Up for sale is my sig p320.
Posting this without the DPP or the x300.
Will come as shown.
Sig custom shop FCU.
TXG tungsten infused frame
PMM barrel/comp combo
1x 21rd magazine
Shoots super flat.


$500 shipped to your FFL.

Searching for a 6.5 carbon fiber barrel 26" preferred for a full thread Zeus, let me know what you have or maybe where I could get one in a timely manner thank you!

Up for sale is a used but good condition x300u-A.


$210 shipped

Heading to Major Land Sniper Cup, ask me anything I have a full day of travel

Having been an owner/shooter for slightly over 10 years now, I confess I'm way behind most I of you in re: the size of my "inventory." I do have a few pieces here and there in each category (shotties, pistols, revolver (well only one of those), and rifles). And I have he ammo for all of them. No NFA stuff yet, but I'm working on it.

But that is nothing compared to most of you, I think. A lot of you guys have overflowing safes, etc. maybe 2 or 3 of them. I'm amazed at some of the inventory collections you have. My basic question is, how did you acquire all that inventory? What led you to build the inventory you built? I don't need or want to know exactly what you have, but what process did your brain go through in the name of building that inventory. Did something in your brain just keep saying, "Buy...Buy...BUY!!!" or were your acquisitions more "measured" as are mine? DId you just have to have one of each brand or something? Did you react to the "new brand/model of the day" and go out and buy it? How did you acquire your present inventory?

I ask, because for whatever reason, I don't seem to have that "buy bug." I don't need the latest, greatest piece. I don't follow the "item/brand of the day" thing at all. I make very specific acquisitions for very specific reasons/purposes. And I haven't in almost 2 years (some of that being "financial," but). I don't need to buy everything on web, etc. etc. only what I want/need. Granted I rarely sell anything but, at this rate, I may never catch up with most of you. I think I have all my calibers covered (.22LR, 9mm, .38 SPC, .45 acp, 5.56 Green Tip and .308 win (12G 00 Buck, 12G slugs, and other various kinds fot the shotties).

And I don't see acquiring much more in the future, either. If I do anything, it will most likely be in the NFA area. Maybe some custom builds like a Wilson Combat 1911 or a Dan Wesson. Certainly my Colt SAA Peacemaker. And, I may replicate 1-2 of my EDCs to have them ready for whatever reason (i.e. I am forced into a DGU and it gets confiscated... Hopefully never, but...). But again, this is nothing compared to you guys.

How did you folks do it? How did you build your inventory and how long has it taken? Hopefully, I"ll catch up with y'all, someday... maybe.

Used Meopta 15x56 binos. I have used these for several years, excellent glass, as close as you can get to Swaros without paying the extra $1000. I am only selling because I moved to a 15x with a reticle. I wish the glass on my new set is clear as these, but I do use the reticle a lot. These were purchased directly from Meopta several years ago.

I have always kept it in a Storm Case, I will include this in the sale.

I also include a link at the bottom that shows it is registered for the warranty.

$1000 Shipped- insured.




















Warranty Card

Im in the market for a whole new precision setup. I've only previously reloaded straight wall pistol on a 650 so this is process I've never had to implement.

An annealer is one piece of the puzzle that I am planning on getting. Particularly the AMP Anneler.

Just saw this being listed on a few reloading vendors.

ARC Precision Ultimate Annealer​

Login to view embedded media
Anyone have any feedback on this unit? Exciting times these days.

Like new. LaRue Tactical 30mm QD, 1.28" high, discontinued.




$225 shipped.

ARC M10 QD-L 30mm 30MOA scope mount 40mm height for pic rail.

I had a 50mm scope in these on a 6.5 Creedmoor build.

$165 shipped via PayPal goods or Venmo goods

This thing has lived a hard life, shot out couple barrels, milled slots for carbine and patrol length gas blocks, few layers of krylon, big ass dent on the 9oclock. Same for the BCM upper. Only shims included are what I used to time it to the upper. Wrench tool included as well.

Trades welcome (73eldms, 8208 XBR, factory 108eldm 6arc ammo, proof ar barrels etc)

$300 tyd for rail, tool and upper

I was able to buy one of the LMSS spotters earlier this year for $400 when they were liquidating them.

I would really like to get some of the rails I have seen for them but the only thing I can find is this system from BO, and its $600.

