Suppressors Form 4 wait time

3 approvals from 07/06/22
2 approvals from 08/16/22
9 approvals from 11/15/22
1 approvals from 12/16/22
4 approvals from 02/02/23 (89 days!!!)
This is what @USMCSGT0331 looks like in real life. That why it took only 89 days! Congratulations!

555490ad2b3579f6ff8045180f2cad17.jpg
 
I'm curious if anyone else has had a similar experience. Last week I injured an index finger. It required stitches and the pad of the finger will have scar tissue.

That will, obviously, make the fingerprint different compared to previous prints submitted.

If anyone here has had a similar experience, did that create any problems for you?

The next time that I submit a Form 1 or 4, I'll probably attach a letter explaining the difference. Any thoughts on that?

I printed/submitted my SS eF4 in back in July/2022. A few months later, I was working out in my shop cutting some metal, and I burned a perfect triangle into the pad of my left index finger. I submitted 3 eF1s the next day. My eF1s--with the perfect triangle of no prints--were all approved in under 30 days.

My eF4--with perfect and complete prints--took 298 days to get approval.
 
  • Like
Reactions: Longshot231
I printed/submitted my SS eF4 in back in July/2022. A few months later, I was working out in my shop cutting some metal, and I burned a perfect triangle into the pad of my left index finger. I submitted 3 eF1s the next day. My eF1s--with the perfect triangle of no prints--were all approved in under 30 days.

My eF4--with perfect and complete prints--took 298 days to get approval.
So far it doesn't look like the scars will look that bad. After it's completely healed it will, hopefully, look like a couple of lines across the finger tip. The good news is I think I'll still be able to squeeze a trigger as good as before, even if it's the weak side.
 
Submitted: 7/25/22
Approved: 5/10/23
Trust
Silencer central
Banish45
Signature is a 2 letter squiggle basically unreadable.

Not sure if it was just the time for me but I contact my congress representative 2 days ago and sent them everything and it was approved today.
 
  • Like
Reactions: Beefmanne
And how are they doing the new SBR requests for the brace situation in 40 days? And yes that's a legit time frame, personally witnessed with another person recently.
 
And how are they doing the new SBR requests for the brace situation in 40 days? And yes that's a legit time frame, personally witnessed with another person recently.
My last SBR Form1 only took 19 days after my prints were received. That was just last month. Yet the form4’s are basically hitting 300 days. Ridiculous.
 
  • Like
Reactions: Beefmanne and FuhQ
I had another suppressor that was submitted same day and was approved 4/2. It’s all across the board

i had two on the same day last year. one took 77 days. the other took 268. ridiculous inefficiency.

why those dont show up together under my efile account is baffling.
 
Go by certification date.

Just go out 240 (8 mo) on your phone, mark the date on your calendar and have it ring a bell for you. That way you only stress for 30+ days instead of 270+ days!

Or forget about it completely and youll be surprised when you get the approval email. Stress free
 
I called last Wednesday, and had the guy check all 5 of my pending certs... My longest was at like 277 days (8/19/22), and he said it had been assigned, so it should be very soon. I asked about batch-approvals, and he said that he wasn't an examiner, but he had also heard of some recently doing that to help backlog. I jokingly asked if he could put in a note request under mine. He just laughed, and said he wished he could, but it didn't work that way in the system. He was pretty nice, so I can't complain. So, based on his info, I'm hoping it'll be this week... Tomorrow will be 7 days since I called, and he said it was assigned, but the other 4 still showed "pending" and weren't assigned. So I don't think I'll get lucky enough for a batch this go-round, but maybe on one of the next 4? 🤷🏼