Recent content by experthunter017

We all know that reloading supplies have been hard to come by the past year, Here in Virginia it is no different, BUT I recently went home to visit my Parents in North east Pennsylvania, I hit the MOTHER LOAD, it was like I saw the holy grail, this is a back country store that has been family...

My 300 Wby mag is a weatherby mark V with a 28 in barrel, I am shooting 178 A-max with 84grains of H-1000 with a Federal primer 215. I am getting a velocity average of 3050FPS, I am at sea level and I was shooting on a day with a tem. of about 80 degrees. Now my buddy is shooting a Remington 700...

I use them in my 300 wby mag, and I get 1in group at 300 yds, I know that the reloading data will not be the same but the seating depth is at book length which 3.56 OAL so I hope this helps a little.

I use RCBS and Hornady dies, NOT a fan of lee at all, and I pick up brass from a range and glocks are shot there all the time and I never had any problem with glock bugle cases, I just run them through like normal and they are fine.

would it work with small mag primers in a 357mag?? and are they deadly? and would they work in a semi auto? I know it would not cycle but could you still do it for example in a glock 9mm?? I guess it would be the same as paintball with out the mess HAHAHA,

My vote would go as followed: 45 long colt didn't that win the old west 30-06 1903 Springfield in world war 1 and 2 (spring field was used in WW2 at the beginning with the marines and continued through out has a snipers weapon) and of course we all know it was used in the Grand, and is still...

I have the same old press my grandfather gave me and all I use is a rubber band to hold the primer catch tray, and primers I am using my grandfather from the 80 as long as they were stored property. Tell your coworker thank you, that is not cheap stuff

RCBS Uniflow Powder Measure with Standard Cylinder with stand

Can you use Winchester WST is a 9mm Lugar?? been doing some research and some people say NO and some people say yes but kinda want to throw it out there to see what other people thought. I am using 115gr FMJ.

Just got my hornady ultra sonic cleaner , I am curious what people out there are using in the there ultra sonic cleaner. I see there is ALOT of different brands of cleaning solution out there, but are any better then the rest?? and I read some where you can use vinegar and water, is that true...

i was also making brass this morning, took a little while to figure out but i got it down pat now, i think i made 75 peices out of 30-06 and i have 40 7.7 brass peices so i am set for a while, not to steal the thread very nice rifle.

i was also making brass this morning, took a little while to figure out but i got it down pat now, i think i made 75 peices out of 30-06 and i have 40 7.7 brass peices so i am set for a while, not to steal the thread very nice rifle.

I have 7.7 jap rifle i am trying to reload for. I have some factory brass and ammo but i want more rounds so i started to make them out of 30-06 brass, I trim them to 2.28 and then i place them in the FL sizer and work that for a while and when it has no problem going in to the die i trim them...

180gr spitzer 73.5 gr H-1000

I just pick up a 300 wby and i want to reload for it. I was courios if any one out there reloads for it and if so, what powder and bullet grain do you use and what works good for you. I live in Virginia and hunt here for bear and deear and i also go home to Pennsylvania to hunt bear and deer (...