trigger.

How to lighten up initial pull?

• Is it a matter of snipping off small bits of the trigger’s sear spring to lighten?
• Are there lighter versions out there commercially? I checked Wolff www.gunsprings.com and they don’t appear to sell anything
• Sometimes when I half-pull the trigger and release it just dangles as loose.

Bearing adjustments.

• I’ve twisted and played with the bearing screws several times in many directions and just can’t really achieve anything meaningful other than fire/no-fire.

My hope/goal is to get a fairly light initial pull that breaks at “the wall” at about 3ish lbs. Can this be done with your trigger set? Any other modifications? People have been tweaking and modifying Mauser actions for years so I have to imagine I’m not trying to reinvent the wheel with my aspirations, although, I am not a do-it-yourselfer. Was hoping this would be a drop in affair with basic tweaks to dial in.

Any thoughts or ideas on how to get a match/precision style trigger (if not this one) in a milsurp rifle w/o mods?

(BTW, on an unrelated note, Josh Smiths adjustable 2-stage triggers for 91/30 are amazing and simple to install tweak. A REAL plus for any PU Sniper shooters).

Rimx Manzella chambered 20” match barrel MTU threaded 1/2-28 less than 300 rounds fired.
MDT acc chassis
Trigger tech trigger
$2500
Barrels action $1600
Will consider trades

Ergo KeyMod Bipod Mount new $15 **SOLD**

Like new set of Night Force X-Treme Duty Ultra Light 34MM 1.125 height rings. 6 screw caps.

$155 shipped

Very lightly used rifle, couple almost unnoticeable knicks on the stock. I have 2 300 PRCs, and only need 1.

20 MOA rail ($70), the rifle, and the APA Micro Bastard Brake ($160; brings the recoil down amazingly). NOTHING ELSE is included.



Price is $900 plus shipping - USPS MO, Venmo, PP F&F, or Zelle

Like new Ti nitride terminus Zeus action
I have the box and am original owner. Fifty rounds fired.

I am going back to a black one.

The Ti nitride has worn off on some of the rub points on the inside where the bolt rides. I reached it to Joel and he said this is normal.

Just trying to get what I have in it.
Asking 1600

Looking for somebody who has a BAE SkeetIR Operator and Maintenance Manual and Quick Reference Guide that they'd be willing to share. Would also be willing to pay shipping both ways so I can make a copy of them for myself. Photos are from a long gone classified ads, but show what they look like.
Login to view embedded media Login to view embedded media

Up for sale is a new Scar 16 NRCH package. Factory multicam cerakote, geissele scar trigger still in the box, magpul pistol grip, Leupold mark 6 1-6 CMRW, reptilla 1.70 mount with trijicon RMR top mounted, and Surefire scout pro. The optic and light are wrapped with Dangerfield Arms camo wrap. The suppressor is mounted for looks it is not part of the deal. $5000 for the entire setup, also willing to trade for higher end optics and cash on your end. Thanks for looking!

Hey everyone. I'm Austin from just north of knoxville at the moment. I've popped off alot of rounds over the years but very few long range shots. Decided I wanted to get a forever rifle and sprung for the mk22 to get started with a nightforce atacr 7-35x56. Hoping to hone my skills over the next year or so.

A300 Ultima 12ga​

New A300 Ultimate 12ga. Only fired a few rounds to pattern it. Comes with all 3 factory choke tubes.

$720 shipped to your FFL.

Take off from my colt m4a1
Keyhole forge
Only dry fired and cycled before it was removed from the rifle.

$110 shipped & insured.
Will not ship to CA, CT, DE, HI, IL, MD, MA, NJ, NY, or WA
Message me for more info

Looking to buy a complete tripod set up with leveling head, clamp and the legs. Looking to spend in the 700-1000 range.

Thanks

Brand new Timney Trigger #402 for a Winchester 70 MOA.

Bought the wrong trigger and by the time I went to install it, it was too late to return.

$100 Shipped
PayPal F&F, Venmo or Zelle for Payment.

Selling some 6.5 projectiles
188 140 grain eld match
60 130 grain Nosler RDF's
90 Sierra 142's

Would like to sell together

Asking $110 shipped for all

Selling a used AI AX308. This is a post-2014 (2015) model with the ability to swap barrels by simply loosening the tightening nut. This rifle comes with the OEM AI 20" barrel chambered for .308. The round count is unknown as I bought the rifle used, but I have put around 2000 rounds on the barrel and it still groups sub-moa with ease. Also included is the AI muzzle brake and OEM AI magazine in Pale Brown.

SOLD


Zelle, USPS MO for payment. Would also prefer a FTF here in DFW, but we can discuss shipping options. If your receiving FFL requires I send from an FFL we can work that out as well.

The only trades id be interested in would be some sort of trade deal on a AI AW or KAC SR25 EC or EMC.

Please note: The bipod is not included.

I have a NF ATACR MIL-C 5-25x56 F1 for sale. Has a small nick in the picture. Everything work great. Used in PRS matches.

Rings are not for sale and No trades at this time.

- Mil-Radian
- MIl-C
- FFP
- 34MM tube

Asking $2,200.00 - PP F&F.

Vortex Impact 4000 $1250 shipped and insured. SOLD
Comes with original packaging, including zero targets and and everything pictured, the only items missing are the velcro tabs (loop), microfiber cloth, and T10 Tool (still looking for it). Im providing a Holosun T10 Tool as a replacement until I find the tool, never took it out of the gun room. The velcro tabs were all used, for some reason they didnt work as well as normal velcro loop tape (which I will provide 2 strips). Pic, keymod, and mLok attachments were never used or mounted.

Had this for a little over a year, seen a few matches but always took care of it. Only installed the battery before use, and removed after. The marks on the bolts are from my torque wrench (its a tight fit).

I accept most digital forms of payment, and we can discuss payment options if necessary.

I will ship USPS Priority, unless requested otherwise (pay the difference).

Please PM me first before posting to avoid scammers contacting you. Ill go by the timestamp in the messages of who is first if this is a hot item. haha.

I have a left hand Bergera HMR stock. Comes with a 12" Area 419 Acra rail, factory bottom metal and has been cerakoted.

Asking $450 shipped.

What bore guides does everyone recommend? I have bore guides that were made by Mike Lucas but I cannot get ahold of him. I’m not sure he makes them anymore. I need one for a Tikka .243 Thanks

I have a nice build for sale

bighorn origin action, krg bravo with custom blue sponge, area 419 weighted rail, adjustable butt pad, and a few other bravo accessories, TT special. The barrel is a polygonal 20" threaded green Mtn and shoots very well. I have a savage 6 creed barrel for it too.

Does not come with glass, can or bipod

I would really like to trade for a Vudoo or Rimx barreld action.

I have a 28" 25 GT pre-fit with 1,000 rounds on and is cut by Stuteville Precision.

Fits a Impact 737R.

Asking $250 + shipping

I have recently switched to 6.5 PRC (and also have a 7mm WBY). With the larger jaw on the Coax and the "spreader" screw set all the way in, I can barely insert the case head, and have to manually open the jaw further to remove the case. Not only is this a pain, I am worried it may cause misalignment. Is there a solution to this?

Badger Ordnance low profile Harris bipod mount.

$60 shipped. PayPal goods and services.

​