Recent content by badbot

  1. B

    .308 3000+fps?

    Re: .308 3000+fps? It is not that hard to hit a quarter at 1000y you just need to do some prep work. find a nice 4 foot by 4 foot plywood sheet and paint it bright white for high visiability. place it at 1000y and lase it to insure the correct range. take temp, wind and baro.pressure into...
  2. B

    Range Report: Alliant 2000-MR

    Re: Range Report: Alliant 2000-MR I hope you take a run at the 208gr hornadys
  3. B

    Help a friend of my girlfriend out! (Updated)

    Re: Help a friend of my girlfriend out! 859 she slipped to 21st place anyone have a powershell script? got 200+ in my domain
  4. B

    Photos BAD WEEKEND!!!

    Re: BAD WEEKEND!!! have you thought of trying this to break your streak?? http://i52.photobucket.com/albums/g21/garddog223/YIEao.gif
  5. B

    Gunsmithing Could my gunsmith have screwed up?? AICS build.

    Re: Could my gunsmith have screwed up?? AICS build "After he modified the stock he said he still wasn't 100% happy with how much of the action was contacting the stock. He said it was almost like my action had a bit of a bow in it. He suggested I try shooting it and see how it goes, but if it...
  6. B

    Bad Winchester Brass

    Re: Bad Winchester Brass http://www.winchesterguns.com/customerservice/qna/detail.asp?id=244 customer service info and phone number
  7. B

    RAD bottom metal teaser

    Re: RAD bottom metal teaser <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MSG Janoski</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: z71rat</div><div class="ubbcode-body">If these would only fit the...
  8. B

    Let's solve this savage dbm problem

    Re: Let's solve this savage dbm problem does anyone have a mag for the AR10 to mesure? IIRC they were a slight stagger 308 and might be the size we need. they go for $50 - 60
  9. B

    New Cheek Piece - Updated! Group Buy

    Re: New Cheek Piece - Updated! I ordered 1 directly but I stated this is where I got the info I hope it counted
  10. B

    Let's solve this savage dbm problem

    Re: Let's solve this savage dbm problem I suggest finding some UHMW, it is plastic but very tuff. white cutting boards are made from it. ebay or local plastic suppliers. it is almost as slippery as teflon so it should be great as a follower. easy to machine too.
  11. B

    My $60,000 case trimmer, VID ADDED

    Re: My $60,000 case trimmer haha sorry in 2033 cases become self trimming
  12. B

    The definition of frustration!!!

    Re: The definition of frustration!!! my neibor here in AZ is from il. ? I wonder why
  13. B

    Gunsmithing HOLY SHIT I BROKE THE LATHE! HELP!!!

    Re: HOLY SHIT I BROKE THE LATHE! HELP!!! I keep the johnson AWAY from the lathe, mill, drill press, hammers and other cold hard metal objects.
  14. B

    Gunsmithing HOLY SHIT I BROKE THE LATHE! HELP!!!

    Re: HOLY SHIT I BROKE THE LATHE! HELP!!! good thing no body in here would make fun... turn it off, put a chuck key in hand turn it back and forth while trying to shift it, if you find a gear remove key and test.
  15. B

    Fieldcraft WTF? Is camo worth this much?

    Re: WTF? Is camo worth this much? 3 bidders #1 real $89 #2 #3 shills bouncing back and forth
See more
Top Bottom
Back
Home
Forums
Merch
Alerts