For all intents this barrel is almost new. It's from a WOA upper I purchased years ago, and had one range trip. At some point I got a bore scope and found two spots like this while I was checking all my rifles and haven't shot it since. Would you give this a chance and see how it shoots, or throw it in the scrap bin?

Brand New Scope. Vortex Razor HD Gen III Rifle Scope, 6-36x56mm, 34 mm Tube, First Focal Plane, EBR-7D MOA Reticle, Stealth Shadow, RZR-63601. Only been out of the box to take pictures. Has everything included - sun shade, throw lever, etc..

Scraped a rifle build and no longer need this scope. My loss is your gain.
$2400 shipped.

Rings that are taking up space. All are warne 30mm. Low & med height.

$75 shipped for all.

Ok, sparked by this post by @Old Man with Gun:

I began a quest to find a carbon fiber drag washer for my CAL v2 bipod. Drag, as for fishing reels, not for drag shows.

Anyway, I found one, which amazingly needed no cutting, sanding, fitting, cursing, or anything! Heads up: I shoot from a bench, I want to lock the cant ability off (or make it very, very stiff). The CAL, for me, was not cutting it even after messing with the locknut's gross tension adjustment, and I was ready to sell it.

My mod doesn't give me 1000% lockup like my Elite Iron or LRA bipods, but close enough for government work. I wiped off the existing grease that was in the area where the original washer resided before slapping the new CF one in there. I didn't use acetone to remove ALL of the grease, which maybe wouldn't be the worst idea if you want max max max lockup.

I did alert @Kasey (owner of Atlas/B&T Industries) to my research and he's looking into washers like these. Btw, @Terry Cross, the creator of the Pod-Loc cant tightening device that's on the Atlas (and other) bipods told me that his invention works the way it does is by design, a design which was driven by his end users. Out of shape lusers like me were not his focus lol (nor should they have been).

Anyway, I use bipods at the range sometimes because they are light, and I want to set it and forget it. Can't guarantee anything if you like to have a looser cant. Kasey said the previous CF washers his team tried were grabby; if they added lube they didn't lock off enough. Maybe I got lucky…mine is not grabby either.

THE SECRET WASHER​

----> Ask for model number: 8** (yeah, with two asterisks) <-----
Carbontex Drag Washer - 19.54 x 8.06 x 0.76mm
https://www.smoothdrag.com/wp/
Fits Atlas Cal pretty much perfectly. I see no need to trim.

I texted (760) 949-0271 and they texted back. Or you can email, whatever. $2.85 + $0.68 for first class shipping. Ask 'em how to pay.

I got one for free. It wasn't a comp for review thing. They just offered as I suppose they usually get larger orders.

Don't ask for a free one you idiots. It's tree fiddy!!! Do you live in your mom's basement???

1. Unscrew handle
2. Use socket or wrench to remove locking nut. Various other parts will slide off.
3. Slide "mount" off of spindle. Kinda tricky.
4. Remove white plastic washer, decide if you want to remove all grease or just wipe excess off
5. Put your new CF washer on
6. Reassemble and fine-tune the gross tightness by tightening/loosening locknut
7. Spin on handle and go shoot

Carry on.

I have the hardest time getting comfortably behind my rifles at my range's shooting benches/tables. The table surface always feel too high in comparison to the seat. I am not super short (5'10") but maybe I have a short torso?...lol. Has anyone else had this issue? I am about ready to buy a booster seat and look like an idiot...lol.

I have 550 plus one open box of 30.
230gr Sierra Matchking 30cal

I have a GEN 4 Annealeez with the metal wheels and a metal tray. I’m looking to get $260 shipped for it. I had a chance to get a brand new amp no no need for this guy anymore.

New these are $310 plus 15 for the tray. Works great will also include an additional benzomatic torch head.

Selling (2) Armageddon Gear Schmedium gamechanger bags. 1 is heavy fill, the other is standard. No tears, sharpie mark on the bottom side for identification at a match or range.

Would prefer to sell together for shipping purposes.

$160 shipped for both. PayPal PP preferred.

Looking for info on this MPA rifle case. Anyone own/used/seen one?

https://masterpiecearms.com/shop/mpa-custom-rifle-case/

I'm curious if the bottom sections of foam all glued together? I’d like to be able to separate the cut foam section from the bottom solid foam section and flip the cut foam over so that the scope is located on the handle side instead of the hinge side.

KRG Bravo Remington 700. KRG arca rail, KRG Spigot mount, KRG butt hook cover, KRG extended mag catch (installed), KRG standard mag catch (pictured).

