Search results

Search the forum Search Articles
  1. p5200

    Gunsmithing Trouble fitting Weaver#61 bases on a Tikka t3 Deluxe in 270 win.

    Well, I found out anything before 2004 uses metric and anything after, uses 6-48 thread the only thing is I don't know how to tell how old mine is by the serial number. I bought mine new but, it was (old stock) and was sitting on the rack a long time. I got it home and removed the bolt to give...
  2. p5200

    Gunsmithing Trouble fitting Weaver#61 bases on a Tikka t3 Deluxe in 270 win.

    The factory aluminum clamp on rings are soft and allowed the scope to slide through them and also, the aluminum allen head screws that tighten to the base stripped out the heads. I found a set of Weaver #61 flat bottom bases that are suppose to work but, the screws feel like they might be too...
  3. p5200

    How tight should Tikka t3 deluxe wood stock recoil lug fit?

    Just checked your site heck I could have saved money and got epoxy included, Darn it I screwed up again.
  4. p5200

    How tight should Tikka t3 deluxe wood stock recoil lug fit?

    This is where I got the lug from https://tikkaperformance.com/index.php?route=product/product&product_id=448 I don't know if they can tell me how to go about bedding the lug or not I thought maybe I could use J&B Weld since I can get it local and it shouldn't take very much?. Wish I'd known...
  5. p5200

    How tight should Tikka t3 deluxe wood stock recoil lug fit?

    This is a new gun just (old stock) manufactured in 2007. I had a t3 lite 25-06 at one time in synthetic and it was a bear to get the barreled action out of the stock and back in. It seemed to be because of the recoil lug to stock fit. With this new t3 Deluxe model 270 win. in wood stock the...
  6. p5200

    Hornady A-Max 168gr. vs SMK 168gr. Rem. 700 AAC-SD

    for those that have tried both in this particular rifle, which one did you get the best, accuracy and consistency with at 100yd. groups? Thanks!
  7. p5200

    Hunting & Fishing Hornady A-Max 168gr. for white tail deer?

    I've been reloading with these for my .308 win. and was wondering if they would perform well enough on deer with average shots from 50-150yds. with loads in my 30-06? Thanks! PS I also, have some 150gr. Sierra GKs.
  8. p5200

    Rifle Scopes Sightron SII 36X42 brd satin finish Warranty Ques

    Re: Sightron SII 36X42 brd satin finish Warranty Ques I looked this scope up on Midway USA and it also, said fully transferable life time warranty for who ever owns it there too! Thanks!
  9. p5200

    Rifle Scopes Sightron SII 36X42 brd satin finish Warranty Ques

    I made a trade online for one of these model scopes but, no matter how I adjust the AO through it's 720 degree rotation it just will not focus clear at any range/setting seems to look way to white with no contrast or clarity. I compared it to my Weaver t36 36x40 and the Weaver is so much clearer...
  10. p5200

    Rifle Scopes Sightron 36x42brd scope lens covers?

    Does anyone know of a place I can order a set of covers/flip ups for this scope? Thanks! http://www.midwayusa.com/product/630380/...ctive-1-8-moa-d
  11. p5200

    remmington 700 or tikka t3 in .300 win mag?

    Re: remmington 700 or tikka t3 in .300 win mag? For out of the box accuracy no plans to mod, I would go with Tikka I had a 25-06 t3 lite that was a real tack driver!
  12. p5200

    Speer Gold Medal Match 168gr. hpbt

    Has anyone loaded this bullet for 308 Win and if so, how well did it perform for you? I was just curious cause I found a box locally but haven't got a chance to load and try any yet. Thanks!
  13. p5200

    Gunsmithing Trouble removing Burris scope bases need advice

    Re: Trouble removing Burris scope bases need advice <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body">Buy some torx bits. Put them on the screw head and tap with a hammer so that it'll seat at the base of the socket. Heat up...
  14. p5200

    Gunsmithing Trouble removing Burris scope bases need advice

    Re: Trouble removing Burris scope bases need advice Will try thanks, if that doesn't work I guess I could drill the screw heads off lift the bases off heat again closer to receiver and use a pair of vice grips.
  15. p5200

    Gunsmithing Trouble removing Burris scope bases need advice

    I would like to remove the 2 piece base set from my Marlin MR-7 and put a one piece base like a picatinny so I can mount my scope a little closer to my eye as I have to stretch my neck now when shooting from a bench. The problem is, the bases and rings both have torx head screws and so far, I...
  16. p5200

    Rem. 700 SPS AAC-SD .308 Brake options?

    Re: Rem. 700 SPS AAC-SD .308 Brake options? Thanks very much folks for all the suggestions, I'll have to look them all up and make a choice.
  17. p5200

    Rem. 700 SPS AAC-SD .308 Brake options?

    I would like to get a brake that performs really well at preventing muzzle jump. I'm not concerned with felt recoil reduction or how loud it is since I don't shoot at public ranges. Just looking for suggestions and this gun will mostly be used for casual paper punching. Thanks!
  18. p5200

    suggestions needed for rear shooting bags

    Re: suggestions needed for rear shooting bags Thanks for the suggestions folks!
  19. p5200

    suggestions needed for rear shooting bags

    Re: suggestions needed for rear shooting bags <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chiller</div><div class="ubbcode-body">Is the for the bench or in the dirt? </div></div> I use a Caldwell Stable Table shooting bench sorry, I should have mentioned that.
  20. p5200

    suggestions needed for rear shooting bags

    I put my Rem. 700 sps AAC-SD .308 in a Bell and Carlson Tactical Medalist A2 style stock and would like to get a better /taller rear bag now. I just have the cheap Caldwell bag right now and was thinking about maybe getting a Protektor brand but, there are so many different ones to choose from I...
Top Bottom
Back
Home
Forums
Merch
Alerts