I just got my rebarreled 37XC back and took it out for some barrel break in/speed up. With Berger 410s being late in coming, I've got to pick a round to load develop with. One of my main considerations is finding a bullet with sufficient expansion to enable visible splash for misses and target movement on impacts past 2500 yards.

In my last barrel I used Lehigh 353s and they were abysmal in this regard. I've got a fair number of A-Tips, but I'm not sure about them.

Now, I'm looking at the Cutting Edge tipped bullets and am posting to see if anyone who's used them could comment on their terminal performance.

Lookin for an 18” 6.5 creed conversion kit for a DT SRS.

I have two Chargemasters up for grabs. Both have the area 419 powder cups. On has machined brass and aluminum reducer the other has the MK Machining printed one. Asking SOLD for both.

Had it in my gold terminus Zeus, it’s been mounted but I sold the Zeus. Asking $300 because it’s gold and probably been shot by Margot Robbie *

*Not confirmed but it’s been confirmed that this trigger and Margot were both in the US at the same time at some point. I’ve included pictures of both… you decide.

For Sale is a LaRue Ultimate Upper. Barrel is a pencil profile, 16", 1/8 twist rate. This Upper was assembled by LaRue. It was used in two shooting courses. MOA groups with M193 and M855. Very little wear on the Upper with the exception of the 3 oclock mlok near the muzzle where a light was installed. There is very little superficial wear. This upper was serviced by a professional gun smith. The gas tub separated from the gas block. Issue solved. A combination of 1200 M193 and M855 were fired from this Upper. This Upper is in good working order.

*LOWER IS NOT INCLUDED WITH THIS SALE*

Shipped for $750 CONUS
Local Sale in NC for $700

PayPal F/F, Zelle, Venmo, Cash Accepted.

Brand new Defiance Anti-X right hand magnum action DLC, as well as Proof Carbon 22" 6.5 PRC.

$2,000 for all of it.

Thanks,
Preston

Optic has sat on my rig except for a few outings. Looking to re home as I do not need it. Comes with spuhr 5001, Tennebrex covers, di precision wind knob and standard stuff that comes in the box. 1900 tyd

Come holla

WTS Garmin xero c1 like new (still has plastic on the screen) with multicam Cole tac bag. Don’t have box. $500 shipped.

Shooting Seekins PH2 in 7 PRC. Loading once fired Hornady brass using Hornady dies. Load is 62.0 grains H4831SC at 3.300” COAL for 175 ELDX. The Hornady load data one below MAX is 62.4 grains at 3.265” COAL. My throat as measured using Hornady lock-n-load is 3.346”. So I’m 0.046” off lands. Rounds shoot great, 3 shot groups under 1/2”. For me and a
Hunting rifle I’m good with that. The bolt lift is sticky. The primers are not as flat as the last box of Hornady 175 ELDX I bought. You guys with experience, how much powder charge should I back off to alleviate a sticky bolt? I’m working up a hunting load. Rifle has 26” barrel. I’m good with 2850-2900 ft-sec as long as it’s repeatable. The factory stuff is not the same , lot to lot. I called Hornady and they said they were changing powders and charge trying to get back to the published 3000 Ft/sec. I’ll probably load the next group at 61.5 grains to see if dropping 1/2 grain fixes this.

Up for sale is an Athlon Ares ETR 4.5-30x56 with the APRS6 reticle. Comes with mkm throw lever, and mkm scope level

Glass is perfect, and scope body has a few tiny scratches from being used. I have the original box.

I’m asking $750 shipped for the package. I will not separate.

I accept PayPal G&S(customer will add 3%), cashapp, or Venmo. Optic will be shipped via UPS. I have no issues sending proof of ownership, call, text, or FaceTime.

Please feel free to message with any questions.

Thanks for looking, Joey.

As the title says, looking for a 7.62 MAMS in 3/4x24. Looking to spend $500-750, short tine is preferred.

Thanks!

Manners Pro Hunters
Rem 700 & Clones Long Action Inlet
Proof Sendero Barrel Channel Inlet
Hawkins M5 Bottom Metal Inlet
Micro Chassis
2 Flush Cups Left Side
1" Pads
13.75" LOP

$1100 SHIPPED FIRM

1 - TOMMY BAHAMA
2 - SOLD

Manners Pro Hunter *LEFTY*
Rem 700 & Clones LONG Action Inlet
Proof Sendero Barrel Channel Inlet
Hawkins M5 Bottom Metal Inlet
2 Flush Cups Left Side
1" Pad
13.75" LOP

SOLD

Lots of options out there. Lots of opinions.

Figured Id ask here amongst the people that install them in hopes of finding out what is preferred as far as ease of fitting and just plain works for the customer.

My build is going to be a wood stocked R700 in .308.

Kind of an M40esque heavy barrel with a detachable box and tiger striped walnut.



Screwing up and impulse buying wood is leading me into an expensive project.

