This kit helps eliminate the stray powder kernels during hopper loading of the SuperTrickler and clearing out the hopper without having to shake the unit and try and open the trap door with one hand while holding over a container.
The funnel is a very light press fit into the top of the SuperTrickler by way of having a 3 deg. taper on the mating diameter.

Form fit and function tests were completed by another SH board member, I have several units printed up and ready.
Complete kit- 75.00 shipped Priority mail ( includes the baffle assembly)
Funnel and lid -20.00 shipped USPS
Powder Tube catch -18.00 shipped

Selling the following items:

10x42 EL Range TA Orange $2,800.00
12x42 ELs $1,850
15s SLC $1,800
STS 65 20x60 eye piece $2,000

I only got about 70% but I havent had TV for years so miss a lot of news.

new quiz here.

Used Burris Veracity 4-20x50. FFP Moa. Has some ring marks. $325 shipped.

3d printed mag flags. All of them prevent the bolt from being able to move forward. I make these in AICS short , long , long cip mag length, AICS RIMFIRE , AR15 style , ruger 10/22 and CZ 457. I make them with shock cord to wrap around your bolt to eliminate the bolt from flopping around except for the ar and 10/22 style. The CZ 457 I can make with or without shock cord . Aics style are purposely textured on the lower ends for added grip.

Any aics and ar style - $28 shipped

Cz 457- $22 shipped

Ruger 10/22- $22 shipped

Buy two or more and receive a discount!

I accept either PayPal or Venmo

Like the title says I’m looking for a carbon T4A Team in black/black. Will consider other colors. LMK what you got. Thanks.

Doubling down on my previous post tonight about "manly" things-

I'm finishing up on applying leather conditioner to my "fine leather goods" & one of which is my wallet in which I took everything out off prior to applying the leather conditioner... A handful of credit cards, insurance cards, and membership cards to places like the AL & VFW, my total amount of actual cash was a whopping $6. That's one $5 & $1 bill & that's all I had.

This is a bit "wild" to me because 20 years ago I would have felt absolutely naked if I had anything less than $200 cash in my wallet. $200 now is worth significantly less than it was 20 years ago and $6 wasn't much money even then either. But I really don't use cash these days...

Anywho- I'll have to hit the ATM or bank and replenish my cash reserves but the question posed is whether anyone else is surprised with how little cash they carry/use regularly as compared to what they used to.

-LD

$4500 for the upper
$1500 for the lower

Willing to negotiate. Message me and we can work something out.

As the title states looking for any of these sr25 models. Highly prefer unfired with test target. Unless it’s a delta of course. Let me know if you have anything.Thank you for your time.

I have several of these. New in package NSN# 5995-01-454-7124. Pressure tape switch. See pics. May fit others. One buyer said it worked on his PEQ-18A and I suspect others. $15 shipped

Want to buy a knights armament SR25 ECC or EMC. Would also consider an EC.

Any Auto Techs here? My buddy's 17 year old kid just cross cabled a jump start attempt. He quick pulled the cables, put them on right, got the car started, but the car will only idle and drive at about 3 mph- I read about something called Limp Mode?

Anyway, he said the battery tested good, he can run the A/C, but the engine ignores the throttle position because he thinks the computer has locked out the throttle as a precaution?

TYIA

For sale is a TRC M-1 SL in M390.

Never used
comes with box and everything

Asking $315 shipped paypal friends and family (if goods and services, then $364)

ELR kit
I had some help selecting this setup from one of the great elr shooters of our time. He said order the action with 2 bolts and you can set your rifle up “switch barrel”. This gives one the ability to run both 375 Cheytac and 416 Barrett on the same rifle with just a barrel vise and some go/no go guages. The included blank supports .375 Cheytac/Enabler territory.

BAT EX 2” action stainless

Bat Action wrench (not in the photos)

Cheytac bolt, stainless fluted

BMG bolt, stainless no flute

Bartlein 8 twist 375 blank 1.75-1.50” muzzle for 36” finish length (37” now)

Terminator T5 muzzle brake (1.5”) .375 cal
I went with 7/8 24 threads based on advise from Mile High about this thread pattern being optimal for the new TBAC 50 cal suppressor mount

Bix n Andy Comp trigger w/sear insert


$5500 for all

buyer covers shipping from my FFL to your FFL

I also have a Manners LRT 2.0 for Bat Ex with both weight kits, prism rail, in Elite Plains high gloss on order that will be finished mid 2025. I had plans to cerakote the action bronze to compliment the stock colors. It is not paid for but will cost approximately 3k if you want it.
I will pass it on to you at cost when it’s ready if you like.

