New never used
Part number W080KSX
$65 shipped
Zelle or Venmo

40% off cert. $400. Can mail and/or email cert after purchase.

Thanks

I got this on a trade and was told it was a Timney 510 trigger. I used it for a little while on my Bergara b14r but recently sold it also so I don’t need it. $120 shipped.

Impact SA NBK 33rds on it
20" 300wsm 3b bartlein 9 twist 33rds
18" 7 SAUM CRB barrel - hunter contour - BMP did the work - threaded 5/8"-24 - 126rds
Foundation Gideon SA - impact inlet
TT special Two Stage Flat
Hawkins Hunter Dbm w/mag

$3500 for everything. (Minus optic and bipod)

Only trade interests would be a 223 or 6.5prc tikka BA, Or Swaro SLC 8-10x. Or a trip to Japan, lol. Wife wants to go next April which means booking right now. It ain't cheap.

I just found out that it is supposed to be released to theater's, in April. Anyone else heard anything about this one?

(I tried posting this from the "Movie Theater", but I dunno what happened.)

Just been playing around with the 3 to really figure out the best applications for pairing and each. I really wish you could use the Kestrel and Sig at the same time in ABQ but all is good.

5700X is version 2.2 and ABQ is updated to 3.4.4

A couple issues I'm currently running to @DocUSMCRetired. Currently my when connected to my 5700X, I cant stream wind? The kestrel symbol on the bottom us blue and the wind speeds are grayed out, but no response. 5700 is also in Live.

I also cant hit the LRF icon to pull T/H/P from the Kestrel.

Clarification question, what is "Auto Length" in regards to Bullet Data?

Cleaning out the safe to fund new projects.

Performance Center S&W 986, 9mm with 2.5" barrel. Original case included.

$900 $885

Ok .308 folks, I am ready to dive back into reloading after a decade of factory ammo (FGMM/PRIME), in anticipation of our local match season about to start.

One problem: I am very short on time and won't be able to OCW.
So I plan to load @x120 of one specific load and shoot x20 for chrono+zero, and use the rest for a match. That's all the time I have.

So, my Question: Are there any favored or predictable nodes and loads for 175smk and 185 jugs with 2000MR I should start with?
I'm feeling safe about starting with:

46.0 gr 2000MR with 185 jugs at 2.83", and 47.0 2000MR for the 175smk at 2.83", since Alliant publishes 47.7 for 175smk at 2.8".

I have a 24" M40 Bartlein 1-10 twist 5R on an Impact barreled action from Altus, and it shot PRIME 175 and FGMM 175/185s well last season. I have not yet measured the shoulder length, but I'm using AICS and MDT mags with plates in them, so 2.83" should be my max OAL. Most of my brass made it home and is clean and ready to size, and I have 8lbs of 2000MR and will be using CCI200 primers in the FGMM and PRIME x1 shot brass and some new Lapua.

It sucks to have so little time for reloading, but kids, work, life, etc.--I'm lucky to shoot at all these days. I'm hoping you folks using similar 2000MR 175/178/185 loads will post up some numbers or cautionary tales. My endgame here by batch reloading without OCW instead of buying more factory ammo is to gain the extra fps that 2000MR gives over Varget and factory boxes.

TIA HIDE!

Hey Guys,

So I picked up a lever action .357 mag as a fun steel target gun and now I want to put a can on it. I am pretty confused about what 7.62, 36 cal, 9mm cans working with .357. Form what I gather .45 can is the proper guaranteed to work way to go but of course I don't own any .45 cans. I recently saw with a quick google search that that someone was running an Enticer Ti on a .357 lever gun and by chance I have an Enticer Ti but im to scared to try it as logically .357" is larger than .308" I also have a 9mm can and these seem to be alot more accepted for 357 use but still technically 9mm is a hair smaller than 357. I also have a Hux Flow Range 36 in jail.

So I guess my question is what is the proper size can for a 357? and can you get away with a 36 cal can or 9mm can?

So I have an issue where my ejector plunger on the bolt seems stuck. It was ejecting rough today at the range so I tore it down to clean everything and I pushed the plunger down on the ejector and now it won't come back up thus not ejecting brass anymore.

