I have a Tikka T3x Lite LA inbound and I'm wondering about my stock options. On the one hand, I could replace the recoil pad with a Limbsaver and add a cheek riser of some sort, or I could ditch the factory stock altogether for a chassis. In the chassis market, I'm primarily interested in the KRG Bravo/Echo or the MDT Field or similar in the sub $500 range. My usage for this rifle will be for hunting deer and hogs at 400 yds or less, with the vast majority of shots falling at 300 and under.

Amongst the chassis, I'm leaning toward the KRG Echo.

What sayeth the Hide?

I have a RRS AI AX/AXMC Auxiliary Body Plate # BAX15 for sale.

Will not fit chassis for Rem 700. This is only for Factory AX or AXMC rifles.

$75 shipped

Zelle or Money Order

AI sage green rail
AI sage green grip
RRS Bax15
TB SR 338 brake M18x1.5
Surgeon action wrench
older Harris bipod
Saw tooth rail is blemished
$300 plus S&H

20-24” ideally 1-10 twist.

We all know .308s last forever, just looking for something to plink with.

I can provide a shipping label to make your life easier.

Model 677-911-972-90-68

Body has a couple small marks from the safe . Glass in great shape, one small mark on front glass.

Included: Box, Manual, Cleaning kit, Caps, Throw Lever, Sun Shade

$2300 shipped

Larue LT808 rings add $150 ...

No trades, no parting out.

Hey all,

I'm somewhat new to reloading but been very successful and having great results thus far. For the most part, I'm good as far as the whole process goes. I just have a few questions and I think I know the answers but would like to get a 2nd opinion from more experienced loaders.

Firstly, below are some brass cases I have. Which of these have crimped primers? I've searched online and looked at pictures. I think I know which are crimped but again, prefer 2nd opinion.

We're going to call these brass pieces A - H from left to right so there's no confusion.

First pic is A B C D E F G H.
Second pic is A B C D E F & half of G
Third pic is C D E F G H



Lastly, I have ammo loaded from my previous barrel. It had a long throat as it was nearing it's end of life. Therefore, ammo is loaded too long for new barrel and the charge is a bit much. I will pull loaded rounds apart and load them to new barrel recipe.

Because they've had a bullet seated in the case for months, should I resize case/neck or will I be good to just seat bullet at new depth? Obviously this would be done after dumping powder and re-charging with appropriate charge weight.

Thanks a bunch...

**edit to add**

Should have thrown these in there too.with the crimped primers question. This is fgmm 7.62



And this...





I should have also mentioned this is all for bolt guns. I do not have any AR style rifles. And whatever brass I end up reloading from these posted above, will be for bolt gun.

Hey guys got lapua brass certs for sale. 1 cert is for 200 pieces and the other is for 100 pieces. Any brass they have. Want to sell together. As prices vary based on caliber it’s a little hard to gauge but I feel it’s priced appropriately.

$400 for both of them.

Gen2 Mildot reticle; excellent condition. Comes with the caps and throw lever. It's in a set of QD Larue rings (1.375" base to center). Excellent condition.

$2600 shipped (+$100 bucks for the Larue LT808 rings).

pls disregard std stereotypes for cyclist or bicyclist etc..

OK, so last year I started combining roadbiking and shooting into one event. This has always been a by myself 10mile 1 way run over the mountain across town to the bougie indoor range to shoot groups and then ride back again but I'm looking to try other runs/ranges. I try to combine my time and groups for total scoring. I have run the Ruger 9mmPCC with lightweight handloaded shock case rounds, a couple of custom CZ pistols and the Ruger Black Grand Mamba 16" 22 pistol. More on that ridiculousness here:
Login to view embedded media So the Ruger PCC kind of cheats as a rifle IMO. I've put rounds on steel at 100+ with it and it does fine for the indoor range that is 25yds but I want a setup that I could take to other outdoor ranges 100yd+ ranges. So I'm looking at rifles to fit the niche. I was an early adopter of 6ARC and have kkkks of starline cases for those so I am leaning to that caliber. I would also kind of like a bolt action. I *did* look at the rifles that the olympic competitors use in the skiing event (seeing as how I'm just replacing the skis with a roadbike or gravel bike). From memory they run custom 22s. I want something I can reload for as a caliber. Also as most of these routes (currently) are along public roads, I don't want to be flagging around a rifle barrel on my back, so something that folds or breaks down is a huge plus. I'm also looking to possibly start deer/coyote hunting with a setup like this as well.

So I'm looking at

• howa mini action : https://www.howausa.com/rifles/mini-excl-lite/ <-- seems like a really great option
• Wingman Elude chassis and howa barreled mini action
• build a short pencil lightweight upper for my 6ARC target rifle (this seems redundant as the biggest advantage would be barrel length ((vs my current 20" 6ARC)) - I looked at a carbon barrel and about choked at the $$$ so that's out. This could be built quickly and cheaply in general.
• just find an old .223/.243 and slap it in a folding stock, possibly re-barrel it or if its a .243 can I just have the chamber reamed to a 6ARC?
• build or buy a 16" bolt action pistol in 6ARC

Ok, so that's what's been on my mind lately. I didn't spend much $ or time on guns last year due to vehicle stuff but this year hoping to get more range time.

