Heyo, got the rifle last summer, but life got in the way. Shooting a laser cut 450gr with 136gr of N570 for a baseline cold bore velocity of 2900 fps. Last Friday we finally zero’d the scope, did a dope check at 500 yards, and ran it out to a mile. Due to variable wind it took me 4 shots to hit, range owner tried it out and did it in 3. I pressed 20 more rounds and will check to see if we need to let the bore cool for more consistent fps, as the initial cold bore shot is faster. I also plan to check group size at the same time.
Now the homework starts to see what this rifle does and figure out how to stretch it to 2 miles.

Mark V Carbonmark Pro Weatherby Rifle chambered in 300 Weatherby. Has about 350 rounds through it. Shoots about .6” - .75” groups on average with the custom load I put together that shoots 215 Berger Hybrid Targets. Trigger was tuned down by Weatherby to right at 1.5-2lbs. Comes with 84 rounds of loaded ammunition. Weatherby brass, H4831SC, and 215 Berger Hybrid Target bullets going about 2750, so not screaming but accurate and consistent. Comes with the Harris bipod and an updated tension lever. Comes with the RCBS FL Die Set. Total Weatherby brass is approximately 246 pieces that will all be 3x shot when the current 84 are fired. This is my second 300WBY thus the total number of firings. Also includes 100 pieces of brand new Peterson’s 300 Weatherby brass. This package is ready to go hunt. Selling for $3,200 plus shipping. Located in SW MT so I could meet up if you live in Montana.

I’ve got a used SWFA Fixed 6x I do not need at the moment. It’s mil/mil. Glass is in great shape and the body/turrets have some slight handling marks as shown in pictures. No box but will ship in a weaver box and come well packaged.

$325 shipped to the lower 48. Zelle, Venmo or PP gift. Will also do USPSMO.

Here’s what we have on the schedule for online & in-person training courses for 2025-2026. Keep checking back for updates.

Online Training:
Click Here: Marksmanship 101
Click Here: Laser Rangefinder Employment Course

In-Person Training:
Click Here: Urban Light Fighter Course, 9-10th Aug 2025
Click Here: Urban Light Fighter Course, 6-7th Sept 2025
Click Here: Urban Light fighter Course, 25-26 Oct 2025
Click Here: Urban Light Fighter Course, 13-14th Dec 2025
Click Here: Mountain Rifleman Course, 20-22 March 2026
Click Here: Private Instruction

Anyone have experience with the Seekins DMR in 6ARC? What kinds of groups are you getting with Hornady factory ammo? Any reliability issues? How is the overall build quality?

T series spotter with arca attachment that was used for two matches. Works great.

$350 shipped via Paypal F&F, Venmo, or Zelle

I am having a Remington 40-x converted to a 300PRC I need to get a muzzle brake. Can anyone recommend a good one? Thanks

Never used. $SOLD.

Hoping to get some feedback from the Hide on support hand/rear bag. I’m still relatively new and want to make sure I am applying the proper fundamentals.

When using rear bag is it best to rest the rifle on the bag, the webbing of your hand (between thumb and finger), grip a bag rider, or really just 100% personal preference. Based on online content and the varying information it seems to me to really be personal preference but I’m hoping to get some feedback from some seasoned shooters.

Thanks in advance.

Sold my first 6.5CM without a hitch, heres my second up for grabs. Moving to 6CM.
Kelbly Atlas Lite Action
20" 50/50 Carbon Fiber/Nickel blend Barrel
KRG X Ray with NVG Front Rail Mount and ARCA Rail
Triggertech Diamond 2 Stage Adjustable
$2200 shipped from WI.

Leupold Mark 6 1-6 with the CMR-W 7.62 BDC reticle. Optic is phenomenal shape with only signs of wear being slight ghosting from the rings. Illumination and glass both in perfect condition. Comes with original box.

This is one of my favorite LPVO’s due to the reticle and stunning glass quality. The 7.62 reticle also aligns near perfectly with mk262 or other 77gr 5.56 match ammo.

$1400 Shipped

After 40 years of reloading, I think I finally screwed up ..... I think.