How do I get access to the plunger to take it apart and clean etc? Also do you just apply oil to the plunger to keep it lubed?

Want to buy Bix & Andy Pro 2 Stage Flat Trigger Remington 700 . Pm me.

brand new in box

Leupold Mk4HD 6-24 PR2 Mil

$1150 shipped

I take Venmo, Zelle and Apple Pay, can do PayPal if need be but prefer not to.
F&F payments only

5.56 Ruger RPR with all the Anarchy Outdoor Upgrades. Arca Handguard, steel bolt follower, v grip, will come with OEM Brake. Lightly used 500 rounds on barrel.

Rifle Only $1,100

Viper PST 2 5-25x in Vortex Mount $800

$1750 as a bundle. No Trades.

I have a new Carbon Six barrel for sale. I had 2 made and am selling one to put the money into another project, I need a KRG C4 long action chassis.

For sale:

Otto NoizeBarrier micro in-ear hearing protection. These were used very little, less than an hour. They work great, but I prefer over the ear. Includes everything that comes with them new including the manual, charging cable, extra silicone and foam plugs, and original box. I threw away one set each of the silicone and foam plugs that I had used with them, so all of the plugs that are included are new.

$325 shipped SOLD

I accept discreet PayPal or Venmo (F&F ONLY)

Thanks for looking!

Larue 16” AR10 - .308
88 rounds recorded 168 FGMM

Comes with extra 14in barrel with one box of 168FGMM through.
Also comes with proper hand guard to fit shorter barrel. Tan furniture grip/stock. Three mags.
Selling due to unexpected heart procedure.

Shoots lights out!

$4,300 for all listed

My dad had this to put sights on his Glock and it has not been used more than one time. It still looks like new. He paid $75 for it and I will let it go for $55.00

Lefty Vudoo v22 360. 30 MOA rail. 26inch barrel chamberd by Vudoo. I think its a Bartlein barrel and the contour is 0.90 from the breach to the muzzle. 4000 rounds on action and barrel. ATS tunner included. Triggertech Dimond straight included. 2 Vudoo mags and 2 LRI plastic Mags included. Brand new bolt stop included. Original firing pin spring included. Stiffer spring installed from Vudoo for cold weather reliability.

$2100 shipped and insured. Your FFL must except from individuals.

No trades please.

Selling my Zermatt Arms TL3 16.5 inch Carbon Fiber Barreled action in 6mm Creedmoor.

16.5 inch 1:7.5 twist CARBON FIBER PVA Chambered Osprey Barrel (230 rounds) on the barrel all factory Hornady. Regularly getting .5 inch groups with factory Hornady 80 grain ELDVT.

The action and bolt were professional cerakoted in FDE by LTM Refishing. The barrel was professional cerakoted in FDE by PVA’s

SOLD

$OLD

20” Proof barrel 1:7.5” twist (200 rounds through barrel) willing to trade for 20” Proof 5.56 barrel

.750 riflespeed gas block

Rexus 6 Arc bolt

2x 15 rd duramags

Looking for a March-FX D10SV24FDIMLX with DR 1F reticle.

Double rifle pouch with gap, single rifle pouch mid length, 5.56, Multicam, EXCELLENT CONDITION, $45 shipped, DISCREET PayPal F&F, no trades.

Would any of you guys know someone that has a set of 34mm vertical Larue rings or where I could find some..? I know this isn't really the right place to post this but I'm a new member here and can't post in the buy/sell group yet...Thanks

New never used
$old shipped
Zelle or Venmo

XLR Magnesium 4.0 Chassis with folding stock adapter, bag rider, and MDT Elite grip, will include the XLR thumb rest which is not in the pictures.

Chassis was professionally cerakoted by LTM refinishing.

Chassis is in great shape but does have minor cerakote wear on the Arca rail from tripod attachment and minor wear on the cheek riser see photographs.

Weight on my digital scale is 2lbs 7.8 ounces as it sets, but I will admit the MDT grip is rather heavy in comparison to the lighter grips options.

SOLD