Have a few pre-fit barrels in stock

1. Proof Prefit - 6mm Creedmoor

Tenon: Impact 737R/Lone Peak
Length: 26”
Chamber: 6 Creedmoor
Twist: 1:7.5
Contour: Competition Contour
Muzzle Threads: 5/8-24

2. T3/Mcgowen Prefit
Tenon: Impact 737r or Lone Peak Fuzion/Razor
Length: 26”
Muzzle Threads: 5/8-24
Weight: 6lbs. 8oz
Contour: 1.200” at the breach, 1.00” at the muzzle
Material: 416R
Twist: 1:7.5

Available Calibers:
.25 Creedmoor - Alpha Legacy .150 fb
6.5 Creedmoor - Alpha Legacy .199 fb

All barrels cut with Alpha Legacy Reamers to match Alpha Brass

Defiance Anti Long Action with magnum bolt face fully nitrated with 20moa rail. $1250 shipped to your FFL

Got referred here by a buddy. Have been lurking for weeks and taking it all in. The stickied threads are great. Lots of experience with pistol and short rifles but brand new to long rifle and scoped distance shots. So much to learn and last few range trips have been great.

I wanted to "expand my horizons" a bit by playing with my first wildcat cartridge, and I landed on the 7mm Sherman Short. I've been hand loading for 30 years or so, but I've never messed with anything without published load data before.

I have some some fresh brass, Berger 180 Hybrids, and H1000 to start with. I want to shoot a milder fire-forming load through 50 cases to get started. Is 54 gr of H1000 with the 180 a reasonable place to start, or is that too low? The load data on the Sherman site shows a 180 ELDM with 60.1 gr of H1000 and a 180 VLD with 65 gr. I generally like starting 10% under and working my way up slowly, hence where I came up with 54 gr.

Anyone with experience with this cartridge mind sharing their starting load and work-up experiences? The only threads I could find on it were older and only discussed loads closer to max...and a lot was with the unobtainable RL26 to boot.

Good afternoon,

My wife says we need to clean out some of our stuff we are not using anyway, so this is a great reason to do so.

I am going to use this thread to post what we have for sale and the price shipped and insured TYD in the lower 48. Some of the items are BNIB and have not seen the light of day and were not taken out of the box for pictures as, they are still in the box.

Please PM me for any of the items and first come/first served to keep down scammers. I have a clean reputation on here and I will provide whatever is needed to verify the goods and identity. Some items, if I have boxes ready to ship will ship the day after sale, some may take a day or two as I will have to get boxes made to fit, just giving you a heads up.

I will communicate that all to you if you make a purchase, and I will remove items as they are sold and add new items. Venmo or PayPal F&F

These are all NIB
1. Vortex Viper HD 5x25 Riflescope FFP VMR-4 Reticle (VPR-52502) --- $800.00


2. Vortex Razor UHD 12x50 Binoculars (RZB-1250) --- $1300.00

3. (2)Athlon Midas G2 Pro UHD 12x50 Binoculars (113011) --- $350.00 ea



4. Athlon Midas Pro UHD 10x42 Monocular (113015) --- $250.00

ATX Folding chassis direct from Europtic. Short forend to run 16" barrels. Includes night vision bridge and the top rail for the bridge (no side rails). Includes the MDT grip.

SPF shipped

Would consider trades towards a LMT MWS 12.5" Upper, LMT AR10 BCG, 13.5" 308 barrel or 14.5" 6.5cm barrel.

Burris XTR 2 1-8x24 MIL scope for sale. It’s in like new condition. Mounted but never used. Comes in a Warne mount. $725 shipped.

Holosun 512T red dot sight for sale. Rattle can paint job. Should come off pretty easily if you want it back to black. Minimal use - had it on an airsoft setup.

$400 shipped.

Does anyone have this can and think this would be worth it in anyway? There are some bad reviews I've read on the can.

Never mounted, with hardware.
$40 shipped lower 48

I can make weight with my folder, so sticking with that. This was off a Masterpiece Arms Ultralight. Not sure if it will fit on a BA Comp or Hybrid, but I can try and take measurements if that's what you need. Easy way to drop weight if so.

$75 shipped.

Working on another build....use case is a 16" 6 ARC SPR



Amazon list for tools/supplies mentioned on the channel:
3QMZQX5CVKWR2

Build list:

• Upper receiver: CMT Ultra Precision Billet Upper (# UPUR-1) ($200) (slight thermofit)
• BCG: CMC Enhanced 6 ARC BCG (# 81635) ($150)
• Gas tube: Luth AR mid-length stainless gas tube ($13)
• Gas block: SOLGW V2 (4150) Set Screw Gas Block (# GB750V2) ($35)
• Barrel: Blackhole Weaponry 16" Mid Length 1:7 416R Nitrided Custom 6mm AR-15 Barrel (3 groove polygonal) (standard profile) ($380)
• Handguard: Icon Defense 13” Drive Lock (# HGDL430BLKTI) ($288)
• Charging handle: Breek Arms Warhammer Mod2 Micro Latch FDE (# BRK555FDE) ($40)
• Muzzle device: Zev Tech 7.62 Flash Hider/Compensator (# ZMD-762) ($25)

