Hi all,

Getting back into the LR wagon and I've been eyeing the Bergara B14 HMR 6.5 Creedmoor among others that would be of similar quality and cost. What do they typically go for used?
Thanks for the help.

Good condition Badger unimount
Cantilever mount
34 mm with 30mm inserts also
Overall good shape
$160 shipped

May also trade for a nice brake in 5/8 x 24, for a 7mm or 30 cal

Mags to fit a Tikka 7 prc

Towards a Nice trigger for a Tikka

6.5 PRC ammo

7 PRC ammo

luckygunner still has it and @ .46 per tela FMJ all the way up to 2.50 per US made . Tela is magnetic and non corrosive

Thought some of you might be interested in my Israeli Defense Forces Mauser M-66 SP sniper rifle in 7.62 x 51 (.308 Winchester). Almost all of these rifles were produced in 1980 on the commercial Mauser M66 short action. There were only 360 of these rifles produced. This particular one was used by the IDF and then sold to Springfield Armory who retailed a small number. I purchased this gun from the collection of actor James Earl Jones. This particular gun has the Nimrod 6x40 scope. It is also shown with a Zeiss Orion 80/I (Fero Z51) Night Vision Rifle Scope.

As a design the M-66 SP, like many sniper rifles traces its roots to a civilian sporting rifle. The action was designed in the 1950’s by Walter Gehman, world record setting German “Master Shooter”, expert ballistician, and small arms engineer. Mauser put Gehman’s creation, known in Germany as the “Gehman-Short Action” into production in 1965. In 1971, German police, like many other law enforcement organizations at the time, began to search for weapons, create tactics, and form units to fight terrorism. The bloody attack by Arab terrorists at the 1972 Munich Olympics caused Mauser to design a precision sniping version of the M-66. After eight years of development the weapon was ready to be put into production and was designated as the “SP” variant of the M-66. All M-66 SP rifles had to group five shots in a two-centimeter diameter group at 100 meters. Only 360 of these rifles were produced with almost all of them being manufactured in 1980. Mauser suspended production of all M-66 rifles in 1995.

I’m looking to rebarrel my old Tikka T3 243 into something to use as my ranch rifle/truck gun to keep in my rig daily. I’d like it to be as short as reasonably possible, and I’d like to use factory ammo just for the cost and convenience in a gun that will be abused and fired a lot. I’ve got a peak44 stock on the way and a Leupold VX3 that’s been waiting to be put on something. The cartridges I’m looking at as of now are 6CM, 25CM, 6.5CM and of course good old 308. Open to other chambering suggestions as well. Duties will include dispatching coyotes, feral hogs, and whitetail if the opportunity presents itself during season. Likely maximum range on live targets will be 400 yards just given the brush and topography of my place. I currently use a 22CM at 22” but I’d like it to be a few inches shorter for getting it out the truck window easily and quickly. I’d build another 22CM shorter but that’s boring. Rifle will be suppressed full time.

Yes I realize I’m giving up performance with factory ammo and a short barrel but this tool isn’t going to be about maximizing performance, it’s about easy handling and being capable enough to be useful. I know there’s plenty of posts about short barrels but I’m looking for experience specifically with factory ammunition. So who’s running factory ammo in a 16-20” rifle, what cartridge and muzzle velocities are you getting? Have you seen good kills on small to medium size game with your setup?

Good Essay on the message in this 1993 movie and how it relates to current times.

Login to view embedded media

Nearly 2.5 MILLION people have signed a petition supporting the ftard illegal alien responsible for the deaths of 3 people when he tried an illegal u-turn on a highway.

I watched the in-cab camera of this guy as he was trying this idiot u-turn. His expression does not change one bit as he realizes that something has just hit his trailer.

Unbelievable

300 Win Mag Redding Type S Bushing Style Full Sizing Die, #77153, new, plus upgraded Hornady lock ring. $45 tyd. PayPal or Zelle preferred.

I noticed that March has posted the complete specs for these two LPVOs at their website. FFP and Dual Reticles.

My understanding is that all -F and -FX riflescopes have 34mm tubes with 4mm thick walls and that's why the new 1.5-15X42 FFP/DR and the 1-10X24 FFP/DR now have the -FX in their names.

Dual Reticle:

FFP

Like new, it’s been well taken care of, got a new one as a gift. $475 shipped.
if interested, message me.

For sale razor gen 2 in mils comes with sunshade, tenebrex covers and throw lever. If you want the rings that will be a additional 200 bucks.