I purchased everything new, and all of it is like new.

$525 shipped and insured PayPal FF.

Pictures in comments.

Took this in trade and don’t need it

Optic is clear and works as it should

$1900 shipped

Specter DR 5.56

Looking for a carbon fiber bighorn tL3 prefit in 6.5 cm

6.5cm needs to be 24 inch minimum

Let me know. Thanks!

2 titanium blue control bridges and 1 heckler grip for mdt elite chassis.
Asking $200 shipped pp ff, zelle, venmo.

I pulled this from my kid's hunting rifle to switch her to an adjustable Mil scope. It's less than one year old and purchased from EuroOptic. It was only in "the field" two days. The photos didn't really capture the slightest of ring marks but can be seen with some effort. The glass is as-new.

$600 plus actual shipping and insurance if you want it. No trades.

Thanks for looking.

Selling a Kahles K525i 5-25x56mm DLR CCW SKMR4 LSW in a Spur mount (SP-4026)with SendiT level(neds a new battery).
Sold as a package. Price includes FEDEX shipping to USA.
Asking $2500.
Message me with questions.

MPA Built 6.5 PRC with 40 rounds down the tube. As promised by mpa, it shoots a raged hole less than .5" at 100 yards with Hornady Match 147gn ELD. I purchased this rifle new a couple of years ago and it's just been sitting im my safe as I've been too consumed with hunting, work and rimfire. It's in like new condition as it’s only been to the range twice and has a total round count of forty. The chassis has some light scuffs and a couple of scratches around the magwell because I used it with my RimX for an NRL 22 match but decided to stick with my XLR.

Masterpice Arms Matrix Chassis (OD Green) includes all accessories - grips, thumb rests, and trigger finger supports
Curtis Customs Axiom SA (20 MOA Rail)
TrigerTech Special (Flat Shoe)
MPA Match Chambered 6.5 PRC 26" M24 Contour Barrel 1:8 Twist
MPA DN3 Muzzle Brake
7 Round Accurate-Mag
MPA 2 Round Holder

Bipod not included.

$2600 PayPal f&f, Zelle, or Venmo Shipped to your FFL

Selling my unfired Always Armed 7.5" 7.62x39 Upper Receiver with BCG. The A2 birdcage is currently on hand tight.

Looking to get $115 shipped to your door.

Updated 1 Feb 2025

NEW* 366 brand new 6bra alpha ocd. has been trimmed on a giraud- ready to prime and load. .80 per piece

170 loaded 6bra (110 atips, virgin alpha brass, br-4’s, with varget - goes 2775 in a 26” Stuteville bartlein barrel.
I don’t shoot 6bra anymore so selling it at 1.25 a piece

Also have a sac 6bra die with .2415 mandrel. $275


The below brass is 1x fired alpha brass.

.308 LRP Alpha -500x. $ 300

Wife and I watched it last night, both thoroughly enjoyed it. Both of us thought it was well written and casted (wife is a big fan of Neal McDonough so getting her to watch wasn't too hard)

For such a small company, Angel Studios has really been putting out some damn good movies...Sound Of Freedom, The Shift, Bonhoeffer....all been damn good watches.

Looking forward to watching Homestead: The Series, looks to be a good continuation of the movie.

For Sale: STI DVC Omni 9mm. 99% condition. Awesome gun, I just don't shoot pistols enough to justify keeping it. Comes with original case, box, mags. Less than 500 rounds down the barrel. $3,000 shipped CONUS. Willing to trade for higher end trap/sporting shotgun.

The title speaks for itself. Are electronic levels worth it over bubble levels? Why? Considering getting a Sg Pulse of Send it but not sure if it will make a difference.

If you could only have one bipod for PRS and NRL Hunter what would it be? Particularly interested in the CKYE-Pod line.

M40A1 ish Barreled action, built by Eric Reid while he was at GAP. 6 digit serial, Schneider barrel, tombstone safety walker trigger cut for A1 bottom metal. It’s an -Ish because it has a thicker lug and doesn’t have the thumb cut for an A1, but otherwise awesome action and looks really good in an HTG stock. Has a ton mark on the barrel (pictured) but otherwise in good used condition. Round count well under 1k.

$1500 shipped, payment via PayPal F&F, Venmo, Zelle, USPS MO. SOlD

I have a precision AR w/ an adjustable JP gas block. I don't generally clean it. I thoroughly clean the barrel, bolt & action every 250 rounds or so but not the gas block. Should I? If so, what is the proper way.