I dont have a lot of room like a McMillan stocked rifle might offer so Im thinking an option using the standard R700 BDL inlet may be the way to go.

I like the idea of the mag release being in the trigger guard.

Ive come to the opinion this PTG product might be my way to go.....




Im assuming this uses single column magazines.

I like the idea of staggered but that probably goes against my desire to remain inside the existing BDL inlet.

Any help with my decision making is appreciated - either installation issues or end user problems.

Thank you.

Just finished my first barrel install. I’m probably over-thinking this, but is it a problem if there’s a tiny bit of resistance when closing on the go-guage? It’s closing fully, there’s just a bit more resistance opening and closing than I feel on an empty chamber. It’s not like I have to crank down on it, just something you’d notice if you’re thinking about it.

Or did I just install it with tight clearance like a good gunsmith

Ever since the move to the new server/software getting signed into the forum via the website has become a nightmare. I am no longer receiving emails for notifications nor am I getting the two-step verification codes in order to log back in.

I’ve sent general emails about the matter twice now with no reply back. I am tired of paying for a website that I can’t log into. Can a mod please contact me to fix this issue?!

have a commercial AK 74. i am wondering if any of the mag loaders available will work. magula shows a 7.62 product. have them in 308,AK,5.56,HG and they are good tools. wondering if anyone knows if it will work with a 5.45
gun/mags/ammo. or,is there another product out there for the 74?

Gen 1 March FX High Master 5-42x with the FML-TR1 MRAD tree reticle. This has the older style locking turrets.

Comes with original box, flip caps, sunshade, objective reducer, tool etc.

$2950 OBO shipped and insured
PayPal F&F , Venmo or Zelle

SOLD

Trades: Gen 3 Razor, Atacr 7-35x, ZCO 420 or 840

Both used

- AI ax 5 round magazine with seating lip bent flushed to the rest of the maga body, functions as a regular aics 5 round mag. $30 shipped

- MDT 10 round aics magazine w/o binder plate for 308/6.5 cases. $60 shipped

Hi All,

Do any of you know of an alternative to bore ride jags [http://www.boreriderbarrelcareproducts.com/p/jags.html]. The gent that makes them is retired. It seems like a great idea to protect the crown from wear. Thanks.

Whats the nicest variable 10x FFP scope? Looking to use it for team sniper matches where the carbine shooter is limited to 10 power. Ive used NF atacr 1-8, leupold mark 5 2-10, and vortex razor 1-10.

I have a gen 1 mdt acc premiere chassis sa gray and it is fully weighted internal and external weights never seen a match only couple range trips in excellent condition $925 shipped conus

Hacked Accounts

If your account was hacked, meaning you have a compromised email and they found you, went in, and changed your email. We can fix it. However, we need you to do a few things first for this to work easier.

1. Do not make a New Account with the Old or Same Email - We cannot use duplicate emails for two accounts; the system will block me. For those who make two accounts, I have to go in, delete that one, remove the email address from there, and put it back in your original account
Most hackers are just trying to access the PX with your account, you can go in and delete that stuff.

2. If you know your password was used somewhere else and was hacked, they will find you here; try changing it.

3. Hacked accounts change the email, if the account is the original email, it is not Hacked, If a person who has not sold before decides to sell or, god forbid list a bunch of stuff, they are not hacked. I get a lot of, I think this is hacked with ZERO Evidence; we need evidence. Too often, people use this to try and get us to confirm the validity of a sale, and instead, our mods will just ban it. We have a limited number of moderators, and they are not full-time and not paid, don't make them do your job.

Most of this stuff is done in the middle of the night, and takes a bit of time for the site to react or answer the hacked post. So if you get an email your account was changed, email us immediately or have a buddy if you can't, give them your User Name and Email we can fix it.

In any case, whether you email me or contact the site as a user, I don't care the reason, I need your User Name and Email. Too many people do nto do that as assume we know. Especially with a hacked account, your email has been changed and in your communicate if you don't give me the User Name I can't find you because, ah, the hacker changed your email address.

Details matter and get the situations solved very quickly. If you require me to hunt for details, chances are your window will close and I just delete it all. I will nuke the hacked account and you start all over again.

I just bought a savage 110 tactical in 6.5CM, I have the barrel, stock and bottom metal for sale. I am looking to budget build a 6CM with a 26" outlier barrel and chassis. My only concern is the outlier 2 piece chassis. I have been looking into a MDT XRS or LSS-XL Gen 2, but im really trying to keep the budget low. Thoughts?

loading a bunch of 223s for my AR, I check weight on my powder every 7 bullets or so,I also weight the complete bullet after it's done just making sure no mistakes, normally it's
175. To 177 I'm checking I get a weight 189.5 I pull the bullet apart perfect powder weight bullet 55grain but I find out the brass is a 5.56 the brass for a 223 is 95. The 556 is 108.5 I load 223 specks I realized the 556 has more pressure didn't realize the brass was alot heavier. Shouldn't be any problems shooting right. I'll take any replies.