*photo of manners stock to show color pattern

it worked and saved lives

Full power but NOT unlocked RAPTAR. It does NOT have AB. Very little use. Can be unlocked for full power vis/ir/ir illuminator. Includes all original accessories

$3500

Have a nice set of Knights BUIS. 600m rear. Sorry for the super close photos. But I guess you can see what you’re getting. $225 shipped for the set. Can pull them tomorrow and send a photo with both of them in it if needed

Listing for a buddy

Used but in good condition

$375 plus shipping CONUS

AB Quantum 3.3 Major Update:

1. Added new devices AB Quantum can pair to:
   • Calypso AB Mini.
   • Tango Fire 4000.
   • All Devices Previously Supported by the AB Synapse – SORD App
   • All Devices Previsouly Supported by the AB Synapse – BOSS App
2. New Remote View for compatible devices.
3. Improvements to navigation bar.
4. Full Calypso AB Mini Support
   • Pair with the device
   • Update the device firmware
   • Manage the pairing between the device and laser rangefinders
   • Added more devices the Calypso AB Mini can pair to:
     • Sig KILO8K, KILO10K devices (firmware update required – April 15th)
     • Envision MARS Units.
     • Wilcox RAPTAR Xe & MRF Xe devices.
     • SORD compatible devices.
     • BOSS compatible devices
     • Leica Geovid (firmware update required – April 15th)
   • Note: The Kestrel 5700 AB devices can now pair with the Calypso and receive live wind speed and wind direction updates in the Kestrel. This is an independent function, not through AB Quantum. Requires Calypso FW version 1.22 and above.

iOS version available immediately, Android available as soon as Google approves it (24 - 72 hours).

How to Navigate AB Quantum 3.3:
Login to view embedded media
AB Quantum 3.3 Overview:
Login to view embedded media
Using Calypso AB Mini with AB Quantum:
Login to view embedded media

Has anyone used one of the Powder River Precision 10/22 receivers for a build? I saw Don on RimfireSS YouTube channel did a build with one using a Lilja 10/22 match barrel. It shot lights out. I shoot 22lr bench rest with a Hole Shot 2500X in unlimited and a CZ457MTR in factory division. We also have a semiautomatic division and I would like to build a 10/22 for competition. Thanks, Joe

Safe queen Rock Island Tac Ultra 2011 9mm. Comes with one mag & all papers etc. must ship this to a FFL.

Asking $600 shipped.

Like the title asks, what’s a affordable, reliable, not Turkey made semi auto shotgun for turning into a SBS if the bill passes with the short act still in tact?

REM 700
6.5 creedmoor
K&p barrel 8.5 twist
Medium Palma contour
26”
Less than 500 rounds
Will include 100 pieces of Lapua brass 4x fired
Chambered by Spartan rifles
Action has been trued
Badger ordnance 20 moa base

PayPal friends
Your ffl must accept from private party

Hey everyone, just wanted to share some of the experience I had while setting my own personal record for farthest hit this weekend.

I had the opportunity to go out to a range while visiting some family and I brought the MRAD with 300 PRC barrel. I had the personal goal of 2500 yards as that’s the max for the range, but only was able to make it happen at 2158 yards.

I wanted to ask a question or two to those of yall with more experience regarding wind and ELR shooting all together.

-Wind calls from AB Quantum were accurate out to a mile (round was still supersonic) then at the 2k mark I found myself holding a ridiculous and inconsistent amount to get impacts. Input? I’m pretty confident I was putting the right data in, and wind was generally consistent from me to the target with what I was seeing at my own location.

-Elevation data, again between AB Quantum and a kestrel which is still just AB vs AB. What are you guys doing to true up at distance? I’m familiar with MV truing, CDF, and DSF, but what are y’all doing for those longer distances to increase first round hit probability?

Pictures for your time! Picture with red square is the shooting platform as viewed from the target.

Have an NBK and looking to gather more parts for it. The trigger pin to cocking piece distance is measuring .154”. Looking at a top sear compatibility table, it looks like I am going to need a low sear. But also looks like I’m at the upper limit of sear engagement before having issues. So wondering what sear others are using and if you had to shim the hanger to get a bit less engagement. Reading it sounds like impact used to send a different trigger hanger and switched to the Current one due to trigger tech trigger sears. Any one know if the older impact trigger hanger is available custom order? Looks like .010-.015” less engagement would center me more in the sear comparability window.