• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Recent content by ChrisNZ

  1. C

    Carry A Pocketknife!

    Years ago I knew a guy who was part of the security detail for one of the three (yes three, it's Africa!) mayors of the newly formed Ethekwini Municipality, formerly Durban. The lady mayor had attended a rural function, complete with ox on the spit, many hours drive from Durban. The driver had...
  2. C

    What size steel are you shooting out past 1k?

    We have four full size IPSC headed targets made from 3/8" AR500 as well as "swinger" attachments (that fits on the frame) that has a 175mm (6 7/8") round plate that locates over the shoulder, left or right of the head, with about a 1" gap. It swings round to over the other side when hit. We...
  3. C

    Big Thank You. Great service from hide member,skinney_7 O'Neill Ops

    You always read plenty stories where things have gone wrong, this is a positive feedback. Living in New Zealand, some people are reluctant to send stuff that far away and opt out. skinney_7 (O'Neill Ops) went out of his way to send me a chest bino pouch for my Vectronix. Took a while to find...
  4. C

    APA Gen II Fat Bastard & Little Bastard

    Other than the locking nut for indexing, Fat Bastard design looks just like these made here in New Zealand: T3 Brake Have one on my TRG 42 in 338 lapua. Best muzzle break I've used so far. Target stays in view through scope and often watch impact through scope at longer ranges. Who copied...
  5. C

    Suppressors Silencer Co Shotgun Suppressor

    Was shooting suppressed shotguns, to cull rabbits, in the UK in 2007, and even then suppressed shotguns had been available for a lot longer than I can remember. Hardly a new concept and certainly not "the first"
  6. C

    Gunsmithing Sniper's Hide visits Bartlein Barrels Part One: Barrel Break In

    Thanks to chaps at Bartlein, taking the time to share the knowledge and giving an insight into their operation. Thanks Frank to making it happen. Looking forward to some more.
  7. C

    Gunsmithing PTG? Anyone know what's going on there?

    I've had great servcie from PTG. They made me a custom carbide tipped shotgun rim recess reamer, exactly to my specs and beautifully made. Yes, I waited a bit but well worth the wait and level of workmanship and precision far exceeds price. Couple weeks ago sent Sheila an email asking for a 6.5...
  8. C

    ANTI CANT on scope or on rail?

    The spirit level is a reference device. As in the previous comment, as long as it is securely mounted and properly levelled, it shouldn't make a difference. Using a Spuhr mount with built in level makes it secure but unable to adjust. Mounted on my TRG, for true level with crosshairs true on...
  9. C

    Gunsmithing Who sells Bartlein 6.5 barrels that will export to New Zealand.

    I emailed Grizzly asking if they export and haven't had a reply. I normally order from Brownells but they out of stock and haven't had a reply regarding time frame on new stock. Thanks for the replies.
  10. C

    Gunsmithing Who sells Bartlein 6.5 barrels that will export to New Zealand.

    Hi Guys. Hoping someone can point me in the right direction. Almost 2000 rounds through my 260 Tikka T3 Sporter and anticipate needing to rebarrel soon. Looking at buying a couple Bartlein 6.5 5R 1-8.5 28 and 30" barrel blanks. Any suggestions as to who has stock that will export to New...
  11. C

    6.5mm Creedmoor vs 6.5mmx47 vs .260 Rem

    Am using Lapua 260 in T3 Sporter, have 400 cases I've cycled through 4 1/2 times, with shoulder bump, trim, full clean and anneal after every third firing, otherwise just neck size with Redding comp s type neck bushing dies. Robert Whitely was a pleasure to deal with and great service from...
  12. C

    6.5mm Creedmoor vs 6.5mmx47 vs .260 Rem

    Just rechambered my Tikka 595 .260 to 6.5 SLR. Factory 23.7" barrel, new in 260 had 200 rounds through it when I rechambered it. In 260 had 139gr scenar and 43.5 gr ADI2209, clocked at 2720fps with 0.0004" case head expansion, 8SD, 18ES. 44.1gr started giving erratic velocity and 5-6 ten...
  13. C

    Hoover 136gr projectile? The best 6.5 bullet so far?

    With the interest in the Matrix 150gr bullet and higher BC, why haven't the other manufacturers been able to duplicate the Hoover 136gr bullet? 130-140gr seems the best balance in a 53-55gr water case capacity. The heavier 150gr seems better suited to 6.5/284 loadings. Lapua touted the 136gr...
  14. C

    Hunting & Fishing Eberlestock Packs

    I use the G3 Phantom. I enjoy the option of being able to remove the backpack and use the scabbard only on short treks. Pack has the basic large main pouch with internal separator, with side pouches and small top pouch. More than enough room for my needs. TRG 42 fits perfectly and weight...
  15. C

    Cutting Edge 338, 375 & 50 BMG Projectiles

    Was looking forward to Tekapo this year and was quite disappointed that it wasn't being held. Hopefully there will be one next year. Have you had any experience with the 6.5mm cutting edge projectiles?