RRS TVC-22i. This was a field grade buy from RRS about a year ago. Tripod has seen very little use. Couple scuffs on the center support but doesn’t impact functionality. No anvil or ball head is included. Will remove stickers before shipment if desired.

$725 to your door

My BBC loves to be stroked, sometimes gently, sometimes he likes it rough.

My Beautiful Black Cat (Harley):



Gorgeous Julie:

Some barrels I'll likely never shoot/shoot again.

AXMC Brux 1.350 Stainless blank, M30 threads
6.5 PRC SAAMI chamber by a local smith (Young's Gunsmithing – Sand Coulee, MT)
29" finish
Heavy Palma
5/8x24 Muzzle Threads
7.5 Twist
48 rounds fired
$595 plus shipping OBO

AXMC 6.5 PRC Chambered by MHSA, M30 Threads
specs on invoice
10 rounds fired
$925 plus shipping OBO

Unpictured, but also available is a Brux 8.5 twist in 300 Norma,
HV Contour
Cerakoted Pale Brown
29" long
3/4x24 muzzle
142 rounds fired
SOLD

Nucleus Prefit – Unfired
6mm Creedmoor
Sendero Contour
5/8x24 Muzzle Threads
22" Finish
8 twist
Chambered by Fisher T&C
Preferred Barrel Blank – stainless
$395 plus shipping OBO

Please use PM for additional communication. Thanks for looking.

All pieces and parts, sans action and barrels were sent to AINA for correct green Cerakote. It has the low Anarchy cheek piece and thumb rest. Standard trigger with flat shoe. I have a competition trigger I can replace it with if buyer prefers.

Small firing pin modification by LRI.

Additional weight from AO kit and the NV bridge are included.

Looking at a criterion prefit shouldered barrel for a Zermatt action chambered in 223 Remington match with a 1:7 twist. It will be fed from mdt .223 aics mags. My question is will this chamber shoot 69gr/
77gr SMK loaded at 2.26” just fine with the .090” freebore? I also intend to shoot heavier reloads which is why I am leaning towards the match chamber vs the Wylde. Anyone have experience with this?

Login to view embedded media

Another corrupt MI prosecutor with help from the MI State Police arrested , manufactured evidence, and kept a man locked up in solitary for months - McMasters has been awarded $60 million.


No word on if the pigs and prosecutor who manufactured a case against him will go to prison. Probably not ; cause hard job and such reasons .

Armageddon Gear High Heat Cover. $55

Hi guys and gals,

Over the next month I will be putting together my .45 Raptor bolt action hunting rifle. I have some reloading supplies on hand and some on the way presently. I am looking for any tips, recommendations, and cool load info that anyone might be willing to share.

Let's see those recipes!!

I very much appreciate any help that is given.

For sale or trade

Sharps Bros heatseeker chassis for Ruger 10/22
Mlok forend
B5 grip
JP buffer tube
FCD castle nut
No stock but I have a few I could sell if you need one

Less than 6 months old excellent condition
Awesome chassis but I needed a different style to use my clip on

I have the factory box and paperwork

$325 shipped
$450 trade value


Trade interests +/- cash
Winkler belt knife
300 prc ammo Or reloading components
300 black out AR barrel , 8-10"
Mk18 handguard
55-65mm TVT ball head
Ruck
????

Brand new Geissele super duty upper complete. Mod 1 14.5 pin and welded. Mk 16 rail. Airborne charging handle. Nano bolt carrier group. 1150 shipped.

So I'm a noobie...I'm looking at the PTR Vent 1 762 suppressor. It comes as a direct thread to the barrel. I called PTR and they said I could use a muzzle break setup as long as it doesn't protrude into the suppressor more then 1.5 inches. So I'm looking for advice on which muzzle break to use. Also. I wanna switch the suppressor from my pof 556 to my pof 308. They both have different threading. How/ can I do this? Please help lol
Thanks
Ed

Looks like hackers have been in the State's System for 100-200 days before triggering Mondays event. Maybe coming to your State next?

Discuss

Hey folks, joined a few months ago but I've been lurking more on Rokslide for the hunting info. Figured I should introduced myself. Newbie from NV. Got into shooting just about a year ago with a 44 mag Henry X and things have escalated to say the least. Too many other pew pews have joined the safe alongside a couple suppressors, a decent reloading setup for all the calibers, and getting ready for my first hunting season (mule deer) in October. I've learned a ton in the past year, and I'm here to soak up more. Glad to be here!

Brand new. 24” 1:7 twist rate 1.200” diameter barrel threaded 5/8x24” at the muzzle. Weighs right at 7lbs. Outlier stainless blank that was chambered by Fischer t&c. Specs are in pictures. $600 shipped priority mail. Venmo preferred, ppff is fine also. Thanks.

This was pretty good. It's always about the money. And freedom. Too much cheap energy breeds too much freedom.

Enjoy.
Login to view embedded media
Login to view embedded media

Greetings, I have a buddy looking for a handheld thermal scanner - prefer 256 minimum, 384 better, looking for a $1000 or less, 18650 or internal recharge preferred over 123 systems.

My intent is to use my Terminus Zeus Long Action (QC) with various barrels in order to shoot both short action and long action cartridges (.308, 6.5CM, and .300PRC). This would enable me to save money by using only 1x action and 1x scope, and having the ability to freely change the chassis/barrel combination between a heavy range configuration (MPA chassis + steel .308 barrel) and a lightweight hunting configuration (MDT26 chassis + carbon fiber .300PRC barrel). I know that we have precedent in the military for LA systems running short cartridges (M24), and ideally it would be similar to our Mk 22/MRAD running .300Norma or .308 just by making use of the proper magazines to ensure reliable feeding… I just need help understanding how to best do this on my personal gun making use of AICS compatible folding chassis systems (I prefer these over stocks).

I’m looking for feedback from everyone on:
(1) descriptive feedback from any shooters who have tried the “ Accurate Mag AICS .308 LA Magazine “ with short action rounds (ie whether I will encounter reliable feeding without issue).

(2) any recommendations for which AICS magazines or mag kits I should acquire in order to reliably feed short action cartridges like .308 into a Long Action (Zues) within a modern chassis system (MDT HNT26 + MPA ESR) if the aforementioned Accurate Mags are not ideal.

Amplifying Information:
**I have seen the Barbour Creek videos with James running Hawkins Precision 30-06 magazines to reliably feed short-action 6.5CM into a long action Terminus Zues… but the employees at both Barbour and Hawkins have communicated on the phone that this is only compatible via a stock with bottom metal using the m5 inlet, and my intent is to use chassis rather than stocks (specifically, MPA ESR and MDT HUNT26). MDT said that I would need AICS compatible 3.850 CIP magazines.

**I have read through the forums for months and encountered conflicting information and mixed word on whether or not the Accurate Mag listed above are a reliable, malfunction-free solution… “Islas82” seemingly communicated Initial Success with these accurate mags beginning 29NOV2024, but then Likely Failure due to feeding issues on 02FEB2025.. supposedly even “ rlsmith1 “ had used these accurate mags for short actions into a Long Action as well… if anyone can provide additional updates or new information, I would appreciate it. I would like to hear if anyone has experience with running .308 thru the LA Accurate Mags into the LA Terminus Zues.

*** I saw the thread on magazines being made with a spacer linked by Tyler Kemp, but it seemed unresolved to me and currently unviable for my use case (.308 capability in my Zues LA which has a lightweight .300PRC MDT26 configuration and heavy MPA .308 set up). Please advise if there is another currently viable, well known magazine option for short calibers in long actions… specific to AICS compatibility.

**** Some additional consulted resources so that others know I’ve done extensive research before posting this thread: Thread 1 / Thread 2

Couldn’t find a way to DM/PM some of those individuals, so hope that posting this casts a larger net for potential sources of information with applicable insight/experience. Thank you for your time.

Mint condition 30MM Max 50 scope rings (6 screw). $115 shipped. These are part number 306-11 (steel).



Description from Badger’s website:

The Badger Ordnance MAX-50 Standard Scope Rings are one inch wide, giving them 60% more holding power than any other ring available. They utilizing six #8-40 Torx® screws to distribute the load and providing the maximum amount of holding power while minimizing the chance of scope damage. Machined from Ordnance Grade Steel and Black Oxide finished.

i was slowly coming back as a viewer from their allowing kneeing but now they are back on the no watch list for playing some non american hoodrat anthem at the games start before the american anthem ....if they played a rap song i would not be surprised

GrayOps Mini Plate and pad. Both excellent condition. update....pad is sold. mini plate $100 shipped.

Zelle or Vemno preferred.

Very nice Burris PEPR mount for 30mm tube. $50 tyd.

I have been in the buy sell pages for a while but figured I would ask here to see what you all think. I see small batches (~100) mostly coming up and am interested in opinions regarding lots of 500 or more

I am considering loading virgin brass and then selling it once fired for my PRS rig. (Save time on annealling, cleaning, etc). I have a few buddies that will most likely join me and as such we have enough buying power to get dealer status at Grafs.

My question is not about firing virgin brass but if there is an accepted price margin for once fired? If Peterson Dasher, as an example is 1.19/case new, is .95 a fair price? Thoughts?

We would be selling 6x47, dasher, BR, and 6GT

Remington 700 308 16.5" barrel Hogue full bed aluminum stock. Shoots great just thinning the safe out some. Has magpul bottom metal and 1 aics pattern 5 round mag. $750tyd


SOLD

Hey everyone, just starting to load for my new 6.5 Creedmoor I picked up last weekend. It's a custom build Surgeon 591 with a 24" Hardy CF barrel on it. I took it to the range the other day and fired some Federal GM Berger 130gr rounds through it to break in. Took about 10 rounds before it settled down and I printed a 1" group at 100 yards. Not super impressive but I'll chalk it up to being the first rounds through the barrel, and the ammo being from different lots.

Now I'm looking to start some load development with virgin Lapua brass, Berger 130gr OTM Hybrids, and H4350. I'm planning on ladder testing from 41gr up in 0.3gr increments to find a load it likes. Just wondering what everyone else is running with this combination in terms of powder charge and distance off the lands (is there a certain distance these bullets like?)

And before anyone jumps down my throat, I've check the 17 pages of loads on here but there really is not much for 130gr bullets in Lapua brass.

Looks like Vortex is teasing their replacement for the Fury HD AB. Seeing as that product is no longer listed on their site, this might actually release soon? Looking for some good ballistic binos and I don't want to give Sig any money. This might be the ticket.