I was working up a new subsonic load (300 blackout) for one of my rifles, just a plain Jane AR15 that I've had a few years. I saw a load on Ultimate Reloader on YT and thought I'd give it a try. Berry's 220 gn plated bullets over 9, 9.5 and 10gn of H110, COAL 2.230", loaded 10 of each.
First shot .... BOOM! Thought I'd lost my hand! I rarely shoot with my left hand on the magazine but this time .... yep. It blew the mag to pieces.
You can see in the photos that the case head is still in the bolt face (bolt and upper are toast), the rest of the casing is in the chamber. It sent the bullet and thankfully didn't blow up my suppressor.
I have no idea what happened. My first thought was a double charge, still leaning towards that. I pulled all the others I loaded today and they were all on the money so my powder measure was working fine. I've mic'd a random selection of the bullets, they all measure .308-.3095 (is that acceptable??)
Would a bad case (head separation) be so catastrophic? It tore the bolt apart!
So clearly my upper and bolt are history, would you scrap the barrel too? The lower looks very slightly bulged at the mag housing and it broke the mag catch arm off but seeing as this component doesn't (normally) take any force, and you can by heavily skeletonized versions and polymer ones, I'm thinking I'll be ok to use it again, what do you guys think?
When I pulled the bullets I double charged one just to see if it was possible. It was, kind of. Two loads fit in but with a 220gn bullet it's a very compressed load and the round wouldn't stay at the set length, easing the bullet out a fair bit. It would still fit in the mag I think (didn't try) but I think it would have been noticeable in the box.
So, thoughts on what may have happened and thoughts on reusing the barrel and lower appreciated.

Triggertech special flat silver 150
Triggertech special flat black sold (still on rifle)
Triggertech diamond flat sold

I have a 224 Valkyrie Upper I would like to part with. I also have the dies and brass for it.

Barrel: 20in Wilson Combat Super Sniper 1:6.5
Gas block: fixed
Stag arms upper
Stag arms bcg and bolt
I don’t recall the hand guard maker

Several hundred rounds on it.

Asking $420 shipped.
Or if you don’t want the bcg $340 shipped.

FOR SALE: Marlin 1894 .44 Magnum – Leupold Scope – Cowboy Limited, Beautiful Setup

Up for sale is my Marlin 1894 lever-action rifle in .44 Magnum, a classic and highly sought-after rifle known for its reliability, accuracy, and timeless Western styling.

Make/Model: Marlin 1894
Caliber: .44 Magnum / .44 Special
Barrel: Octagonal barrel – beautiful and rare configuration
Scope: Leupold 1-4x mounted – crystal clear glass, perfect for brush hunting or short-to-mid range shooting
Sling: Premium leather sling included – high-quality, comfortable, and looks fantastic
Condition: Excellent – clean bore, smooth action, well cared for
Extras: Original box/manual

This is a fantastic lever gun setup – fast-handling, accurate, and perfect for hunting, range use, or collecting. The octagonal barrel and Leupold scope combination make it both functional and visually stunning.

Asking Price: $SOLD
Location: Athens, TX
Payment method: Credit Card, money order, check (must clear before shipment)

Mark 4HD 2.5-10
183738
Brand new in box $1000 obo shipped
Make an offer want to move this quickly!

I have a Rem 722 action (action before the 700, same footprint for stocks, bases etc) with a barrel I can’t remember who’s chambered in 308. The Barrel is a straight bull and the barrel was put on by a novice. It has a terrible paint job as well. $425 shipped will take trades

Ordered this for a build that wound up getting a Kahles K525i DLR. Never mounted, only time it was removed from the box was for these pics. Includes everything a new one does such as sunshade, tools, manual etc as well as an aftermarket throw lever.

$1300 SOLD TYD via discreet Venmo/PayPal. Ships USPS or UPS with tracking.

Tricer Lp
Used for a season, a couple of scratches, but pans as smooth as new.
Original box.
$165 shipped Venmo, cashapp

Selling a new and unused London Bridge 3 day pack in dnc color.
I think they were around $360 new,
Selling this one for

$210 shipped,

Venmo preferred payment but can use most of the others as well

Selling a black with camo sponge pattern stockys carbon fiber stock.
Fits rem700 and clones. Ejection port opened to match an origin action. Milled for an M5 bottom metal. Has t nuts install for an Arca rail. Used for a few hunts.
Selling for $375 shipped, Venmo PayPal or cashapp.

Long time hunter, I mostly archery hunt these days, but also enjoy rifle and pistol sports as well. Located in east valley of Phoenix metro on the hopes and prayers plan of some day drawing an elk tag in Northern AZ.

I’m looking to sell or trade some 7mm REM mag brass.
This is once fired brass. Various head stamps from Hornady, Norma, Winchester, HSM and Federal. Most places have brass listed over 1.56 per case. Make an order or trade!
There’s 485 Brass cases and 126 plated brass cases total of 611 cases. All once fired brass.
$300 shipped!
Trades, reloading stuff, brass from 6 creed or dasher, triggers for rem 700, surprise me.

Looking to trade for a 18 inch proof barrel for t3x in 6.5 cm. May consider another cal but prefer to keep the same. Less than500 rounds on this one, shoots 100 grain ELD vt .5 moa , same story with 147s. It shoots beautifully.

EOTECH ClipIR-ELR Mk2 for sale. Aside from turning it on once it has stayed in it's hard case, and is in unused condition. These units will come with the hard case and manuals that came from the factory. Happily willing to FaceTime and serious buyers. This will ship next day, fully insured.


$11,599