Hi all - I have a confusing issue that I'd like some guidance on. Getting conflicting answers from the internet and the people I've talked to.

I bought a CMMG Endeavor 300 (never again) in 6mm ARC. The barrel was trash and so was the upper, so I quickly got a new upper and a Proof Research 20" stainless barrel. New barrel shoots lights out. The rifle has an adjustable gas block. Originally the rifle had a rifle length gas system. The new Proof barrel is a rifle +1 gas system. It has a Magpul PRS 3 stock with a rifle length buffer & buffer spring - NOT a carbine length.

It cycles fine with factory ammo, and with LeverEvolution & CFE223 handloads. These produce......acceptable accuracy, but nothing great. I've had much better luck with Varget and 8208XBR for both accuracy and consistent velocities. The results are seriously impressive and I'd like to continue with those loads. However, those loads won't cycle the rifle, even after I load a high enough charge that I see concerning pressure signs. They will eject the spent brass, but won't send the bolt carrier group back far enough to load the next round. The AGB is wide open and is not restricting gas. They will work fine when the barrel is suppressed. And no, I don't really want to "just shoot suppressed all the time, bro."

I tried reducing the number of weights in the buffer, but nothing happened. The guys at Proof said I needed to try a heavier buffer spring before drilling a larger gas port in the barrel - and not a lighter buffer. They said a heavier spring will increase dwell time and thus allow the lower pressure powders to build up more pressure.

A tech at Brownells said "No, that's wrong - a spring won't do it. You need a heavier buffer. But sorry, we don't offer a heavier rifle length one." So I talked to Clint at HeavyBuffers.com and he recommended shortening the buffer tube to a carbine length buffer tube with a spacer, then installing his heavier carbine buffer and spring.

I'm getting tired of sinking time and money into this with no clear answer.

Has anyone experienced a similar issue? Is there a simple solution to this that I'm missing?


UPDATE Sunday, Feb. 19, 2023:

I removed my 5.5 oz rifle length buffer, installed a spacer to shorten it to a carbine length buffer tube system, and had the following results with the adjustable gas block wide open:


-(UNSUPPRESSED) Heavy buffer and spring combination from www.heavybuffers.com (6.4oz buffer) at the recommendation of the guy at Brownells: Ejected, short stroke, failure to lock back or to load the next round.


-(SUPPRESSED) Heavy buffer and spring combination from www.heavybuffers.com (6.4oz buffer) at the recommendation of the guy at Brownells: Ejected, successfully loaded the next round.


-(UNSUPPRESSED) Buffer spring and H1 buffer that came stock with my Daniel Defense DDM4V5. Assuming spring is a standard carbine spring. Ejected, short stroke, failure to lock back or to load the next round.


-(SUPPRESSED) Buffer spring and H1 buffer that came stock with my Daniel Defense DDM4V5. Assuming spring is a standard carbine spring. Ejected, short stroke, failure to lock back or to load the next round.

Surprised this one did not work suppressed.


TL;DR, problem persists and was not overcome.


Next steps to try in the coming week:

1) Replace gas rings on bolt

2) Try a JP silent captured buffer spring with the spring kits of varying strengths, and

3) Try my H1 buffer with a Sprinco yellow spring.

If none of these prove satisfactory, and if no other viable solution presents itself on this forum or in my brain, I'm sending the barrel back to Proof for gas hole enlargement.



UPDATE 2/21/23

-Installed new gas rings on bolt. Ensured gas block was wide open. Test fired. Failure to load next round; failure to lock back on last round.

-Installed JP Enterprises Silent Capture Spring system. Test fired. Failure to load next round; failure to lock back on last round.

-Installed JP Enterprises reduced power spring (white). Test fired. Failure to load next round; failure to lock back on last round.

-Bore scoped barrel; confirmed that gas block is properly in line with gas hole.

At this time, I believe I've exhausted all likely options, and I don't think the Sprinco reduced power spring will yield any wildly better results than the JP reduced power spring.

Therefore, I will pursue opening up the gas hole and report back.

