For sale:

Otto NoizeBarrier micro in-ear hearing protection. These were used very little, less than an hour. They work great, but I prefer over the ear. Includes everything that comes with them new including the manual, charging cable, extra silicone and foam plugs, and original box. I threw away one set each of the silicone and foam plugs that I had used with them, so all of the plugs that are included are new.

$325 shipped SOLD

I accept discreet PayPal or Venmo (F&F ONLY)

Thanks for looking!

Larue 16” AR10 - .308
88 rounds recorded 168 FGMM

Comes with extra 14in barrel with one box of 168FGMM through.
Also comes with proper hand guard to fit shorter barrel. Tan furniture grip/stock. Three mags.
Selling due to unexpected heart procedure.

Shoots lights out!

$4,300 for all listed

My dad had this to put sights on his Glock and it has not been used more than one time. It still looks like new. He paid $75 for it and I will let it go for $55.00

Lefty Vudoo v22 360. 30 MOA rail. 26inch barrel chamberd by Vudoo. I think its a Bartlein barrel and the contour is 0.90 from the breach to the muzzle. 4000 rounds on action and barrel. ATS tunner included. Triggertech Dimond straight included. 2 Vudoo mags and 2 LRI plastic Mags included. Brand new bolt stop included. Original firing pin spring included. Stiffer spring installed from Vudoo for cold weather reliability.

$2100 shipped and insured. Your FFL must except from individuals.

No trades please.

Selling my Zermatt Arms TL3 16.5 inch Carbon Fiber Barreled action in 6mm Creedmoor.

16.5 inch 1:7.5 twist CARBON FIBER PVA Chambered Osprey Barrel (230 rounds) on the barrel all factory Hornady. Regularly getting .5 inch groups with factory Hornady 80 grain ELDVT.

The action and bolt were professional cerakoted in FDE by LTM Refishing. The barrel was professional cerakoted in FDE by PVA’s

SOLD

$OLD

20” Proof barrel 1:7.5” twist (200 rounds through barrel) willing to trade for 20” Proof 5.56 barrel

.750 riflespeed gas block

Rexus 6 Arc bolt

2x 15 rd duramags

Looking for a March-FX D10SV24FDIMLX with DR 1F reticle.

Double rifle pouch with gap, single rifle pouch mid length, 5.56, Multicam, EXCELLENT CONDITION, $45 shipped, DISCREET PayPal F&F, no trades.

Would any of you guys know someone that has a set of 34mm vertical Larue rings or where I could find some..? I know this isn't really the right place to post this but I'm a new member here and can't post in the buy/sell group yet...Thanks

New never used
$old shipped
Zelle or Venmo

This has been gathering dust for too long and needs a new home. It is clean, well cared for, fun to shoot, and accurate.

DOES NOT INCLUDE BIPOD.

Model: POF P-415 Gen III
Bore: 5.56 NATO/.223
Barrel Length: 16.5”
Twist: 1:8—5R

• Charging Handle: Strike Eagle
• Trigger: Triggertech Diamond AR15 2 stage.
• Stock: Magpul 5-position CTR with MAG317 enhanced rubber buttpad.
• Buffer Assembly: Austin Precision tube, Vltor A5 buffer and Geissle Super 42 spring.
• Cover and Pad: God’s grip and Ergo
• Brownells Tension Pin
• Sling Attach: Magpul ASAP

Normal minor wear marks on top rail and at charging handle. Nothing extreme.
DOES NOT INCLUDE BIPOD.
Ship FFL to FFL.
$1500.00 $1675.00 shipped. Check, USPS Money Order. NO TRADES.
Buyer is responsible for understanding and complying with their respective state firearms laws and restrictions.





100 yard groups from prone.

XLR Magnesium 4.0 Chassis with folding stock adapter, bag rider, and MDT Elite grip, will include the XLR thumb rest which is not in the pictures.

Chassis was professionally cerakoted by LTM refinishing.

Chassis is in great shape but does have minor cerakote wear on the Arca rail from tripod attachment and minor wear on the cheek riser see photographs.

Weight on my digital scale is 2lbs 7.8 ounces as it sets, but I will admit the MDT grip is rather heavy in comparison to the lighter grips options.