Bergera B14 heavy barrel trainer 20 inch long and threaded has the upgrade kit with it swept bolt handle and knob and mag extensions it has two mags that come with it around a brick of ammo shot thru it I’m just thining my heard

Barreled action $1175 shipped conus know your gun laws and this will ship from me to your ffl thanks for looking

Great shape, Mil-C
$2,800 shipped

You pricks are boring me to pieces lately.

Someone go rent a Lambo and dangle a sammich in front of some starving coloreds and post us pictures.

Bench press buckets of concrete hung on the limbs of your bow.

We need a community gathering at the whipping post.

You old hats are losing your touch. (The ones the little fella hasn’t ban hammered yet to pave the way for all these AWESOME new dolts, window lickers, askholes, novelists, and scammers.)

Full disclosure:
22” Bartlein Carbon Fiber #13 barrel. Chambered by Blue Mountain Precision with a .120fb. 279 rounds on the barrel. Threaded muzzle 5/8-24 and will fit a Defiance anti-X/Ruckus SA etc. This barrel strings as it heats up. I’ve only tried to get it to shoot with H1000 and Berger 156’s.

145 pieces of 2x fired ADG brass. 21 of the pieces are loaded and only 1x fired.

Redding comp seater with the VLD seating stem and the regular stem they come with.

Redding F/L standard sizing die.

Buy it all for $600 shipped.

Please send me a PM to communicate. I do not use the comments section to deal or answer questions.

Price for 100 pieces- $80

I have two 100 piece packs of once-fired Hornady 6mm GT brass. It has been deprimed, annealed, shoulder bumped .002, and tumbled. I did not resize or trim necks, leaving that up to the buyer to decide what they want. I will have more up for sale soon if you want more.

Shipping to lower 48 included in the price.

I hate having to do this but I know there will be whiners. To address any complaints and math challenged trolls who think this is too high for once-fired brass, let me pro/con this for you. New Hornady 6GT brass is .84 cents per piece, PLUS whatever the shipping and tax is. For example, a new 100-piece order from a shop known for 6GT in Missouri is $84 + $25.92 in shipping charges to Georgia for a total of $109.92, so in this case you would pay just shy of $1.10 per piece of brass, and this is without tax.

No trades, payment via PayPal, Venmo, or Zelle. Shipping will occur once payment is secured, no exceptions. You are welcome to use Goods and Services options, as long as you are covering the fees.

ALPHA 22GT brass (500) and Forster dies.

$550 shipped brass

$200 shipped dies

For sale is a very nice Athlon Midas TAC HD 6-24x50 APRS3 Mil. Includes Vortex Pro Series 0.90" rings, box, and flip caps.

$350 shipped, Paypal F&F

TLH tactical built upper, 16" stainless heavy contour barrel 1-24 twist, tank style brake, Aero XL upper reciever on a spikes tactical lower with triggertech duty 3.5# single stage trigger, Magpul SL stock and hogue grip. Only shot 20 rounds to zero at 150 yards and it shot great with Hornady custom 250gr FTX. With a 150 yard zero it shot about 2.5" low at 200 yards. Feeds and extracts perfectly. Only selling because I bought this for a temporary deer gun until I could build my own from the ground up.

$675 shipped to your ffl.

AccuTac HD50 in excellent shape. This has been well cared for and only been on a couple of ELR range trips.
This is an incredibly overbuilt bipod that would work great for heavier guns that I'm not currently using much.

I'll take $325 for the HD50 shipped and insured tyd




▪︎▪︎▪︎SOLD▪︎▪︎▪︎
AccuTac FC4 G2 Acra Spec QD
Never used only opened, no box.

I'll take $350. Shipped & Insured!
For the FC4 G2

1. .300 win mag
2. .338 lapua mag
3. .50 BMG

Brand new and unused black Scope Chap for Burris XTR II 5-25x50 with no sun shield.

$30 shipped. PayPal FF with no comments.

Looking for a barrel for AI at-x chambered in 6x47 let me know what you have. Thanks

Larue Tactical LT100 qd mount

This unit came factory on my ir hunter and was replaced with a bobro mount to scoot the optic back. Very little use. It was my first experience with qd mounts and I was very impressed with how it returned to zero when taken on and off or moved to different rifles (different zero profiles on the thermal allowed caliber switching with the throw of two levers and the pressing of a few buttons)

Per Larue website fits acog/vcog models

$125 shipped

For sale: Ultra light 300 PRC - only been shot 6 times and stored in safe. Excellent condition: $2600 OBO
- Defiance Anti action
- Proof Research barrel
- Trigger Tech single stage special
- Mesa Precision carbon stock
- Seekins precision muzzle break
- Hawkins bottom metal

For sale is a brand new unopened Tangent theta 5-25x56 MOA-ER reticle scope.
$4250 shipped obo

Trades
Zco scopes in mil preferably 8-40 or a 4-20
.22lr ammo for distance shooting
EOTECH OGL or WILCOX RAIDX green lasers
RRS SOAR Tripod with anvil 30 head
Terminus QC carbon (proof or bartlein) 300prc, 308win barrels
Carbon blanks 6mm, 6.5mm 30cal.
338cal blank for a 33xc

I’ve started to see rifle stocks inlet with a mlok rail. Does anyone have one? What are your thoughts? Do you like it? Has there been anything you didn’t like? Is this more fad than anything?