Is there anywhere to buy individual rails or a cheaper alternative?

Thank you,

Pretty self explanatory 3d printing cleaning gadget. Really helps you knock out the cleaning process.
Full kit comes with: 3 bottles. Two droppers, one holder.
35$ shipped to ur door.

Available for :
ACC ELITE
MPA MATRIX/ BA comp
W/ o without match slot

Available in most primary colors

Geissele mk16 15” black tabbed handguard with barrel nut. Was removed from a new take off Superduty rifle.

$275 shipped

PayPal FF, Venmo or Zelle

For packs/rucksacks with large compartments what is your preferred way to organize and store smaller items? Also interested in ways to keep small and/or valuable items tethered. My worry is that I will pull something out or the pack will get rolled with a compartment unzipped and the contents will spill out.

Some of my other packs have no internal pockets or loops. I end up having small items in zip lock bags with those inside zippered bags and paracord tying them to MOLLE loops or even zipper pull loops on the outside of the pack. Bags in a bag in a bag make it slow to retreive things.

Pictures, tips, and product suggestions are welcome. Thanks in advance.

Picked up my new precious this morning...



Sometimes it's good to live 5 minutes from their shop

I'm looking at adding / buying a reverse osmosis system.

I found a GE and the reviews are good but it seems like the filters and membrane are way overpriced.

Do you have an RO system? Any brands or models I should look at and consider?

I have an everpure filter that is good but the Solids are still high and my ice maker is having issues


Any tips, tricks, links and feedback is appreciated

Add a dasher deck to your Area 419 magazine extension. If your running a 6BR MDT Metal AICS Magazine and want to use the Area 419 magazine extension, drop in a dasher deck and the spacer wont fall down into the mag extension. No need for JB weld or any other DIY fixes. These are made specifically for the Area 419 magazine extension and MDT 6BR magazine. I shot about 2K rounds this summer with absolutely zero feeding issues.

$20 each. Shipped CONUS. Discounts for multiple units.

PayPal F&F

* You are purchasing just the black Dasher Deck. Other items in photo are for your reference.

I have 8 on hand.

I've got a gently used DNT 7-35 in mils with Arken rings. It's been a fantastic scope and the glass is great, just funding something else. Still looks new.

$550 shipped with rings and everything it came with. PayPal or Venmo

Impact precision 737 action RH 90 degree
223 bolt
Brand new spring and firing pin
0 degree OR 15 degree can be included
Redding type s match dies
.247 TIN bushing
2 MDT 10 round magazines
190~ star line brass
40~ 88 gr eldm bullets
bartlein 1/7 twist 29” heavy palma
5/8x24 threaded muzzle
4100 rounds on the barrel shoots excellent chambered 223 wylde

$2100 shipped to your FFL OBO

WTB KAC M110 suppressor. Indifferent between FDE or black.

Thanks!

SOLD - New Lapua 223 Rem brass. 303 pieces total. MTM ammo boxes are included. $75.00 shipped per 101 pieces.




SOLD - Lapua 260 Rem brass. Pulled from Berger ammo. 220 pieces total. MTM ammo boxes are included. $120.00 shipped per 100 pieces and $24.00 shipped for the 20 piece box.

I just caught these, been patiently waiting and now, mulling over whether to jump in early or wait and see what others think? Any early reviews from the typical pre-public available folks like Big Jim Fish out there?

What’s up peeps!!

Both uppers are brand new never been fired other than from factory

PWS MK118 MOD2 .223 Wylde - $850

PWS MK116 MOD2 .223 Wylde - $850

Took scope out of the box and mounted in vortex pro rings. I've fired about 50 rounds under it out to 1050yds. Great glass for the money, tracked perfectly.. It is a ffp with the vmr4 reticle. Has box,paper, tool, etc...Asking $900 with the rings OBO. Selling only to help fund a Nightforce. Yes its still mounted to my deer getter and it was purchased new. Shipped pp ff,venmo,zelle

Are any vendors on the Hide able to come close to ExpertVoice pricing on the Nightforce ATACR F1 series? Specifically looking at 7-35x and 4-16x in mil-XT--though EV doesn't offer the 4-16x which is unfortunate.

Figured I'd go direct to NF for the 4-16x like I had in the past with the emailed price list, but I believe they're having all mil/LE individuals go through EV now?