Selling a good used nikon black rangex rangefinder. Works great, no damage, a little dirty. Never had any issues. Comes with factory soft case and all that was in the box. Selling for $250 shipped tyd

Just got this scope with a rifle I purchased. If it was mrad, I would keep it.
5-25x FFP
Comes with Throw lever and front flip cap
Has ring marks
no box

Asking $375 shipped

6 Ruger 22mag/17hmr mags for sale. Used but in good condition.

$110 shipped for all 6

I'm just starting to look for a new scope, seems the XTR III is a decent scope. I see it for $1000 at EuroOptics. Do you guys know if this is a sale price or the usual street price on these (3.3-18X). If its a sale price, I might buy sooner rather than later. If it is usually this price, I will likely wait a few months.

Currently running the standard 419 mount on the K540, but needed a little more eye relief as I shoot a short LOP.
Received the 419 mid cantilever yesterday, and noticed the cant portion has some flex as that connection has a relatively thin profile.

Should I be at all concerned? I’m guessing not as the 36mm scope body will add rigidity?
Am I over thinking this?

Flame suit on (in case this is perceived as a newb question).

I’m primarily a bow shooter. Have been doing that pretty serious the last 8 years, but am getting into rifle shooting. Looking for a pair of good binoculars I can use for both archery and rifle shooting.

That said I don’t need anything too fancy yet. Maybe down the road once I get into shooting more. I want the vortex brand and have been leaning towards a pair of Viper binoculars. However the Fury has me intrigued (non ballistic. Just the regular 5000).

Does anyone know of the regular fury has a “bow” mode that will show an adjusted “distance” due to the angle of the shot?

For Sale: Like new MPA Vanquish chassis. Used for one range trip, but decided to stay with my existing setup.
- Right-hand
- R700 Short Action
- Tungston
- Competition (light) Buttstock
- Vertical 2 Grip
- Swept 3 Grip
- 2 Round-holder
- 2 NV Bridges with grip tape
- All standard thumbrests
- GrayOps Internal Vanquish Weight Kit
- GrayOps Side Rail XL Steel

SOLD

Asking $1500 shipped, PP F&F or MO. Add 3% for regular PP.

Have a year old pair of BLR10b’s, these binos have been awesome not quite sure why I’m moving them along but just going to try something else for now. Great condition, come with everything they did new. $1650 shipped. SOLD

March FX Tactical 4.5x-28x52 FML-TR1 Reticle 0.1MIL Illuminated Riflescope D28HV52WFIML-FML-TR1

Glass is in great condition. Some signs of wear on illumination circle knob and the elevation turret cap coin slot is a little buggered up ( you can see it clearly in pic).

First focal plane mil reticle.

Scope functions as it should.
Box, paperwork,

SOLD

Trijicon AccuPoint 1-4x24 Riflescope, TR24, Amber Triangle post reticle, Tritium / Fiber Optic illuminated

In very good to excellent

sold

SOLD This is a copy of the British M85 sniper rifle. Caliber is .308/7.62x51. Excellent, consistent accuracy, see pics below. Action is a Parker Hale 1200, with a Douglas Air Gauged match barrel, chambered and installed by LRI (Long Rifles Incorporated). Action has been blue-printed. The trigger is a Single Set trigger set at 1.5 pounds as a single stage and 8 ounces when set. To set the trigger, after closing the bolt, you push the trigger forward. To fire as a single stage, you just pull the trigger as normal after closing the bolt. The action has standard Picatinny rail mount. The stock is the uncommon molded in Desert Camo model and was made by McMillan for Parker Hale. There is an adjustable cheek piece. Some British Sniper's added this cheek piece to their weapons as seen in the picture below. The gun accepts AICS magazines and comes with one metal 10 round "Accurate Mag" brand magazine. The full length accessory rail accepts standard Anschutz and UIT accessories. This model does not have the spigot assembly for the Parker Hale bipod. The weapon is designed to have the bipod attached to the accessory rail. YHM suppressor ready brake is attached but can be removed. 5/8x24 threaded muzzle. Round count is less than 100, weapon is in like-new, custom built condition. Some small handling marks as can be expected from a gun that has been thoroughly tested. shipped to your FFL. No trades please.

The Parker Hale M85 is a British bolt-action .308 sniper rifle, with an effective range around 900 meters. It fires from a 10-round detachable magazine, and weighs 12 pounds, telescopic sight included. The rifle was created after the Falklands War by Parker Hale Ltd in response to shortcomings in the contemporary Lee–Enfield L42A1. Although the Parker Hale M85 manufacturing license was sold to Gibbs Rifle Co., it has not yet resumed production. History. The M85 took part in a British Army trial to see if it could be used as a potential sniper rifle, along with the Accuracy International PM, Heckler & Koch PSG1, SIG Sauer SSG 2000, and Remington 700. The rifle lost by a slight margin to the Accuracy International (adopted by the British Army as the L96).
The M85's range is about 600 meters and has an 85% first round hit capabilities from 600 – 900 meters. The weapon also has a silent safety catch, a threaded muzzle for a flash suppressor, and an integral dovetail rail that accepts a variety of sights. d. The fiberglass stock is made by McMillan.
ANSWERED QUESTIONS:
Barrel is 1:10. Yes, the action is pillar bedded with acra-glas with hex head action screws so you can set the bedding tension with a torque wrench. Barrel is 24.5", same as the original m85. Match chambered, and action blueprinted by LRI (long rifles, inc.), none better. Groups will tighten up with a better shooter than myself.