For sale is a Bushnell DMR IIi 3.5-21x50 mil/mil scope with an illuminated G3i reticle. This was mounted but never used and is in like-new condition. Includes sunshade, lenses covers, scope cover, adjustment tool, and packaging.

$750 shipped. I am not interested in trade offers at this time. SOLD

President Trump revoked Biden's security clearance sighting what Biden did to him after the election

Login to view embedded media

New ZCO Block Mount. #400-0377. 0MOA
$300 Shipped
PayPal F&F or Venmo gift

Hi!
I have seen pictures of the sig cross with a fixed stock.
I cannot find any information about it. Anyone of you guys know if it is in production? In the user manual, the stock must be folded to remove the bolt carrier group it seems...
If not, anyone got a good tip on how to make a foldable stock into a non-foldable? Must be permanent, as the regulations demand it to get it registered...

Looks like a great gun, hope it shoots as well as it looks!

Complete Remington 870 MCS kit including 10”, 14”, and 18” barrels, also includes m4 style collapsible stock and pistol grip. Comes with hard case. Very good condition. This is an SBS, not AOW, and requires a $200 tax stamp. Will need to be shipped to an FFL with an SOT. $5k. Pm for details.

SOLD Picked this up and never actually used it. Previous owner stated <300 rounds and I have no reason to doubt him. Used but not abused. $475 shipped. SOLD

-BCM receiver with Magpul ejection port cover
-12.5" ADM(Criterion) barrel with titanium SLR gas block
-11.5" Hodge rail
-Q Cherry Bomb




This has been sitting on my reloading bench for too long and I have never actually used it. Previous owner stated <500 rounds. Used but not abused. $450 shipped.

-WOA receiver
-16" WOA SPR barrel
-12.6" WOA TR Rail




Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-16” Douglas MK12 Mod H Barrel

Looking for 300WSM brass. Going with either ADG or Lapua. I’ve read many of the threads which indicate there can be a “click” issue with ADG and at times with Lapua. I didn’t even know what that was at first as I’ve never experienced that issue in over 40 years of reloading.

Apparently it has to do with very high quality brass having harder bases, especially ADG which can cause issues if the chamber is not cut correctly or worn reamer was used and can be mitigated by using a body or small base die from the beginning. Many have had no issues at all using normal dies.

Have any of you had this issue and would you recommend one over the other? As far as I can tell, you really can’t go wrong with either ADG or Lapua.

$50 each shipped

Have a new pair of Bushnell Forge 15x56 that I've never used. Won them as a prize new.

I just took it out of the box for pictures, comes with everything that came with a brand new pair/box.

$300 shipped.

Are they going to go to jail for 4 years????

Because... there sure seems to be a lot of violent insurrection going on.

Sirhr

$15 per 100 plus shipping. Medium flat rate will be $15 to ship and large is $20

To California. Will be shippied minus the bolt carrier. However upper has bayonet lug/gi contour barrel. Is this going go be an issue?

Tried for about 30 brasses. Comes with all the parts: die body, lock ring, .268” bushing, tapered adapter, collet, decapping pin, cap and shims. Also include an extra .266” bushing, a .2400” mandrel expander and the 7mm collet. No box because I didn’t receive one from SAC. They shipped everything in a tube. I dropped my decapping mandrel (not part of this sale)on the floor and damaged the pin and SAC provided me a 15% off code towards 1 mandrel and I will give it to the buyer as well.

$250 shipped for everything. PP F&F or buyer covers fees. No trade please.

Reason for selling: The die doesn’t work for my ZERO press. Didn’t bump the shoulder at all. SAC gave me a few things to check and so far I am unable to get it to work. I don’t want to try different shell holders, I have to re-adjust everything else if I do that. I am not the only one having this issue. Just search for it. Here’s an example. https://www.snipershide.com/shooting/threads/sac-sizing-die-zero-press.7218153/

To avoid scamming, don’t post in this thread and I will NOT message or call you first. If interested, DM me please.

While attempting to get my gas tube aligned before installing the pin my gas tube has become stuck in my gas block. I am using a Superlative Arms adjustable gas block and the supplied gas tube that came with the barrel from Craddock Precision. I don't want to use plyers and risk damaging the gas tube. I have looked online for a gas tube wrench like this one https://www.brownells.com/tools-cle...ols/wrenches/ar-15m16-308-ar-gas-tube-wrench/ but they are all listed as either sold out or discontinued everywhere I look. Does anyone have another tool they can suggest to remove a stuck gas tube without damaging it?

Barreled action only for sale. A catch and release, I purchased this rifle for the stock and scope for another project. This was custom machined and built to run the Berger 156 EOL.

Build Specs:
- Lane Precision Rifles built
- Lone Peak Razor Titanium- SA
• Action was machined to be used with the Unknown Munitions XL SA or the 3B Bainey box, and accept up to a 3.150" long loaded round.
- Proof carbon fiber-wrapped, select match-grade 26" barrel with 1:8 twist for heavier bullets, Sendero profile, throated for the Berger 156 EOL bullet.
- SRS Ti Pro 5-port self-timing brake.
- Trigger Tech Two-Stage Diamond Pro Curve Trigger.
- Redding Type S Match 2-Die Set w/Micrometer Seating Die
- Norma Brass
(45 pieces of 4x fired brass)
(50 pieces of new brass)
- 140 rounds fired.

$3,150 shipped. This is an excellent deal at this price.

VV at Graf & Sons . $34.00 per lb. sale

https://www.grafs.com/retail/catalog/product/productId/82763



Vihtavuori 24N41 is a single-based treated rifle powder very similar to the 20N29. It has a very large grain size (length 2,3 mm by diameter 1,3 mm) and an extremely slow burning rate ideally suited to the .50 BMG. It can also be used for some large capacity cases, such as the .300 Lapua Magnum, .300 Rem. Ultra Mag, and the .338 Lapua Magnum. Of the two, 24N41 is slightly faster than 20N29, with a renewed relative burning rate of 39 for the 24N41 compared to 36 for the 20N29, when N110 is given the index 100

Good morning, Members!

Below is the updated list as of today 02/07/2025 of optics, mounts, rings, rails, red dot sights, magnifiers, BUIS, grips, stocks, triggers, mono/bipods, suppressor adapters, lights, handguards etc.

I've added around 75 new items to this list. Hopefully you'll see something you're interested in that wasn't on the previous list.

PM me for any pics or info on any items that interest you.

**Members please be aware of scammers. I will only arrange payment though PM on this site and only under my profile Rpatton73. Anyone trying to secure payment using a different profile or through text is a scammer.**

OPTICS

1. US OPTICS SN-8 1-8x27mm Digital Red with 2/10 MIL Zeroing Windage & Elevation Knobs with FFP C2 Reticle w/ Flip Lens Covers $800

2. US OPTICS SN-8 1-8x27mm Digital Red with 2/10 MIL Zeroing Windage & Elevation Knobs with FFP C2 Reticle w/ Bikini Lens Cover $800

3. US OPTICS SN-8 1-8x27mm Digital Red with 2/10 MIL Zeroing Windage & Elevation Knobs with FFP C2 Reticle w/ Bikini Lens Cover $800

4. US OPTICS SN-8 1-8x27mm Digital Red with 2/10 MIL Zeroing Windage & Elevation Knobs with FFP C2 Reticle w/ Lens Covers $800

6. US OPTICS LR-17 EREK 3.2-17x44 30MM Illuminated Reticle Parallax Adjustment w/ Honeycomb Sunshade and Bikini Lens Cover $1200

9. U.S.Optics Rail Mounted Swivel Bubble Level BBL-300, $50

19. Leupold Mark 4 CQ/T 1-3x14mm Circle Dot Reticle 3MOA @ 3x, 9MOA @ 1x w/ Plastic Flip Lens Covers $550

23. ELCAN SpecterDR 1x/4x Illuminated CX5396 Reticle 100-600m .308/7.62 Carbine, 700-1000m 7.62 LMG w/ Trijicon RMO1 Red Dot Sight $1500

36. Bushnell Elite Tactical ERS 3.5-21x50mm, FFP G2 Reticle w/ Bikinin Lens Cover $1100

38. Burris Xtreme Tactical XTR II 1.5-8x28mm, FFP Illuminated Ballistic 5.56 Gen3 Reticle w/ Plastic Burris Flip Lens Covers $500

42. Leupold Mark 4 LR/T 4.5-14x50mm, Mil-Dot Reticle, w/ Barrett BORS System and Barrett Zero-Gap 30mm High Rigid Scope Rings w/ Leupold Aluminum Lens Covers $1300

43. Aimpoint Hunter Red Dot H30L 2MOA in box w/ Flip Lens Covers $400

45. Aimpoint Hunter Red Dot H30L 2MOA w/ Bikini Lens Covers $350

46. Aimpoint Hunter Red Dot H30S 2MOA $350

47. SwitchView Lever 1692SV2R3V1, NXS/VTX Viper/Leupold MK6/MK8-CQBss, NEW IN BOX, $40

48. SwitchView Lever 1692SV2R3V1, NXS/VTX Viper/Leupold MK6/MK8-CQBss, NEW IN BOX, $40

58. Nikon M-223 2.5-10x40mm Laser IRT Precision AR Optic, BDC 600 Reticle, New in box w/ Nikon Lens Covers $300


SUNSHADES

1. Vortex Viper 44MM 4”, $20

2. Vortex Viper 50MM 4”, $20

3. Carl Zeiss 44MM 2.5”, $20

4. Carl Zeiss 56MM 2.5”, $20


RED DOT SIGHTS, HOLOGRAPHIC SIGHTS, MAGNIFIERS and FLASHLIGHTS

3. EOTECH 3x Magnifier w/ Larue QD LT755S Mount $400

8. Viridian X5LRS w/ Tape Switch for AR Platform, $125

18. Steiner OTAL-C IR Offset Tactical Aiming Laser w/ Picatinny Mount, $400

19. Pulsar-940 IR Flashlight, $60

20. Streamlight TLR-2 HL G, rail mount flashlight w/ green laser, $275


SIGHTS

2. MEPROLIGHT Tritium ML-10662, Beretta FS/M 92/9 Series Tru-Dot Night Sight System, NEW IN BOX, $70

5. LWRC Skirmish BUIS Rear Sight, U07-0295A01, $40

6. LWRC/Troy Skirmish BUIS Rear Sight, Tan, $40

7. Daniel Defense A1.5 Fixed Rear Sight (Rock and Lock), $40

8. HK MP5 Rear Sight


GRIPS, STOCKS and MISC

1. Larue Tactical, Indeed Clips, 72 Piece Set, Black, NEW IN BOX, $10

2. Strike Industries, Patriot Tactical Grip, Enhanced Pro Model, BLK, NEW IN BOX, $15

3. ERGO Grip AR15/M16 Tactical Deluxe, Sure Grip, OD Green, NEW IN BOX, $25

4. Accu-Shot BT27 Folding Vertical Grip, $50

5. MAGPUL ACS w/ BattleLine Industries SAPR MAGPUL, $200

6. LIMBSAVER Tactical Pre-Fit Recoil Pad for Magpul Buttstocks, NEW IN BOX, $30

7. LIMBSAVER Tactical Pre-Fit Recoil Pad for Magpul Buttstocks, NEW IN BOX, $30

8. SIG SAUER SIG TAC SB15 AR Pistol Stabilizing Brace, $65

9. SIG SAUER SIF TAC SB15 AR Pistol Stabilizing Brace, $65

10. SIG SAUER SIG TAC SB15 AR Pistol Stabilizing Brace, $65

12. Troy Battle Rail Cover 4.4”, NEW IN BOX, $10

13. Troy Battle Rail Cover 4.4”, NEW IN BOX, $10

14. Troy Battle Rail Cover 4.4”, NEW IN BOX, $10

15. Troy Battle Rail Cover 4.4”, NEW IN BOX, $10

16. Troy Battle Rail Cover 4.4”, NEW IN BOX, $10

17. Hogue AR-15/M16 Overmolded Collapsible Buttstock, $30

18. ERGO Grip AR15/M16 Tactical Deluxe, Sure Grip, OD Green, $20

19. POF AR Pistol Brace, $40

20. POF AR Pistol Brace, $40

21. Shockwave Technologies Blade AR Pistol Stabilizer, $20

22. Shockwave Technologies Blade AR Pistol Stabilizer, $20

24. Nighthawk Custom Overseer Model 6 Collapsable Buttsttock, $275

25. Strike Industries, Patriot Tactical Grip, Enhanced Pro Model, BLK, NEW IN BOX, $15

26. Troy Industries Modular Combat Vertical Grip, SKU# SGRI-TRG-A0BT-00, $30

27. Daniel Defense Picatinny Vertical Foregrip, $25

28. FAB Defense Mossberg Tactical Folding Stock w/ Magpul Adjustable Stock, $65

33. MAGPUL MOE SL Carbine Stock, $40

34. CAA UPG Grip, $15

35. ATI Scorpion Recoil AR Pistol Grip, $20

36. ATI Scorpion Recoil AR Pistol Grip, $20

37. FAB Defense SSR-25 Sniper Adjustable AR15/LR308, Black, $100

38. Impact Weapons Mount-N-Slot Direct Attach SCAR Charging Handle, NEW IN BOX, $25

39. Tactical Link, Gen1, Z-360 AR QD Sling Mount, $45

40. SIG SAUER SIF TAC SB15 AR Pistol Stabilizing Brace, $65

41. SIG SAUER SIF TAC SB15 AR Pistol Stabilizing Brace, $65

42. Thordsen Customs FRS-15 Carbine Stock Kit w/ LimbSaver Pad, $40

43. Kriss USA Kriss Vector M4 Stock Adapter, $40

44. Battleline Industries SAPR Magpul, BAT0401, $140

45. Kriss USA Quik-Release Swivel Body Pin Slingmount, NEW IN BOX, $25

46. Magpul CTR w/ Limbsaver, OD Green, $40

47. Larue Tactical AR10 A-PEG Grip Coarse Texture, OD Green, $10

48. Pachmyr Decelerator Large Field Pad w/ McCutchen Pachmyr PRS Adapter, $75

49. Knights Armament RAS Forend Rail Sling Mount Adapter, NEW IN BOX, $40

50. LIMBSAVER Tactical Pre-Fit Recoil Pad for Magpul Buttstocks, NEW IN BOX, $30

51. Stark SE-3 Vertical Foregrip w/ Tape Switch Slot, NEW IN BOX, $20

54. Magpul MOE Carbine Stock, $35

55. BowJax AR-15 Barrel Dampener, 3 Pack, NEW IN BOX, $10

56. BowJax AR-15 Barrel Dampener, 3 Pack, NEW IN BOX, $10

57. Hera Arms SFU, Side Folding Unit Adapter, NEW IN BOX, $75

59. CDI Precision Detachable Box Magazine Trigger Guard for Tikka T3 SA, NEW IN BOX, $150

60. CDI Precision Detachable Box Magazine Trigger Guard for Kimber 8400 SA, NEW IN BOX, $150

61. BowJax AR-15 Barrel Dampener, 3 Pack, NEW IN BOX, $10

62. BowJax AR-15 Barrel Dampener, 3 Pack, NEW IN BOX, $10


HANDGUARDS

1. Wilson Combat T.R.I.M. 14” Modular Handguard, $100

2. Lancer LCH7 12.5” Carbon Fiber Handguard for AR10 DPMS Upper, $200

3. Precision Reflex Gen III SR25 Carbon Fiber Free Float 12.5” Handguard, $200

4. Heckler & Koch MP5/SP5/HK94 Wide Forearm, $50


TRIGGERS

1. KNS Precision Inc, Trigger Group Pins, SS Non-Rotation, Small .154, NEW IN BOX, $25

2. KNS Precision Inc, Trigger Group Pins, SS Non-Rotation, Small .154, NEW IN BOX, $25

3. KNS Precision Inc, Trigger Group Pins, SS Non-Rotation, Small .154, NEW IN BOX, $25

4. Timney Triggers Scar 17 3.5LB Trigger, NEW!!, $225

5. TAC-CON 3MR 3RD Mode AR Trigger, NEW!!, $165

8. Geissele Automatics Super ACR Trigger, Bushmaster ACR Two-Stage, NEW IN BOX, $140


SUPPRESSOR ADAPTERS

1. Surefire Legacy MB762-211C 7.62/308 Muzzle Brake/Suppressor Adapter, $70

2. Surefire MB338SS03 .338 CAL Muzzle Brake/Suppressor Adapter, NEW IN BOX, $100

3. Surefire FH762K 7.62/.308 Flash Hider, NEW IN BOX, $80

4. JP Enterprises Standard Compensator Muzzle Brake, 5/8-24 Thread, $40

5. Surefire Warcomp 5.56 1/2-28 Flash Hider, $100

6. Precision Armament M41 Severe Duty Muzzle Brake, M41A2-338-416T, $70

7. Battle Comp BABC 5/8-24 Thread Flash Suppressor, $35

9. SilencerCo Trifecta Muzzle Brake 1/2-28 Thread, $20

10. SilencerCo Trifecta Muzzle Brake 1/2-28 Thread, $20

12. SilencerCo Trifecta 3-Prong Flash Hider 1/2-28 Thread, $20

14. SilencerCo Trifecta Muzzle Brake 5/8-24 Thread, $20

15. SilencerCo Trifecta Muzzle Brake 5/8-24 Thread, $20

16. SilencerCo Trifecta Muzzle Brake 5/8-24 Thread, $20

17. SilencerCo Trifecta Muzzle Brake 5/8-24 Thread, $20

18. SilencerCo Trifecta Muzzle Brake 5/8-24 Thread, $20

19. SilencerCo Trifecta 3-Prong Flash Hider 5/8-24 Thread, $20

20. SilencerCo Trifecta 3-Prong Flash Hider 5/8-24 Thread, $20


MONOPODS and BIPODS

4. CTK Precision Accuracy International Monopod, #AIMP1, NEW IN BOX, $100

5. Smith Enterprises Bipod 7” to 9” Picatinny Mount, Steel Claw Feet, $80

6. Accuracy International Versa-Pod 7”-9” Prone Bipod w/ Ski Feet $80

8. Tango Down ACB-4 Bipod, $110

10. CTK Precision Ultimate Aluminum Monopod, #MPOD1, $75

11. CTK Precision Ultimate Aluminum Monopod, #MPOD1, $75


RAILS & RAIL ACCESSORIES

1. M14/M1A CASM 4-Point Optic Rail /Compensator Set, $100

2. Precision Hardcore Gear Tru Level Rem 700SA 0MOA 1-Piece Picatinny Scpe Base w/ Integral Bubble Level, $50

3. Farrell Rem 700SA 20MOA Picatinny Base, REM7S120, $65

4. Farrell Rem 700SA 20MOA Picatinny Base, REM7S120, $65

5. Murphy Precision 0MOA Titanium Stiller, REM 700LA, $125

6. Trijicon AccuPoint Remington 700 2 Piece Standard Steel Base, NEW IN BOX, $50

7. Precision Hardcore Gear, Tru Level Picatinny Rail, Remington 700SA, NEW IN BOX, $70

8. XS Sight Systems Lever Scout Mount ML-6000R-N, Marlin 1895 .45-70, .450, .444, NEW IN BOX, $50

9. Nightforce A199 One-Piece Steel Base, WIN 70 SHORT MAG, 20 MOA, NEW IN BOX, $90

10. Kriss USA Picatinny Siderail Kit , NEW IN BOX, $15

11. Leupold Mark 4 Rem 700 LA/SM LR 1-Piece Base, 65970, NEW IN BOX, $65

12. Knights Armament 11 Rib Rail Panel 1S002, NEW IN BOX, $15

13. Leupold IMS Integrated Mounting System, Mark AR Rail Mount, $50

14. ERGO Slim Line Rail Cover 3PK Coyote Brown, NEW IN BOX, $15

15. Knights Armament 11 Rib Rail Panel 1S002, NEW IN BOX, $20

16. Noveske NSR Keymod Direct Attach RIS Rail System, NEW IN BOX, $15

17. Magpul XTM Enhanced Rail Panels, Black, $10

18. Noveske NSR Keymod Direct Attach RIS Rail System, NEW IN BOX, $15

19. Knights Armament 7 Piece Keymod Flat Panel Kit, Tan, NEW IN BOX, $20

20. EGW HD Tactical Savage Accutrigger SA Picatinny 20MOA Rail, Savage Model 10/11/12/14/16/110/200, NEW IN BOX, $30

21. Ken Farrell Rem 700 LA 1-Piece Std Base, NEW IN BOX, $75

22. AimShot MT61172 Quick Release Rail Mount, NEW IN BOX, $20

24. Knights Armament 11 Rib Rail Panel 1S002, NEW IN BOX, $15


MOUNTS

5. SPUHR SP-3001 1.181” Picatinny Mount 0 MOA 30MM, $265

6. SPUHR ST-4702 1.73” Sako TRG Mount 24 MOA 34MM, $265

7. SPUHR ST-4702 1.73” Sako TRG Mount 24 MOA 34MM, $265

8. Larue Tactical SPR/M4 1.93” QD Mount QD LT135 30MM, $165

11. Larue Tactical Aimpoint Micro T1/T2/Comp M5/M5S QD Mount Mount LT660 1/3 Co-Witness, $60

12. Larue Tactical Aimpoint Micro T1/T2/Comp M5/M5S QD Mount Mount LT751, $60

16. Larue Tactical Aimpoint Micro T1/T2/Comp M5/M5S QD Mount Mount LT751, $60

17. Aadland Engineering AADMOUNT, 20MOA - 30MM Precision Scope Mount, $125

18. Leupold Mark 2 Integrated Mounting System IMS 30MM, $40

21. Nightforce A194 UltraLite XTRM Extended Unimount 1.44” 20 MOA 34mm, $170

24. Wilson Combat QD AR Cantilever Mount 1.70” HGT 1.0” Tube, $60

25. Wilson Combat QD AR Cantilever Mount 1.70” HGT 1.0” Tube, $60

26. Wilson Combat QD AR Cantilever Mount 1.70” HGT 1.0” Tube, $60

27. Nightforce Ultralight One-Piece Rem 700LA, 1.125” 30MM, $125

30. A.R.M.S #12 CQ/T Leupold CQ/T Mount, $60

32. Burris AR-PEPR Cantilever Mount 1.50” 30MM, $40

33. Burris AR-PEPR Cantilever Mount 1.50” 1", $40

34. Burris AR-PEPR Cantilever Mount 1.50” 1”, $40

35. Warne Tactical Cantilever Mount w/ Dual 45 Degree Mounting Rails 1.38” 30MM, $80

36. Larue Tactical Offset Flashlight Mount LT606, $40

37. BOBRO Aimpoint Micro T1/T2/Comp M5/M5S QD Mount, $60

38. Larue Tactical LT755 Short QD Pivot Mount for 30MM Magnifiers, $130

42. Nikon M-308 Mount, Built-In 20MOA, 1.40” HGT, 1” Tube, $40

43. Nikon M-308 Mount, Built-In 20MOA, 1.40” HGT, 1” Tube, $40

44. Nikon M-308 Mount, Built-In 20MOA, 1.40” HGT, 1” Tube, $40

45. DNZ Freedom 6-Bolt Reaper Beast Picatinny Rail 311PTBR, 1.380” HGT, 30MM, $125

46. DNZ Game Reaper Remington LA Mount, 1” HGT, 30MM, $100


RINGS

1. A.R.M.S. #22-34MM Rings, 1.450” 34MM, NSN 1005-01-574-2206, $90

2. A.R.M.S. #22-34MM Rings, 1.450” 34MM, NSN 1005-01-574-2206, $90

3. Weaver Grand Slam Top Mount Rings, 1” Hgt, 1” Tube, Solid Steel, Silver, NEW IN BOX, $20

4. Seekins Precision, Med .87” 30MM, 6 Cap Screw Rings, NEW IN BOX, $100

5. U.S.Optics Rail Mounted Swivel Bubble Level BBL-300, $50

16. Barrett Zero Gap Medium Rigid Rings 13322, 1.1” 30MM, BLK, $125

17. Barrett Zero Gap Medium Rigid Rings 13322, 1.1” 30MM, BLK, $125

18. Barrett Zero Gap Low Rigid Rings 13321, 1” 30MM, BLK, $125

19. Barrett Zero Gap Low Rigid Rings 13321, 1” 30MM, BLK, $125

20. Talley Tactical 6 Screw Scope Rings, 1.275” 34MM, TAN, $70

21. US Optics High Rings P6M-3500-H, 1.38” 35MM, $125

22. US Optics ExHigh Rings P6M-3000-XH, 1.35” 30MM, $125

23. US Optics High Rings P6M-3000-H, 1.25” 30MM, $125

27. Precision Reflex Rings 01-034-01, 1.26” 34MM, $60

28. Burris Signature .22 Rings, 1” High Black, Fits .22 Grooved Receivers 420555, NEW!!, $25

37. Zeiss Victory 4 Bolt Permanent Rings, 1.00 1”, NEW IN BOX, $90

38. Zeiss Victory 4 Bolt Permanent Rings, 1.00 1”, $80

39. Talley Tactical Rings, 1.275” 30MM, TAN, $80

40. Talley Lightweight 2-Piece Scope Mounts w/ Integral Rings, Remington 700, 34MM Medium, $20

46. Trijicon RMR Footprint Mount for 30MM Scope Tube, $60

47. Trijicon RMR Footprint Mount for 30MM Scope Tube, $60

49. Kimber Steel Picatinny Scope Rings, 1” 30MM, $40

50. Vortex Bubble Level, 35MM Tube, $20

Like new, had an action in it but never taken to the range. Has full weight kit including manners extended weight. Extra butt pad weight and spacer kit, adjustment knobs. Weight 8lbs 4oz, bipod not included.

Selling a Sig 516 pistol in great condition with low round count. 10" barrel. Piston operated. $1250.00 shipped.

Selling a CMMG Banshee in 5.7-28. Gun has very low round count. Coyote tan. Comes with 7 FN mags. 6 of the mags are new in box. $1225.00 shipped.

I have a Like New with Factory Box and Factory Test Target, Sig Sauer P228 Pistol up for sale. This is an Early 1992 KB Date Code, West German model with the Highly Sought After Triple Serial Numbers. These are Super Collectable and this one has only 100 rounds down the pipe. The West German P228 Pistols are Super Accurate and are the Fastest Point and Shoot pistol that you will ever shoot. Super Smooth and Pin Point Accurate. (Just look at the 5 shot factory Test Target.) It will come with 3 Zipper Back 13 Round Magazines.

Price is $old plus actual shipping and insurance to your FFL.

)))))Sold(((((

Has anyone played around with the Speer 70 grain Varmint in a 22 creedmoor? I’m not sure where to start with this bullet.. H4350, Varget,H4831SC, StaBALL 6.5, IMR 4064, AA 2520 are the powders I have on hand.
22”, 1:8 twist, Remington 700

Looking for a LH Tikka action to buy or trade. Have a magnum action to trade?
LH Tikka std bolt works too.