Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I am helping a friend build a savage LR rifle in 7mm RM, and he wants to have detachable mags.... Anyone know of some bottom metal that will work with a savage 116 action? (that is what he has to start with: http://www.savagearms.com/116fcss.htm ) Thanks.
I have a McMillan A5 and was wondering if it would be possible to inlet it for a Badger long action? It is inletted for a Stiller Tac 300 action/Rem L/A, I imagine that the inletting would be along the same lines as to what you do to an AICS but I am not gunsmith.
Is it necessary to lap the i.d. bore on a Rem 700 when blue printing the action. IF so, where does one go about getting the mandrel for the action and what grit compound would be best? thanks
I have a rem 700 (6.5 x 47) that, i think, the "timing is off." Please correct me if the following problem is not that, and, if it is...how to fix it. When you chamber a round and close the bolt (handle/knob as far 'down' as it will go) and attempt to pull trigger, SOMETHING impedes the firing...
I am having a hell of a time getting info on what one piece 20moa base will work for the Montana Rifle company 1999 long action. I was originally told Win Mod 70 base..but that sh*t aint workin'! Any info would be greatly appreciated.
Was thinking about building a 338 Lapua in AICS using a Lawton 8500 action. Problem is, the diameter of the action is larger than Remington and I'm not sure it would work. Anyone done this before? Other acceptable actions for 338 Lapua that will fit an AICS?
I hope my google-fu is weak but I haven't found what I am looking for. I have a .308 rifle that is built off of a Sako action and I would like to add a detachable magazine to it. I haven't found any Sako kits, so plan B is to figure out what existing magazine conversion kits are closest to...
Has anybody run a 6.5x284 in a long action remington set up with a DBM? Either HS precision or Badger? Let me know what works and what doesn't. AHA Rad
Well here they are. Action came disassembled but I did throw the firing pin and shroud onto the bolt. I went with the standard Surgeon bolt handle and no base yet. Scope base holes are set to the standard Remington short action spacing and have two small holes to pin the rail as well. The lug is...
just wondering i realise that truing a standard factory remmy action is the norm to squezze out the accuracy but, I was wondering if you took say a surgeon action and a shilen barrel, would there be any machining in this or would it just be a Q of mating barrel and action and headspacing?
I have a Rem. 700 long action that was originaly a .270 Win. I have been looking into making it into a .338 LM but am having a little trouble in finding what exactly I need to Modify on the reciver. Is there any company that dose this type of work. Thanks