British sniper with an adjustable cheek piece added to his M85.

WTS/WTT: Trijicon Creedo 1-6x24 Scope Red 556 BDC Reticle (55gr/62gr)

$750.00 or Trade: 6ARC ammo

Lightly used, never fielded. Red illuminated reticle.

There is a very slight scratch on the power adjustment knob (the short stubby one that screws onto the adjustment wheel for magnification).

I will not reach out to you first. Please reach out to me on the hide via DM! Let’s keep scammers from getting involved!!

Regarding the picture through the reticle, keep in mind that the clarity issues are with me holding the camera up to the reticle.

[/B]

The box has seen better days... but the scope is packed well and ready to be shipped

I have a left hand Foundation MG2. Comes with Foundation full length Arca rail, Hawkins M5 DBM, Weibad cheek pad, and full Tungsten weight kit. This was originally inletted for a Vudoo but has since been made to fit a Deviant Defiance. I will not separate this kit unless the stock sells first. Only trades would be an MCS-TCS or a Greyboe Phoenix 2 SA.

Asking $1100 shipped.

Stock didn't fit me like I would like it to. Like new (only mounted action in it). Here are the specs:

PRS-TCS
DOUBLE DEAD TCS SHELL
REMINGTON 700 SA
PRS-TCSDBM MINI CHASSIS
PRS-TCS ADJUSTABLE BUTT SYSTEM
SWAMP MOLDED
PRS-TCS ALUMINUM ARCA RAIL
PRS-TCS FLUSH CUPS 1 LEFT 1 RIGHT 1 BTM
SIKES CLUTCH KIT (1 RAIL, 1 KNOB)
PRS-TCS ROUND ADJ BUTT SPACER .375"

$1200 CONUS. I can take a card + 3% or Venmo/PayPal. Thank you!

Also, please don't comment on my post (scammers will message you). Just send me a PM. I will go off timestamps. If you would like to talk over the phone to verify or FaceTime, no problem!

Looking to sell this bad boy. Comes with the box and scope caps, no rings or documents. Scopes in great condition and will upload more pics this evening when I get home. Asking 2500 shipped and insured. (I was sent the wrong color cap, a black one should be here this evening).

This was going to be a demo unit but didn't get around to putting it on a rifle. Like new (box opened for pictures).

SOLD $1150 CONUS. I can take a card + 3% or Venmo/PayPal discrete. Thank you.

Also, please don't comment on my post (scammers will message you). Just send me a PM. I will go off timestamps. If you would like to talk over the phone to verify or FaceTime, no problem!

MDT CKYE-POD Gen2 Single Pull Standard - Bipod

Great condition

Asking $sold

$40 shipped - order here
mcleodprecision.com

Small, low profile and unobtrusive ARCA rail. Common use would be a hunting rifle that you want to ARCA attach to your tripod or bi-pod.

Less that 1/4" thick (.2465") and less that 3" long (.290). 1.5" wide.

Exactly 1 OZ weight.

Built in "end stop" that provides a positive stop as you slide into a tripod mount.

Mount with 10-32 or 10-24 screws into MLOK slots or option in for the thread inserts in 10-32 size. When you order, select your hardware choice.

6061-T6 aluminum machined in my shop here in the USA. Cerakote Stealth Grey finish which goes great with any color chassis or stock.

Notes: Thread inserts require a #1 Drill and 5/16-18 TAP. EZ-LOK 319-332 is what I provide in case you want to look it up.

I have several of these Tangoinnos Fire 4000 Ballistic Rangefinders for sale in black only.
$1400 Shipped CONUS

https://tangoinnos.com/fire4000





https://tangoinnos.com/fire4000

Swapped out to a Bix. Bolt release is removed but is included.
$160 shipped

35mm MDT one piece scope mount, low height 1.18", looks fairly unused but has a couple minor dings, $195 shipped



Switched things up on my Curtis Axiom, selling the extra stuff

6.5x47 Lapua Barrel spun by Keystone Accuracy, 26" long, contour measures 1.2 down to .93 before the threads. has 390 rounds through it. $300 shipped\



Dillon XL650 strong mount and wrench holder, lightly used $80 shipped



223 Caliber conversion kit, missing locator buttons $80 shipped

Rugged suppressor M2 brakes, R3 flash mitigation, and 3 port brakes.
5/8 x 24
$85 each to your door.

Friend got an armalite ar10b when his dad passed.

He wants to use pmags in it to match other rifles he has.

He asked me if he could change the lower to work.
My initial searches it looks like the ar10b upper needs a modification to work with pmags?
So change the lower, AND modify the upper?
If that is the case then maybe it would be best to just buy more of the mags that fit the B and leave it as is?

Thanks for any input.

I have an ARC Xylo Long action chassis that I’m looking to trade for a different Long Action CIP length chassis.

Let me know what you have.

Thanks

I have a barely used (200 Rounds) LH Atlas Athena for sale for $4750 Shipped.
Comes with:
Acro and RMR plate
2 x Extra sets of Recoil Springs
Soft Case
Atlas Cleaning Kit
1x Magazine