1550 shipped

PayPal friends or family or u pay the fees or venmo

2 new mags . Both feed fine from left side but right side nose dives and hits from by of mag.

Discovered while shooting match. But do it when unloaded by hand also.

Anyone else having issues ?

Anyone looking for a handcannon?
Look no further I have the cannon for your hand.
Desert Eagle 50AE
L5 5" Inch Barrel
2 Tone Brushed Chrome & Black
Comes with box and 1 Mag
Not showroom new, but in good shape

$1300 Shipped to your FFL

Venmo, PP F&F, No Trades

Just got an email about their newest action and newest complete rifle. Looks pretty nice with good features. Who will be the first to test them:

Rifle: https://faxonfirearms.com/firearms/bolt-action/complete-bolt-action-rifles/

Action: https://faxonfirearms.com/firearms/bolt-action/bolt-action-receivers/

I freakin' love competition and new companies really taking the plunge!!! Good for everyone.

Ok so this is a stretch and a bit of just playing around. While messing about on Chat Gpt I gave it a proper asking it to create the most ballistically superior cartridge that will fit in a mini length action (Howa mini/ CZ 527) in the 6mm bore size. And it came up with one called the 6mm mini short magnum or 6mm msm. These are the theoretical specs it created:
Concept: A radically shortened, fat-body “WSM-style” case (~1.60–1.65" case length) with either a rebated rim (.445" to use Grendel bolt) or a true magnum bolt face (.532") if your mini action can be re-bolted/opened up. Seat 105–115 gr bullets to ≤ 2.30–2.35" COAL.

Sketch specs (target values)

• Option A (rebated): .445" rim, ~.530" body, 35–40° shoulder
• Option B (mag face): .532" rim, ~.550" body (bolt/lug thrust rises a lot)
• Case length: ~1.60–1.65"
• COAL: ≤ 2.35" (you’ll need custom magazine/follower)
• Capacity (gross): mid-40s to low-50s gr H₂O after seating

Potential performance (24")

• 115 gr class: ~3,050–3,150 fps possible on paper
• 105–110 gr class: ~3,150–3,250 fps

I basically want to know how possible this is, can it be created from an existing cartridge like 243 wssm, and should I build one for shits and gigs instead of a 6mm ARC. My thoughts: if I’m already going to pour money into a full custom rifle with dies and components for the ammo why not go all out? Main downside for me is no factory ammo available, and possible feeding issues. I wouldn’t mind going to a short action but want to avoid just jumping for a 6 prc or a 6 creed just because I want to be difficult on myself.

I guess we will see if it actually happens and what files/information will actually be released to the public.

Login to view embedded media
https://www.thegatewaypundit.com/2025/03/breaking-trump-announces-jfk-files-will-be-released/

Looking for a donor action for xm3 build. S652xxxx to S655xxxx would be great. Also any related xm-3 parts I would be interested in

Chisam

Selling 3D printed thumb rests for the MDT ACC. Printed out of PETG, which has great chemical and impact resistant properties.

Attachment to Chassis:
- Option 1: Using the provided double sided tape (Preferred method)
- Option 2: Remove plug that provides accommodations for a 10-24 screw (Requires tapping your chassis and recommend using double sided tape as well)

Whats Included:
- Left hand, right hand or both versions of the thumb rest. (Please Specify when messaging me)
- x2 double sided tape
- x1 10-24 screw
- Alcohol prep pad

$25/shipped

I have a 6 dasher PRS style build I’m looking to get a scope for. Looking at the ZCO527 and 840. For those that have handled both is there a preference between the 2? Which is “better” overall in your typical shooting magnifications (15x-20x) the lower end doesn’t really matter and the higher end of the 840 is only beneficial on paper or ELR spotting which is cool. Price weight and length are not a factor. Looking at the PRS blog the 527 was more popular but the shooters in the top 10 were all running the 840, I am nowhere near the top shooters but seeing what they run is pretty cool.

Looking for an Schmidt and bender USMC 8541 marked 3-12 power scope or a civilian scope with Gen 2 mild dot reticle MTC turret or double turn elevation turret scope

I’m selling out all of my PRS equipment . Nothing wrong with it, I just don’t have time, patience or the love for it anymore.

I’m not going to post pictures of everything being there is going to be a lot.

I’m also going to post stuff in 2 or 3 different treads so I don’t lose track of what sold and what needs shipped.

