Search results

Re: Official 2013 Sniper's Hide Cup 5/23 - 5/25 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body">You have 5 minutes, but essentially, yes it's a lost brass match, you can mark it and try going back after your segment is...

Re: varget lot to lot variances <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: inode</div><div class="ubbcode-body">I see people mention all the time lot to lot variations. I'm not convinced that it's a lot to lot issue. Rather, it's an issue of how much moisture...

Re: 308 175 smk Varget troubles <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rookie</div><div class="ubbcode-body">I load 44.9gr but am putting bullets at 2.835 COAL. The longer seating will reduce pressure. </div></div> I thought longer seating in rifle...

Re: Power Pro 2000MR and 210gr SMK's <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BCP</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: d_striker</div><div class="ubbcode-body"> Can you share your...

Re: Power Pro 2000MR and 210gr SMK's <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BCP</div><div class="ubbcode-body">I didn't have luck with it but you might. I did get it to 2400fps out of an 18" but there were obvious pressure signs. Best use I found for...

Re: Power Pro 2000MR and 210gr SMK's Gotta be someone playing around with this powder and the heavier .308 bullets...

Has anyone played with this powder and the following bullets: 210 SMK's 208 AMAX 208 BTHP

Re: Alliant 2000MR Good info in this thread. Based on reports, it seems this powder works better for the heavier bullets rather than the lighter ones.

Re: Alliants new Power Pro 2000mr Finally got around to testing out this powder in my sps aac sd. 20" 1:10". I only tested two different charges. 48 gr power pro 2000mr 180 gr Accubond 2.810" Virgin win brass Federal 210m Average velocity-2628 fps I didn't get a good group from this...

Re: New Winchester 308 brass Full length size, tumble, chamfer, deburr flash hole, load, shoot, neck size

Re: Pulled M118 Accuracy Thanks for the clarification. I was unaware of that.

Re: Pulled M118 Accuracy <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Kevlars</div><div class="ubbcode-body">which ones were larger in group size the M118 or the 175SMK or did I totally misread this thread? </div></div> You didn't misread.. I mistyped. I...

Re: Pulled M118 Accuracy Good to know. I wonder what kind of groups he was getting with new 175's. I ordered 500 to try out. I'll post a review as well.

Re: Pulled M118 Accuracy <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: texasaero</div><div class="ubbcode-body">They shoot fine. I inspect them for burrs and load em up for practice. I still use new for competition for no better reason than peace of mind...

Has anyone used pulled M118 bullets? If so, how was the accuracy compared to new 175 smk?

Re: Lapua lot consistency <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: roaddogdaddy</div><div class="ubbcode-body">Lapua is some of the best and you pay for it. The Norma brass is also very good. I personally like Remington best for the price and general...

Re: Confused - Two different Sierra .308 175gr HPBT ? Did you notice a different point of impact between the two different bullets with the same load?

I just started buying 308 lapua brass. How is the consistency from lot to lot?

Came into some of these for my .308 SPS Tac. I have Varget and Tac to play with. I'm thinking TAC might be a good choice due to its density and the really long bullet that the Accubond is. I usually single load though and can load out past 2.910 before I'm to the lands but will probably keep it...