Looking to buy vortex razor gen II 4.5-27 mil or moa is ok. Please reach out to me if you have one you're willing to part with. Please make me an offer. Thanks

MILs in Blue was used for maybe a week and looks brand new - $75 shipped


Zelle or cash app only

I tried out the catch all, but it’s too big for my needs. Has dual belt clips and side release closure. This config would be just over $100 with taxes/shipping.

$70 delivered

Looking to trade for a chassis after fiddle dicking a few I think that’s direction I want to go. I’ll probably regret it but either way we have a prs-tcs with sikes clutch rail. Back in black color way, double dead fill, couple use marks but overall really nice. Comes with the clutch and butt pad weight pictured. R700 SA and clones, right handed. Also have one of the new gray ops straight barricade stops not yet installed. TRADED

Stocks im looking for also in RH R700 :
-MDT ACC Elite
-AX-T
-cadex Strike pro or XS or possible competion
- possibly a vision pro
-possibly mpa vanquish
-possibly MPA BA comp with $ or extras

Looking for a prs-ish type rifle for some informal shooting with friends and dreams of a competition one day. Possible choices include Sig Cross HTX, Seekins HIT, Tikka Ace, Aero Solus and possibly Seekins PH3

I have a Tikka Superlite that hammers and I have shot the TAC A1 which was also a hammer. Tikka is a known commodity to me and I have confidence in them.

Sig HTX is on sale at Europtic, but I’ve never gotten to shoot one.

Seekins have a great reputation and a cool switch barrel feature.

Aero Solus seems to be a good value and I’m comfortable swapping barrels and basic assembly.

I am purchasing 6.5CM in whichever gun I choose. Looking for accuracy to be sub MOA for a ten shot group. Let me know what you’ve seen between all these guns to throw some info into my decision beyond what I have.

Thanks

In another thread (one that I'd prefer not to take away from, a side conversation had broken out between @lash & myself having differing opinions.

I'm trying to remain neutral on the topic but to voice my opinions on the matter- I find the Pledge of Allegiance to have socialist roots and find it to be more of a nonsensical practice that's spanned decades without being given proper scrutiny and anytime it's being questioned it was met with undue scrutiny and 'unpatriotic' accusations.

I doubled down and said that I didn't feel that the playing of our National Anthem had a place in any sporting events (specifically calling out Hockey and Soccer as not even having US roots). I further went on to say that I found both of these to be acts of 'false patriotism' (just what I called it) and that it holds no merit outside of the belief that how we "do it here" and ignores the actual background of either the Pledge of Allegiance being stated in schools or the National Anthem being played before sports (whether it be midget football or the NFL).

What's the Hide's thoughts on this?

If one is "pro" national anthem- another point I raised and would like to hear explained in this thread is why do we expect folks to not only play along with a public display of nationalism during the anthem, but why is it that we incorporate the physical removal of hats/headgear as part of that display? And also- do we "really" believe that to be equally important to demonstrating the proper 'reverence' to the National Anthem at least?

We don't expect women to remove formal hats, we've made allowances for practicing jews to keep their kippah on, we don't expect Americans that are Muslims to remove their hijab's or Sikhs to remove their turbans but it'd be argued that someone wearing a "God Bless the USA" baseball cap to have created a publicly unforgivable mistake to wear that hat during the playing of the National Anthem (even during a grade school/midget football game) and that's the only American we tend to take issue with (for reasons I guess?). What's different with the "God Bless the USA" hat wearer and what does the other exemptions have to do with being allowed on durning public displays of patriotism at events that have very little if anything to do with the USA?

Or... is it as George Carlin once argued (and I agree with)- is it simply some nonsense we just ultimately made up and have gone along with/argued against for decades/generations?

I can't speak for anyone, especially for @lash but I find these behaviors to be nothing more than nonsense carried over year after year and having nothing merit wise that they're often accredited as holding.

I'd go even further- I think we need to break these "sacred cows" down to what they are- just nonsense that was made up (and recently in our history for that matter) and move past that so we can address the more important things concerning our country/what I'd argue as being 'true' patriotism.

So what says the Hide?

-LD

Just got it, mounted it up & then took off rifle. All accessories included.

$2000 shipped
Zelle for payment

This would be pretty cool, especially using exhibition walnut. Should hold up just fine if not abused.


Colt Monitor R80. All parts have been sourced and ordered, work to begin shortly.

This


Into this

Just ordered this Surefire Can. Got this for my Remington CSR. Anyone have any experience w/ them or know anything? not very much out there on the internet about them.


8 inches 11 ounces sounds nice. I wonder how it suppresses.

Great condition
$315 shipped

Just send it to everyone!!!

Any smiths that can make this adjustable. ? Or make an adjustable one for it ?

(New)HK E1 stock brand new-$150

HK tungsten buffer w/spring-$70

(New)KAC HH buffer w/ spring (21057) -$120

KAC buffer w/spring (20387)-$70

154 KAC 5 rib rail covers-$770 for all

KAC irons front (99051) USMC stamped rear -$170

Just checking in, hello all! First day on the site, retired LEO. Looking to up my game and put some new tools in the tool box!

1. Armageddon Game Changer - 6# - $sold shipped.

2. Wiebad Plate Bag - ~4# - $SOLD shipped.

3. Eberlestock Butterfly Shooting Pillow - 1.4# - $sold shipped

Trying to find a needle in a haystack, either the 18" BSF or the 20 Proof drop in .204 ruger barrel for an ar15. If it is used, I need to know the round count.

Thanks!

OD green, R700 SA inlet, has additional bag rider and thumb rest, folding stock. Slight wear on arca rail as pictured, excellent condition. Asking $900 shipped and insured. Venmo, Zelle, or PayPal.

I’ve got 540 rounds for sale, would prefer to sell in minimum quantity of 100rds.

Sold

Venmo preferred

I'm looking at putting together a 300 norma for ELR purposes specifically to launch 250 A-tips . I'm a cnc machinist and programmer so I think I'm going to design my own chassis . As for the action I'm really drawn to the Surgeon XL . I was hoping some one on here might be able help me out and take some measurements of one so I could make a fairly accurate CAD model to design a chassis around . very rough cad model picture attached

just thought I would start this thread to document the progress .

I see a lot of Carbon six barrels being bought and sold on here. I am wanting to re barrel a Bolt gun with one in 7MM-08, 20" for a can for use in a blind and truck. Are they any good? I expect .5 MOA or better

Great tripod but moved to a thicker one for use with tripod rear and I don’t want to keep carrying 2 tripods around with me.

$200 shipped
Accept Venmo / Zelle

Terminus Apollo (DLC'd) 3 lug short action with 18” Proof Research carbon fiber sendero lite barrel in 6.5 Creed, will come with 2 bolt knobs (hourglass & tactical) and ThunderBeast Arms CB brake. Barrel work was done by Southern Precision Rifles (not a prefit), 250 rounds fired total on the setup. SOLD

Price include shipping to US50.

#1: 5 boxes [100rds] of Hornady Superformance Match 75gr 5.56 SOLD.

#2: 15 boxes [300rds] of ACC OTM 77gr 5.56 SOLD.

#3: 15 boxes [300rds] of ACC OTM 77gr 5.56 SOLD.

Is there a mathematical formula to copy and paste into Excel to make your own ballistic table form your own data?

I'm wondering because none of the ballistic tables seem to match up with my DOPE. And when I attempt to manipulate the data, some of it will match up, and some will not. Any way to plug known data into Excel and "true" it on your own?

I only have access to 600yds and would like to use my data up to that to predict where it will be at extended ranges I don't have access to.

1 brand new grip module
Parting out a winter project

- X-Full grip module stippled by Frank Castle Customs grip module has Magwell and weight. $110 shipped
Thanks for looking
Cross listed