I will honor the first “ ILL TAKE IT” by PM only. Just trying to protect everyone from scammers.

I’m am completely willing to send pics and video chat with the buyer.

Payment preference is a money order!! I do have PayPal but I prefer not to use it

LETS GET THIS STARTED!!!!

#1 complete PRS rig $6900 chassis and trigger sold
SOLD Impact aw cut $1200
SOLD Bix two stage
SOLD6 dasher Kreiger HV 7.5 tw 130 alpha $400chamber ( shoots amazing)
SOLD MPA matrix pro 2 with full weights in and out. Has grey ops XL weights out
SOLD Zco 527 MPT 2 15 mil turrets and a spur 6001 sun shade and caps $3200
SOLD crush it timer
SOLD MDT send it with Brandt build
APA fat bastard
SOLD Grey ops bag stop
I am willing to part out this rifle

SOLD#2 2- Botnia MAXI 6.5 brakes $500 each shipped

SOLD#3 AMP mark 2 DB $1500


SOLD#4 ZERO PRESS $1400
It has 2 turrets, a 419 riser, trays for the back and it has the ram that you can change out the spacers

SOLD#5 Henderson GEN 3 trimmer powers $700

SOLD #6 giraud power trimmer $450
Needs a new shield around the cutter head
Case holders— 6.5 PRC, .223, 6 creed, 6 Saum, 338 LM, 308, 22 creed, 300 WSM, 6 dasher
Extra 6mm cutter head

SOLD#7 roughly 3300 115 DTAC uncoated $1020
35733 lot. All the same

#8 Berger 109 HT roughly 1300 $624
Lot 3636

SOLD #9 impact AW action $1200

#10 alpha brass 6 dasher
SOLD 300 virgin $120 each
SOLD 200 same lot as above. Some loaded and some 1x fired ( loaded 30.4 varget 109 ht) $200 all
SOLD Roughly 1000 2x fired. Same lot. Ill count but I’ve lost a few at matches $750
Roughly 1000 3X fired. Same lot. $650

SOLD#11 300 Peterson 6 creed. Unopened. $250

#12 Leofoto summit LM-364C with telescoping added and a cheap head $450

#13 2 vets QDT V2 with two vets head. $800 419 clamp ( used 3 matches)

#14 swaro NL PURE binos $2600
Has RRS arca


SOLD#15 OTTO noise barrier $275

#16 grey ops aw mags $140 each
SOLD2- BR mags
SOLD2- GT mags ( works great for dasher)

SOLD#17 cortina 6 dasher dies w/ bushings $230

#18 21st century hydro press 160 psi $370

SOLD# 19 Dillon 650 all set up to mandrel, prime, dump powder, feed bullets and seat bullets. $1700
Prefer not to ship.

SOLD#20 varget roughly 10 lbs same lot $450
Pick up only

#21 RL16 7.5 lbs same lot $350
Pick up only

This will be posted in multiple places. First come first served.

I have a thing for BDC reticles. I like how I don't need to think or make any calculations, I just aim accordingly. Add on wind holds, and I get even more aroused. Maybe it's because I'm a dumb Marine and popped my cherry with the ACOG, but it's just who I am.

So I've been looking for the "perfect scope" for one of my rifles, and I ALMOST found it, a Nightforce 2.5-10x32 with a reticle that I didn't even know existed, the Velocity 600. Unfortunately, the one that I found is the high velocity (HV) reticle, and for 308 with a short barrel, I'm looking for the low velocity (LV) one. Several years ago, this would be easy to locate, but now it appears to be discontinued and gone from everywhere. I called Nightforce this morning, and was subtly laughed at for being stupid and not just adopting mils.

Anyway, does anyone know where I can find One of these old NXS 2.5-10x32s with the Velocity 600 LV reticle? I feel like there's got to be some on a shelf somewhere, or some old hunter who uses something more modern nowadays.

Let me know your thoughts!

Brand new never used/mounted. Comes with original packaging and has quick release lever.

$200, now $150 shipped.

Plans for this rifle changed by the time I got it back from the 'Smith. Im looking for something that meets NRL Hunter power factor.

New, zero rounds fired. Only the barrel is for sale.

18" XCaliber Carbon
6mm Creedmoor
1:7.5 5R rifling
5/8x24 threads
Measures 1.040" at the muzzle.

Over $950 in it, will take $700 $600

Open to trades for TL3/Origin barrels, 6.5mm or larger.



Pre-chamber Job: