I'm looking for a geissele mk18 arca rail and a stripped upper. Even better if you have a matching stripped lower.

Thanks

Selling my trg bipod to switch over to an atlas with spigot. Bipod is in excellent condition and snaps it like it should. Asking SOLD obo shipped.
PP FF, venmo

RRS TA-3 leveling base with Arca clamp
I do not have any hardware other than what is pictured. I can try to source the screws or you can get them from RRS.
A little wear and tear
$175 shipped

Griffin Armament
3-lug interface mounting system 9mm, used for approx 2-300 rounds. Compatible with Silencerco
$85 shipped

I got a impact 28” proof 8 twist barrel, 6xc Tub reamer Barrel that has between 900 and 1100 rounds on it. It still shoots awsome with 108 eldm and 39.2 Rl16.
207 pieces of brass that has has been fired 3-4 times and is in good condition. Will ship in the boxes in the picture.
The dies are what they are and still function great.
$450 for the whole deal.

Work has begun on the Elysium AK-47 as used by Matt Damon. Parts are arriving and I am beginning fabrication after a successful proof of concept for the digital round counter.

What I'm building.



Successful proof of concept for the digital round counter. A lot of fabrication before I decide on a final design, especially the placement of the counter. Possible placement on the side of the receiver or mounted on a 45 degree offset picatinny rail adapter.
Login to view embedded media

Selling the following items. Includes USPS ground/first class shipping with insurance. Payment via Zelle or Venmo only. No trades.

- Reptilia ROF 90 RMR/SRO mount. This is for 30mm Geissele and Reptilia mounts. It’s like new. $75. *SOLD*

- Spuhr A-0023 ACI mount. Used but great shape. $45

- Seekins 5/8-24 self timing brake. New take off. $50 *SOLD*

- FCD OPF-G RMR mount for Glock MOS with Trijicon sealing plate. Some loctite residue from bedding with 620 that will clean off but otherwise great shape. $45 *SOLD*

- DPP GL-02Ti Titanium RMR plate for Glock dovetails. Like new. $25

- AI AICS/AW OEM spigot with sling stud and bolt. This was removed to install and Badger NV mount some time ago. $100 *SOLD*

- Seekins 700 LA 20MOA base with 6-48 screws. Has some residual residue from bedding but it’s been cleaned up and nothing that effect function even if you’re not going to bed it. Couple of dings in the anno but otherwise good shape. I’ll include some extra screws as well. $50 *SOLD*

Trades:

- Cases of Federal American Eagle 357 mag 158gr JSP.
- Cases of Hornady 44 mag 240gr XTP or Leverevolution.
- Trijicon MRO HD.

Ballistic-X is an App developed for the precision shooter to assist users in calculating shot groups for load development. As we stepped into the development process, we called upon over 30 credible and well-known names in the industry to help us Beta test and polish what we created. The function is similar to any Shot Group Calculator such as “On Target” for Windows; this one simply does it straight from your device with a modern User Interface and Experience on both Apple and Android.


Workflow is simple: Designate reference size and Point Of Aim, choose the distance from target and caliber, and mark impacts...DONE. Our Overlay can be dragged anywhere onto the image and then exported for sharing or storing. The Options menu allows the user to select what is shown in overlay and also allows the user to choose readout in MOA/MRAD. The user can add a Comment/Label with as much info as needed. We also have an ATZ or Adjustment To Zero feature that allows user to Zero rifle or adjust to Point of Aim dynamically at any distance.


As a company, we are set up to support this App and its further development for years to come. After launching just days ago, we have already received feedback from 80+ users and have already begun improvements which we are presently testing. The positive response has been overwhelming as we hit #1 in the Apple Store for in the Sports Apps and #12 in Paid Apps. On the Android side, we managed #2 for New Apps. At this time we have over a dozen positive reviews on both sides!


You can find out more about the Ballistic-X Community on our Website, Instagram, or Facebook!


http://www.ballistic-x.com/

http://www.instagram.com/ballisticxapp

http://www.facebook.com/ballisticxapp/

WTB Badger Ord M134 bolt action rifle. I have a few customs if interested in trades as well.
PM inquiries.

WTS Geissele Super Duty DDC stripped upper and Geissele SMR MK16 DDC 15" handguard. $450.

Manners Compact Stock in 700 SA. Mini chassis, Salmon River Arca/Pic, tab bedded (for Rem 700), cheek cushion, bloodshot color. Mag with color match base included. $old shipped, PPFF or Zelle preferred.

85 pieces of 2x fired 6mm PRC Hornady brass. Easily brought up to .25 cal or 6.5mm with a mandrel.

$50 shipped

Two Vets Quick Deploy tripod. Used in great condition. Has flat top with 3/8 stud and arca rail..

Tape and other stuff will be removed prior to shipping.

SOLD shipped
Paypal/Venmo/Zelle

Are there any variation in the Remington 700 action? I have two Remington 700 SA barreled actions; they may have different triggers. One would drop into a 2013 AICS chassis, and the other would not, it seemed it got hanged up by the trigger area (it's hard to see). They both would drop right into the same HS Precision police stock. I don't want to start grinding the AICS chassis unless I am 100% sure. Any idea?

I’m currently reading (ok, listening to the audiobook of ) “sniper on the eastern Front” by Albrecht Wacker, highly recommend by the way. Does anyone know of any good books about a Russian sniper in Ww2 that are similar? I love how detailed Wacker is with his storytelling

Apr 3, 2025 - Recap of the URSA NorCal March ‘25 event (by RD, Lynn Dragoman; build info and notes from Oscar)

Shooters, we had a break in the weather so we held 3 matches on Saturday March 29th. We want as many shooters as possible at the 3K Match in April so this was a golden opportunity and we took it

Conditions were cold to the point I had on several jackets and wrapped myself in a moving blanket. Amanda had a Mr Buddy heater running and my fingers were numb. Officer S stopped by to see how we have been as the rain and snow has canceled our last few matches.

Match 1 started off with Doug taking the win over Amanda.

Match 2 had me taking the win in a shoot-off against Amanda.

Match 3 had Amanda taking the win against Doug in another shoot-off but at 2600 yards!!!

Amanda and Doug are both shooting chassis made out of micarta and both guns are shooting well. I will post a picture of I can

Calshipbuilder was shooting a 308 Winchester and actually did well at 2147 yards. He had yet to qualify for the April 3K match so I sat out of match 3 and let him shoot my 375 CheyTac in my place. His first 7 shots behind the gun produced 5 hits at 2147 yards and a spot in the upcoming 3K Match. He ran out of ammo and finished the match with his 308 Winchester.

A big congratulations to Doug and Amanda on 2 wins and a great job by Calshipbuilder for qualifying for the 3K.

Jim R had 4 hits several times and I am confident we can get in another match if the weather allows and get him qualified as well.

Notice how bundled up the shooters are in the pictures (see Gallery).

Match 1 Winner (and Runner-Up in Match 3), Doug (RickyRacer87), was shooting 299 gr. (David Tubb) DTAC’s (with nose ring) out of his Billy Goat Machine-built 33XC with Defiance Machine Deviant Tactical action w/ 30 MOA integrated rail, 32” Schneider barrel, Accuracy Solutions’ “Baby Orca” chassis w/ BipodeXt bipod extender, and Nightforce 7-35x56 ATACR scope on ERATAC 0-70 MOA base and rings.

Match 2 Winner, Lynn, was shooting 390 gr Hornady A-tips out of his Billy Goat Machine-built.375 CT with Stiller 1.600 TAC DRIVER action, Lothar-Walther 36” barrel, McMillan HBR stock w/ tracking rails and barrel block, March 5-42x56 High Master wide-angle scope and Burris rings w/ 40 MOA inserts on a Mirage ULR 70 MOA rail.

Match 3 Winner (and Runner-Up in both Match 1 and 2), Amanda, was shooting 300 gr. Hornady A-Tips out of her Savage 110 action, Ketchum-build .338 LM Improved (40 degree) with 33” Bartlein barrel, Accuracy Solutions’ “Baby Orca” chassis w/ BipodeXt bipod extender, and Nightforce 7-35x56 ATACR scope on ERATAC 0-70 MOA base and rings on the 30 MOA rail.

Calshibuilder was shooting Lynn’s .375 CT for his 3K qual (see specs above).

Looking for a well specced mk12 mod 1 upper, it needs the KAC rail and a good barrel, like a Douglas or centurion.

I have an excellent condition CRK PJ Small Inkosi with S35VN Drop Point blade. Just received this back from the mothership where it received a spa treatment (sharpening/re-blast) as well as a re-issued birthday card.

Excellent CRK smooth action with minimal signs of wear. The blue thumb studs are slightly worn off and there is a slight scuff on the blade I captured in the pic. Blade is obviously factory sharp now and has not been used to cut or carried since receiving it back from CRK.

Comes as pictured with re-issued card/box and sticker.

Asking $285 shipped

PayPal FF, Venmo or Zelle for payment.

Selling a like new Larue mbt2s with the curved shoe. Only installed and dry fired with. Asking $75 shipped. Venmo only.

I am on the hunt for a Bartlein, Kreiger, Hart, PAC-Nor or any other premium maker 7mm, Stainless, 1-8tw, 24” Sendero contour barrel.

I have for trade a Carbon Six 30 cal, 1-9 twist Magnum Sendero blank.

I am looking to trade straight across barrel for barrel.

I will get pics up tomorrow of the C6.

Let me know what you have!

Thanks!

I'd like to know what muzzle velocities are actually being achieved by "Hide" members for their pet handloads that are tipped with Hornady 103-grain ELD-X bullets and fired from 6mm ARC gas guns having either an 18" or 20" barrel length. I'd also to know what the preferred choice of powder is for those handloads.

Thanks in advance for your input in response to my inquiry.

Hello Hide,
I am selling a ADM AD-170-S picatinny mount that came originally on a B&T Cal Gen 2. The mount is in very good condition with some minor signs of use on the inside area. Will come with the original screws from the Cal bipod.

$65 shipped via Paypal FtF or Zelle takes it.

PM me with any questions.

Vivacious

***SOLD *** Never used. Love these triggers, just don’t need this one. $230 shipped

Just like the title says. I have a like new Arken 1-8x28 34MM Scope with Arken Mount. I am getting rid of all my FFP scopes and going SFP. My loss is your gain. $400 buys it

In “like new” condition. Little to no wear on or inside the action or the bolt. No dings or scratches on action, barrel, or stock. Love this rifle. Have shot a couple of PRS matches with it and it has never let me down. I do not necessarily need to sell…. but I am thinking about using this to fund another project.

Terminus Zeus QC

308 Bolt Face

Bartlein 26” MTU in 6GT (+/- 400 rounds on barrel)

PROOF research 20” carbon sendero in .308 (+/- 150 rounds on barrel)

Manners TCS

• includes all arca-rail brass weights, additional butt pad weight, and additional LOP spacers
• Sikes clutch rail installed by altus. Clutch knob included
• Badger EFR installed/ bedded by Altus

Triggertech Diamond Trigger

Includes (3) AICS pattern magazines

• (1) 10rd MDT Mag
• (1) 12rd MDT Mag
• (1) 10rd Accurate Mag w/ +2 baseplate

Area 419 Hellfire 3 port MB

Rifle, Accessories, and additional PROOF barrel: $5,250

Additional items for sale... Badger Ordnance 1.275" 34mm rings with coaxial range finder bridge/ mount: $325