Total cost: $1,131

Build videos:

1. AR-15 16” SPR Upper Build 6 ARC (1/5): Taking Barrel Measurements and Checking Headspace
   Login to view embedded media
2. AR-15 16" SPR Upper Build 6 ARC (2/5): Attaching Gas Tube To Gas Block & Installing Dust Cover
   Login to view embedded media
3. AR-15 16" SPR Upper Build 6 ARC (3/5): Torquing Barrel Nut and Muzzle Device
   Login to view embedded media
4. AR-15 16" SPR Upper Build 6 ARC (4/5): Installing Gas Block and Handguard
   Login to view embedded media

Barrel inspection notes:

• Weight: 36.5oz
• Gas system length: Mid-length
• Gas port size: 0.086”
• Gas block journal: .7505”
• Barrel Extension: 0.9985”
• Headspace gauge check (on fully stripped Radian bolt):
  • Go 1.1901”: closes
  • Field 1.201”: doesn’t close

Upper build tools video (1/2):
Login to view embedded media Upper build tools video (2/2):
Login to view embedded media
Link to AR-15 upper build tools post:
https://www.youtube.com/post/Ugkxl7ASgT3q4m5A1T9gGwWvzNZD85zbZXqC
Link to AR-15 upper build steps post:
https://www.youtube.com/post/Ugkx-OnosmRoszGgOf4Z-qEJY6IQqnokqAE3
Link to threadlockers and assembly grease post:
https://www.youtube.com/post/Ugkx4dIT6Ls9f7DohFWdi8EIEJ2y3Lztq8WY

Nothing wrong with it, just like MPA grip better.

$45 shipped.

I have a set of the sig 3k bdx laser range finding binos up for grabs. Comes with sig bino harness, rrs cinch (in the pictures). Glass is unmarked. 550 tyd

Zermatt Bighorn TL3 short action for sale. Comes with magnum bolt face. Super slick action. No issues. Only selling because I have two many of them and need to declutter the shop.

Scope base is 20moa I believe and has been cut at the end. This was to accommodate the Cadex chassis it was in.

$1100 shipped
FTF in Columbus Ohio $1050

No trades. Emphasis on decluttering shop

Currently not looking for any trades, can accept paypal FF/Venmo, heck you can send a personal check as long as you don't care that I won't ship it until it clears my bank. Can provide more pics upon request.

Elite Iron REVOLUTION BIPOD Lightweight Aluminum Model, with 3 interfaces (std offset picatinny, std offset extended picatinny, high offset extended picatinny. Lightly used, no real damage aside maybe some scuffs. $650 shipped/insured



*SOLD* Accu-tac WB-5 lightly used with picatinny clamp *SOLD*
*SOLD* Accu-tac BR-4 GT only kept for backup, with picatinny clamp *SOLD*


BT12 QK monopod, don't believe this has ever been used, $70 shipped/insured

Not looking for any trades at this time. Happy to provide extra pics etc. upon request. Paypal FF, venmo, heck you can send a check as long as you don't care that I won't ship until it clears my bank. I don't do MO's cause our post office never has more than a couple hundred in cash.

Sako TRG 3-ring mount, 30MOA, 30mm, never used, bought it for my TRG but ended up putting a 34mm optic on it. SKU: S151F922. $250

Seekins MXM 30mm 20MOA mount, was mounted in great condition, no damage $150

*SOLD* Warne Skeleton Gen 2 30mm mount, 0 MOA, good condition, no damage *SOLD*

I have some 338 lapua brass I would like to sale in a lot. Its 242 pieces. Some is tumbled and some not!
all once fired. $425 shipped or open to offers. Shoot me a PM

Brake down
130 lapua
22 vega
15 plus
1 fc
22 s&b
23 BHA
30 Hornaday

FS: Accuracy International AT with the AX buttstock conversion.

Approximately 4000 rounds on action. Choice is 6.5 or 308 barrel (have many lengths so can pick what you prefer).

Comes with 2 AW mags and ARCA rail.

Once sold will have additional barrels for sale.

New Manners T4A Elite TAC, GAP molded. MCS-DBM Gen 2 mini chassis with one 5-round mag. For Remmy 700 SA and clones, M24 barrel channel.

Not interested in any trades.

$1400 shipped (FIRM).

Ships CONUS only.

1/2-28 threads.
$90 shipped

Didn't see this topic here in the pit yet, but sadly several small rural towns were literally swept into the ocean by Typhoon Halong 5 days ago. Alaska National Guard has taking control - some towns won't see energy or supplies for months and mass evacuations already evacuated hundreds.

Login to view embedded media Login to view embedded media

Looking to buy one or two barrels for a curtis axiom i have laying around. Would like a carbon fiber 7 saum barrel but all are welcomed. Thanks

I was wondering if anyone has any experience with both these recoil pads? I have a mdt crbn stock in a light weight 6.5prc with a supressor was wondering which one people like more my buddy has a obi and it seams to work good but also wondering about the backfire one

Selling my PWS MK111 Upper. Has a 200 rounds through it. Great shape. Has Keymo muzzle device.

$600 shipped