SOLD

Rings-IOTA Triad Z1

• 34MM
• Low
• Aluminum 6061-T6
• 4- Socket head cap
• Under-angled screw
• Key system. Minimizes rail shift

$80.00
$95.00 shipped CONUS.

PP F&F (no comments), PP +4%, Check or USPS Money Order.

I’m using a Caldwell Rock front bench rest and a rear bag. My vertical is great, I can constantly see the reticle swaying horizontally. I’ve tried different grip pressure, adjusting my rear bag, getting lined up, etc. Still can’t get to where I’d like to be.

All tips appreciated.

J-Frame Barrel. This is a S&W product. Not aftermarket.

• Shoots .38 or .357 Magnum.
• All stainless steel 2 1/8” fluted barrel
• Trijicon Tritium night sight
• Ported by Mag-na-Port

J-Frame Round Butt Grip. OEM.


$150.00 $125.00 shipped CONUS. PP F&F, PP+4%, Check, USPS Money Order.

Phantom Precision Barricade Bag V2.

• Lite Fill.
• 12” x 4 x 4.
• Taper Heel
• Non-skid surface
• Bungee cord and carry strap.
• No rips, tears or cuts.

$ 45.00 $50.00 shipped CONUS. PP F&F (no comments), PP +4%, Check or USPS Money Order.

No Trades



$

I have a mk1 amp annealer. It does not have aztek mode it comes with 3 pilots power cord and cover. $800 shipped conus

I have a mcmillan u10-7 for a rem long action
It has a pic rail up front flush cups on the bottom and both sides with an adjustable cheek. It’s been bedded for a rem 700 long action and m5 bottom metal and professionally ceracoated $700 shipped conus

I have a vortex impact 4000 lightly used on a 223 works perfectly lifetime warranty $1000 shipped conus

He likes seafood!!


Login to view embedded media

Selling my like new GrayOps 30 mm, 0 MOA, 1.125” scope mount and level. I used it one time at the range for less than 30 shots. No dents, dents, or scratches. It’s a great mount, and the second one I’ve owned. Both mounts left zero ring marks on my scopes. I’m selling it because I no longer have a 30 mm scope.

Asking $290 $275 $200 shipped/insured.

If you have any questions or want to see more pictures, just let me know.

Thanks for looking, Matt.

So I put together a non clone correct SPR type upper and have been struggling to get the groups I had hoped for. Trying to get some feedback from some more seasoned shooters regarding gas gun accuracy shooting. I mainly have shot bolt action when trying for precision and so I’m not sure what to expect realistically. I’m trying to do some basic load development using 77 gr OTM from Mid South Shooters. I’m loading new Starline brass with Varget and CCI 400 primers. Rifle is 18 inch PRI Douglas stainless MK 12 barrel 1:8 twist Geissele Mark 18 Arca handguard on BCM upper receiver matched to my BCM lower with Geissele 2 stage trigger. Using B5 Sopmod stock with a bag rider. Shooting prone with bipod on front and rear bag. Optic is Meopta Optika 6 3-18X 50 in ADM Recon mount. taking my time and shooting groups at 100 yards, checking all the boxes of solid position, breathing, trigger control, follow through,ect…most groups have been larger than moa. I have one sub moa 10 shot group so far in 200 rounds of attempting my best. I can shoot in the 3’s with my Tikka CTR 308, but don’t know what the deal is so far with this gun ammo optic and shooter combination. Any thoughts? Maybe I should try some 75 gr Hornady or some 69 SMK, but not really blown away so far with this barrel. I’m not saying it’s not just me shooting poorly. I hear a lot of people online claiming 1/2 moa groups with precision gas guns so I’m thinking I have a dud, but then I watch 9 hole reviews comparing a PRI douglas to a BCM 18 inch 1:8 and their best 9 shot group was 1.3 inches with factory Match ammo…I’m fairly new to precision shooting, reloading and especially precision gas guns, so what’s some thoughts dudes of the more seasoned variety? What should I focus on?

The airman was murdered, no UD involved. I guess it was a good try to blame the gun.................

FDE Unity riser in excellent shape. 75 shipped Venmo